iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1551:2000

(Main)

Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity

Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity

This standard applies to self propelled lift trucks, the rated capacity of whic h exceeds 10000kg.  This standard does not cover: Trucks powered by natural gas, trucks operated by remote control, trucks with elevating operator position.

Sicherheit von Flurförderzeugen - Kraftbetriebene Flurförderzeuge über 10 000 kg Tragfähigkeit

Diese Norm gilt für motorkraftbetriebene Flurförderzeuge mit einer Tragfähigkeit über 10000 kg. Diese Europäische Norm gilt nicht für: Flurförderzeuge, die mit Erdgas betrieben werden, Flurförderzeuge mit Fernsteuerung, Flurförderzeuge mit hebbarem Fahrerplatz.

Sécurité des chariots de manutention - Chariots automoteurs Plus de 10 000 kg

La présente norme concerne les chariots élévateurs automoteurs dont la capacité nominale est supérieure à 10 000 kg. La présente ne couvre pas: les chariots fonctionnant au gaz naturel, les chariots actionnés par télécommande, les chariots à poste de conduite élevable.

Varnost strojev - Vozila za talni transport - Motorna vozila z nosilnostjo več kot 10000 kg

General Information

Status
Withdrawn
Publication Date
18-Apr-2000
Withdrawal Date
21-Aug-2012
ICS
53.060 - Industrial trucks
Technical Committee
CEN/TC 150 - Industrial trucks - Safety
Drafting Committee
CEN/TC 150/WG 1 - Trucks over 10 t capacity
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
22-Aug-2012
Completion Date
22-Aug-2012
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 1551:2002 - Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity

Relations

Replaced By
EN ISO 3691-1:2012 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011)
Effective Date
24-Sep-2011
EN 1551:2002EN 1551:2002
PreviousNext
Standard
EN 1551:2002
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2002
9DUQRVWVWURMHY9R]LOD]DWDOQLWUDQVSRUW0RWRUQDYR]LOD]QRVLOQRVWMRYHþNRW
NJ
Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity
Sicherheit von Flurförderzeugen - Kraftbetriebene Flurförderzeuge über 10 000 kg
Tragfähigkeit
Sécurité des chariots de manutention - Chariots automoteurs Plus de 10 000 kg
Ta slovenski standard je istoveten z: EN 1551:2000
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 1551:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 23308-3:2025(Main)
Energy efficiency of industrial trucks - Test methods - Part 3: Container handling lift trucks (ISO 23308-3:2025)
SIST EN ISO 23308-3:2025

This document specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053-1:
—     variable-reach container handler;
—     counterbalance container handler.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23308-2:2025(Main)
Energy efficiency of industrial trucks - Test methods - Part 2: Operator-controlled self-propelled trucks, burden and personnel carriers and towing tractors (ISO 23308-2:2025)
SIST EN ISO 23308-2:2025

This document specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053-1:
—     counterbalance lift truck;
—     articulated counterbalance lift truck;
—     reach truck (with retractable mast or fork arm carriage);
—     straddle truck;
—     pallet-stacking truck;
—     pallet truck;
—     platform and stillage truck;
—     end-controlled pallet truck;
—     order-picking truck;
—     centre-controlled order-picking truck;
—     towing tractor;
—     pushing tractor;
—     burden and personnel carrier;
—     towing and stacking tractor;
—     side-loading truck (one side only);
—     lateral-stacking truck (both sides);
—     lateral-stacking truck (three sides);
—     multi-directional lift truck.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23308-1:2025(Main)
Energy efficiency of industrial trucks - Test methods - Part 1: General (ISO 23308-1:2025)
SIST EN ISO 23308-1:2025

