EN ISO 8130-10:2021
(Main)Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)
Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)
This document specifies a method for determining the mass fraction in per cent (%) of a sprayed coating powder which is deposited on a test item under known spray gun and environmental conditions.
The method is applicable to powders applied by corona or tribo charging and can be used to compare the deposition efficiency of different powders with the same or different gun with the same powder.
This method is only used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.
Pulverlacke - Teil 10: Bestimmung des Abscheide-Wirkungsgrades (ISO 8130-10:2021)
Dieses Dokument legt ein Verfahren zum Bestimmen des Massenanteils in Prozent (%) an versprühtem Pulverlack fest, der auf einem Standard-Prüfziel abgeschieden wird, wenn Pulver aus einer Sprühpistole auf das Ziel unter bekannten Umgebungsbedingungen gesprüht wird.
Das Verfahren ist anwendbar auf Pulver, die durch Coronaaufladung oder durch Triboaufladung aufgebracht werden, und kann angewendet werden, um den Abscheide-Wirkungsgrad unterschiedlicher Pulver mit derselben Pistole oder unterschiedlichen Pistolen mit dem gleichen Pulver zu vergleichen.
Das Verfahren wird nur dann zum Vergleichen angewendet, wenn Pulver oder Pistolen nacheinander bewertet werden, da der Einfluss der Umgebung und der Geräte sich in Abhängigkeit von Zeit und Ort signifikant ändern kann.
Poudres pour revêtement - Partie 10: Détermination du rendement d'application (ISO 8130-10:2021)
Le présent document spécifie une méthode pour la détermination de la fraction massique en pourcentage (%) d'une poudre pour revêtement pulvérisée qui est déposé sur un élément soumis à l'essai à partir d'un pistolet pulvérisateur dans des conditions environnementales connues.
La méthode convient aux poudres appliquées par effet corona ou par triboélectricité et peut être utilisée pour comparer le rendement d'application de différentes poudres avec le même pistolet ou différents pistolets sur la même poudre.
Cette méthode n'est utilisée qu'à des fins de comparaison lorsque les poudres ou les pistolets sont évalués consécutivement, car l'influence de l'environnement et du matériel peut varier sensiblement avec le temps et en fonction de l'emplacement.
Praškasti premazi - 10. del: Določanje učinkovitosti nanašanja (ISO 8130-10:2021)
General Information
- Status
- Published
- Publication Date
- 13-Jul-2021
- Withdrawal Date
- 30-Jan-2022
- Technical Committee
- CEN/TC 139 - Paints and varnishes
- Drafting Committee
- CEN/TC 139 - Paints and varnishes
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 14-Jul-2021
- Completion Date
- 14-Jul-2021
Relations
- Effective Date
- 24-Mar-2020
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 12-Feb-2026
Overview
EN ISO 8130-10:2021 outlines a standard method for the determination of deposition efficiency in sprayed coating powders. Developed by CEN and ISO as part of the ISO 8130 series, this standard specifies procedures for measuring the mass fraction (percentage) of a coating powder that is successfully deposited onto a test item, under defined environmental and spray gun conditions. It applies to powders applied using either corona or tribo charging methods and enables reliable efficiency comparison between different powders or spray guns, provided tests are conducted consecutively and under similar conditions.
Deposition efficiency is a critical parameter for powder coating processes, influencing material costs, coating quality, environmental impact, and production efficiency. Adhering to this standardized method helps ensure consistent, repeatable, and comparable results across different laboratories and manufacturing sites.
Key Topics
- Deposition Efficiency: Proportion of powder mass deposited versus sprayed, expressed as a percentage.
- Test Conditions: Control and documentation of environment (temperature, humidity), spray gun type (corona or tribo), and operational settings.
- Comparative Analysis: Method allows for comparison when powders or guns are evaluated consecutively with the same environmental and equipment setup.
- Test Procedure: Includes sample preparation, use of specified equipment, and stepwise instructions for spraying and measurement.
- Reporting Requirements: Thorough documentation of test conditions, powder characteristics, equipment parameters, and deviations is mandatory for traceability and result validation.
