Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage

This test standard defines methods to cover the detection and measurement of partial discharge (corona) under an applied test voltage, including the determination of partial discharges (corona) inception and extinction voltages as the test voltage is raised and lowered, of electrical cables for aircraft use.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-Aussetzspannung

Diese Prüfnorm legt Verfahren fest, die den Nachweis und die Messung der Teilentladung (Corona) elektrischer
Leitungen für die Verwendung in Luftfahrzeugen unter einer angelegten Prüfspannung umfassen, einschließlich
der Bestimmung der Teilentladungs-(Corona-)einsetzspannung und -aussetzspannung, wenn die
Prüfspannung erhöht oder abgesenkt wird.
Sie muss in Verbindung mit EN 3475-100 angewendet werden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307 : Tension d'extinction corona

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 307. del: Napetost koronske izgube

Ta preskusni standard definira metode, ki pokrivajo zaznavanje in merjenje delne razelektritve (korone) pod testno napetostjo, vključno z določevanjem delnih razelektritev (koron) začetka in ugasnitve napetosti, kadar je preskusna napetost dvignjena in spuščena, električnih kablov za uporabo v zračnih plovilih. Uporablja se skupaj z EN 3475-100.

General Information

Status
Withdrawn
Publication Date
06-Jul-2010
Withdrawal Date
20-Jan-2026
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jun-2015
Completion Date
21-Jan-2026
Ref Project
SIST EN 3475-307:2010 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage

Relations

Replaces
EN 3475-307:2005 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
Effective Date
07-Nov-2009
Replaced By
EN 3475-307:2015 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
Effective Date
08-Jun-2022
Refers
EN 3475-100:2010 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
Effective Date
28-Jan-2026
Referred By
EN 3375-011:2017 - Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard
Effective Date
28-Jan-2026
Referred By
EN 2084:2018 - Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
Effective Date
28-Jan-2026
Referred By
EN 2713-006:2006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4611-004:2018 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 2713-010:2006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4612-005:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 2714-004:2006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4612-008:2011 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4604-010:2011 - Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4612-006:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 2714-010:2006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard
Effective Date
28-Jan-2026
Referred By
EN 4608-001:2019 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification
Effective Date
28-Jan-2026

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

NSF-ISR

NSF International Strategic Registrations.

ANAB United States Verified
Visit Website

Orion Registrar Inc.

US-based certification body for management systems.

ANAB United States Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 3475-307:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage". This standard covers: This test standard defines methods to cover the detection and measurement of partial discharge (corona) under an applied test voltage, including the determination of partial discharges (corona) inception and extinction voltages as the test voltage is raised and lowered, of electrical cables for aircraft use. It shall be used together with EN 3475-100.

This test standard defines methods to cover the detection and measurement of partial discharge (corona) under an applied test voltage, including the determination of partial discharges (corona) inception and extinction voltages as the test voltage is raised and lowered, of electrical cables for aircraft use. It shall be used together with EN 3475-100.

EN 3475-307:2010 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 3475-307:2010 has the following relationships with other standards: It is inter standard links to EN 3475-307:2005, EN 3475-307:2015, EN 3475-100:2010, EN 3375-011:2017, EN 2084:2018, EN 2713-006:2006, EN 4611-004:2018, EN 2713-010:2006, EN 4612-005:2019, EN 2714-004:2006, EN 4612-008:2011, EN 4604-010:2011, EN 4612-006:2019, EN 2714-010:2006, EN 4608-001:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 3475-307:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-AussetzspannungSérie aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307: Tension d'extinction coronaAerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-307:2010SIST EN 3475-307:2010en01-september-2010SIST EN 3475-307:2010SLOVENSKI
STANDARDSIST EN 3475-307:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3475-307
July 2010 ICS 49.060 Supersedes EN 3475-307:2005English Version
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307 : Tension d'extinction corona
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-Aussetzspannung This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-307:2010: ESIST EN 3475-307:2010
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...