This document specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereinafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included.
ISO 23308-2, ISO 23308-3, ISO 23308-4 and ISO 23308-6 contain additional, truck-specific requirements which build on those expressed in this document.
This document is applicable to the in-use phase of the product life cycle.
It applies to the following truck types as defined in ISO 5053-1:
—     counterbalance lift truck;
—     articulated counterbalance lift truck;
—     reach truck (with retractable mast or fork arm carriage);
—     straddle truck;
—     pallet-stacking truck;
—     pallet truck;
—     platform and stillage truck;
—     end-controlled pallet truck;
—     order-picking truck;
—     centre-controlled order-picking truck;
—     towing tractor;
—     pushing tractor;
—     burden and personnel carrier;
—     lorry-mounted truck;
—     towing and stacking tractor;
—     side-loading truck (one side only);
—     variable-reach container handler;
—     counterbalance container handler;
—     lateral-stacking truck (both sides);
—     lateral-stacking truck (three sides);
—     multi-directional lift truck;
—     variable-reach truck;
—     platform truck;
—     double-stacker;
—     rough-terrain truck;
—     rough-terrain variable-reach truck;
—     slewing rough-terrain variable-reach truck;
—     stacking high-lift straddle carrier.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23308-6:2025(Main)
Energy efficiency of industrial trucks - Test methods - Part 6: Container straddle carrier (ISO 23308-6:2025)
SIST EN ISO 23308-6:2025

This document specifies the methods of energy consumption measurement for the following type of industrial trucks as defined in ISO 5053-1:
—     stacking high-lift straddle carrier (hereafter referred to as straddle carrier), as defined in ISO 5053-1:2020, 3.19.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1459-5:2020+A1:2025(Main + Amendment)
Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
SIST EN 1459-5:2021+A1:2025

This document specifies requirements for the truck side of the attachment interface of rough-terrain non-slewing and slewing variable reach trucks (hereafter referred to as "trucks") dealt with in EN 1459-1:2017+A1:2020, EN 1459-2:2015+A1:2018 and EN 1459-4:2020.
This document covers the interface for the attachments fitted to the telescopic boom carriage or mounted on the forks when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document does not cover:
- interface for interchangeable equipment designed for lifting person(s) (covered by EN 1459-3:2015);
- interface for equipment for container handling (e.g. spreader);
- interface for equipment permanently installed on the machine and not intended to be removed by the user.
NOTE In this case, equipment becomes part of the truck.
This document does not give requirements for the completed assembly of a truck fitted with an attachment. This document does not address risks to parts of the truck other than the interface with the attachment.
This document is not applicable to interfaces manufactured before the date of its publication.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1459-1:2025(Main)
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
SIST EN 1459-1:2025

This document specifies the safety requirements of self-propelled rough-terrain variable-reach trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted.
For the purpose of this document, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain.
Fork arms are considered to be part of the truck. Trucks can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers).
This document deals with all the significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document does not apply to:
—   slewing rough-terrain variable-reach trucks covered by EN 1459 2:2015+A1:2018;
—   rough terrain variable-reach tractors covered by CEN/TS1459-8;
—   industrial variable reach trucks covered by EN ISO 3691 2:2016;
—   lorry-mounted variable-reach trucks covered by ISO 20297 1:2017;
—   variable-reach trucks fitted with tilting or elevating operator position;
—   mobile cranes covered by EN 13000:2010+A1:2014;
—   machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series);
—   trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions;
—   trucks designed primarily for container handling;
—   trucks on tracks;
—   trucks with articulated chassis;
—   attachments.
This document does not address sound power level.
This document does not address hazards linked to:
—   operation of the truck from a position other than the normal operating position or the remote control;
—   hybrid power systems;
—   gas power systems;
—   gasoline engine systems;
—   battery power systems.
This document does not address hazards which may occur:
a)   when handling suspended loads which may swing freely (additional requirements are given in EN 1459 4: 2020);
b)   when using trucks on public roads;
c)   when operating in potentially explosive atmospheres (additional requirements are given in EN 1755:2015);
d)   when operating underground;
e)   when towing trailers;
f)   when fitted with a personnel work platform (additional requirements are given in EN 1459 3:2015 and EN 1459 9:2021);
g)   when using systems capable of controlling the speed of the truck as set by the operator (cruise-control).
This document does not provide a method of calculation for fatigue and strength of material.
This document is not applicable to trucks manufactured before the date of its publication.