- Applicability Limitations: Results are only comparable under strictly controlled, repeatable circumstances due to environmental and equipment variability.
Applications
EN ISO 8130-10:2021 is essential for organizations involved in the manufacturing, application, and quality control of powder coatings, such as:
- Coating Powder Manufacturers: To compare and optimize product deposition rates, reduce waste, and ensure product performance.
- Industrial Coat Shops: For equipment selection, process setup, and quality assurance of powder spraying operations.
- Research and Development: To evaluate prototype powders and application equipment within controlled testing environments.
- Third-party Testing Laboratories: To standardize measurement protocols for client benchmarking and certification programs.
- Process Optimization: Identifying the most efficient combinations of powders and guns to maximize material usage and minimize overspray, reducing environmental impact and cost.
Related Standards
- ISO 8130-14: Coating powders - Vocabulary. Provides definitions relevant to terms used in powder coating standards.
- ISO 15528: Paints, varnishes, and raw materials for paints and varnishes - Sampling. Describes standard procedures for obtaining representative samples for analysis.
- ISO 8130 Series: Includes further test methods for coating powders such as flow characteristics, particle size, and other performance metrics important for comprehensive powder coating quality control.
Keywords: EN ISO 8130-10:2021, coating powder, deposition efficiency, powder spraying, corona charging, tribo charging, powder coating standards, industrial coatings, CEN, ISO, test methods, process optimization, quality control, standardization.
By adhering to EN ISO 8130-10:2021, manufacturers and users of coating powders can achieve consistent, repeatable evaluations of application efficiency, supporting improved process control and inter-laboratory comparability.
Frequently Asked Questions
EN ISO 8130-10:2021 is a standard published by the European Committee for Standardization (CEN). Its full title is "Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)". This standard covers: This document specifies a method for determining the mass fraction in per cent (%) of a sprayed coating powder which is deposited on a test item under known spray gun and environmental conditions. The method is applicable to powders applied by corona or tribo charging and can be used to compare the deposition efficiency of different powders with the same or different gun with the same powder. This method is only used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.
This document specifies a method for determining the mass fraction in per cent (%) of a sprayed coating powder which is deposited on a test item under known spray gun and environmental conditions. The method is applicable to powders applied by corona or tribo charging and can be used to compare the deposition efficiency of different powders with the same or different gun with the same powder. This method is only used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.
EN ISO 8130-10:2021 is classified under the following ICS (International Classification for Standards) categories: 87.040 - Paints and varnishes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8130-10:2021 has the following relationships with other standards: It is inter standard links to EN ISO 8130-10:2010, ISO 8130-14:2019, EN 13001-3-5:2025, ISO 8130-10:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8130-10:2021 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 8130-10:2012
SIST ISO 8130-10:1998
Praškasti premazi - 10. del: Določanje učinkovitosti nanašanja (ISO 8130-10:2021)
Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)
Pulverlacke - Teil 10: Bestimmung des Abscheide-Wirkungsgrades (ISO 8130-10:2021)
Poudres pour revêtement - Partie 10: Détermination du rendement d'application (ISO
8130-10:2021)
Ta slovenski standard je istoveten z: EN ISO 8130-10:2021
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 8130-10
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-10:2010
English Version
Coating powders - Part 10: Determination of deposition
efficiency (ISO 8130-10:2021)
Poudres pour revêtement - Partie 10: Détermination Pulverlacke - Teil 10: Bestimmung des Abscheide-
du rendement d'application (ISO 8130-10:2021) Wirkungsgrades (ISO 8130-10:2021)
This European Standard was approved by CEN on 28 April 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-10:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 8130-10:2021) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-10:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8130-10:2021 has been approved by CEN as EN ISO 8130-10:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 8130-10
Second edition
2021-06
Coating powders —
Part 10:
Determination of deposition efficiency
Poudres pour revêtement —
Partie 10: Détermination du rendement d'application
Reference number
ISO 8130-10:2021(E)
©
ISO 2021
ISO 8130-10:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 8130-10:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 3
8 Expression of results . 4
9 Precision . 4
10 Test report . 4
ISO 8130-10:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...