  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1755:2024(Main)
Industrial trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
SIST EN 1755:2024

This document is applicable to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053-1:2020 including their load handling devices and attachments (hereafter referred to as trucks) intended for use in potentially explosive atmospheres.
NOTE 1   Attachments mounted on the load carrier or on fork arms which are removable by the user are not considered to be a part of the truck.
This document specifies supplementary technical requirements for the prevention of the ignition of an explosive atmosphere of flammable gases, vapours, mists or dusts by industrial trucks of equipment group II and equipment category 2G, 3G, 2D or 3D.
NOTE 2   The relationship between an equipment category (hereafter referred to as category) and the corresponding zone (area classification) is shown in informative Annex B.
This document does not apply to:
-   trucks of equipment group I;
-   trucks of equipment group II, equipment category 1;
-   trucks intended for use in potentially explosive atmospheres with hybrid mixtures;
-   protective systems.
This document does not apply to trucks intended for use in potentially explosive atmospheres of carbon disulfide (CS2), carbon monoxide (CO) and/or ethylene oxide (C2H4O) due to the special properties of these gases.
Technical requirements relating to lithium-ion batteries and fuel cells as energy sources are not given in this document due to their specific hazards.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16307-5:2023(Main)
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
SIST EN 16307-5:2024

This document specifies requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5:2015.
This document is intended to be used in conjunction with EN ISO 3691-5:2015.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to pedestrian-propelled trucks, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   protection against crushing, shearing and trapping;
-   electrical requirements;
-   electromagnetic immunity.
These requirements are supplementary to those stated in EN ISO 3691-5:2015 with the addition of requirements for the following hazard:
-   electromagnetic immunity (external radiation).
This document partially replaces the following requirement of EN ISO 3691-5:2015:
-   electrical requirements.
This document specifies supplementary requirements to EN ISO 3691-5:2015:
-   protection against crushing, shearing and trapping;
-   information for use (instruction handbook and marking).
This document does not specify supplementary requirements to EN ISO 3691-5:2015:
-   static electricity;
-   radiation;
-   general principles for the drafting of instructions;
-   sales literature.
Annex A (informative) contains the list of significant hazards covered by this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3691-4:2023(Main)
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
SIST EN ISO 3691-4:2023

This document specifies safety requirements and the means for their verification for driverless industrial trucks (hereafter referred to as trucks) and their systems.
Examples of driverless industrial trucks (trucks as defined in ISO 5053‑1:2020) include: “automated guided vehicle”, “autonomous mobile robot”, “bots”, “automated guided cart”, “tunnel tugger”, “under cart”, etc.
This document is also applicable to driverless industrial trucks which are provided with:
—    automatic modes which either require operators’ action(s) to initiate or enable such automatic operations;
—    the capability to transport one or more riders (which are neither considered as drivers nor as operators);
—    additional manual modes which allow operators to operate the truck manually; or
—    a maintenance mode which allows manual operation of truck functions for maintenance reasons.
This document is not applicable to trucks solely guided by mechanical means (rails, guides, etc.) or to remotely-controlled trucks, which are not considered to be driverless trucks.
For the purposes of this document, a driverless industrial truck is a powered truck, which is designed to operate automatically. A driverless truck system comprises the control system, which can be part of the truck and/or separate from it, guidance means and power system. Requirements for power sources are not covered in this document.
The condition of the operating zone has a significant effect on the safe operation of the driverless industrial truck. The preparations of the operating zone to eliminate the associated hazards are specified in Annex A.
This document is applicable to all significant hazards, hazardous situations or hazardous events during all phases of the life of the truck (ISO 12100:2010, 5.4), as listed in Annex B, relevant to the applicable machines when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
In particular, this document does not apply to significant hazards related to:
—    noise;
—    vibrations;
—    ionising and non-ionising radiation;
—    laser radiation;
—    sales literature (commercial documents);
—    declaration of vibrations transmitted by mobile machinery.
It does not apply to additional hazards that can occur:
—    during operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
—    during operation in nuclear environments;
—    from trucks intended to operate in public zones (see in particular ISO 13482:2014);
—    during operation on a public road;
—    during operation in potentially explosive environments;
—    during operation in military applications;
—    during operation with specific hygienic requirements;
—    during operation in ionizing radiation environments;
—    during the transportation of (a) person(s) other than (the) intended rider(s);
—    when handling loads the nature of which can lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials);
—    for rider positions with elevation function higher than 1 200 mm from the floor/ground to the platform floor.
This document does not contain safety requirements for trailer(s) being towed behind a truck.
This document does not contain safety requirements for elevated operator trucks.
This document does not apply to trucks manufactured before the date of its publication.

  • Standard
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3691-3:2016/A1:2023(Amendment)
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
SIST EN ISO 3691-3:2017/A1:2023

2021-07-26 JF: Through decision 429/2021 taken on 2021-07-08, TC decided to decouple the WI from the EU legislation

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day