Abstract

This document specifies photometric methods of test for comparing in the visible spectrum:
the tinting strength of two similar coloured pigments dispersed in an alkyd resin without a drier;
the scattering power of two white pigments of the same type dispersed in an alkyd resin without a drier.
This document does not apply to the comparison of coloured pigments that on reduction differ greatly in colour.

Status
Published
Publication Date
20-Oct-2026
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Oct-2026
Completion Date
21-Oct-2026

Buy Documents

Standard

EN ISO 787-24:2026

English language (20 pages)
Preview
Preview
e-Library read for
×1 day

EN ISO 787-24 is a CEN standard based on ISO 787-24 for photometric comparison of pigments and extenders. It specifies how to measure the relative tinting strength of similar coloured pigments and the relative scattering power of white pigments dispersed in alkyd resin without a drier, using an instrumental method rather than visual matching.

What does EN ISO 787-24 specify?

EN ISO 787-24 covers photometric methods for comparing two cases in the visible spectrum: similar coloured pigments dispersed in a white pigment paste, and white pigments of the same type dispersed in a black pigment paste. The method is intended for lab comparison work where a measurable, repeatable result is needed.

EN ISO 787-24 does not apply to coloured pigments that differ greatly in colour when reduced. In practice, that keeps the method focused on like-for-like comparisons where the photometric result is meaningful.

The document is organized into the following main clauses and annexes.

Part of the documentWhat it covers
Clause 1Scope
Clause 2Normative references
Clause 3Terms and definitions
Clause 4Principle
Clauses 5 to 7Materials, apparatus and sampling
Clause 8Procedure for tinting strength and scattering power
Clause 9Expression of results
Clause 10Test report
Annex AKubelka-Munk relations, reflectivity correction and related coefficients
Annex BK/S values as a function of measured ϱ or R

What are the key requirements of EN ISO 787-24?

Photometric basis and comparison sets

EN ISO 787-24 uses an instrumental comparison between a test pigment and an agreed reference pigment. Clause 4 states that the method is an alternative to the visual comparison methods in ISO 787-16 and ISO 787-17, which matters when a laboratory wants a photometer-based result instead of a visual judgment.

For coloured pigments, Clause 4.2 requires equal masses of the test and reference pigments to be dispersed separately in the same mass of the same white pigment paste. The film is then measured at the wavelength where reflectivity ϱ or reflectance factor R reaches a minimum, and the relative tinting strength is calculated from the corresponding K/S values.

For white pigments, Clause 4.3 requires equal masses of the test and reference pigments to be dispersed separately in the same mass of the same black pigment paste. The measurement is made at 550 nm or with a Y-filter, and the relative scattering power is calculated from the corresponding K/S values.

The document allows another tinting-strength criterion, or other white-pigment measurement wavelengths, when the interested parties agree. That flexibility matters in product development or buyer-supplier agreements, but the chosen criterion needs to be stated in the test report.

Materials, apparatus and sampling

Clause 5 defines the reference pastes used to make the comparisons reproducible. The white pigment paste is based on titanium dioxide, alkyd resin and calcium stearate, and the alkyd resin itself has stated requirements for acid value, viscosity and hydroxyl content. The black pigment paste is built from carbon black, alkyd resin and fumed silica, with defined requirements for the carbon black and the fumed silica.

This matters because the paste is part of the measuring system, not just a carrier. If the paste properties change, the optical comparison changes too.

Clause 6 specifies the equipment needed: a triple-roll mill, an automatic muller, paste film holders, and either a spectrophotometer or a tristimulus colorimeter. The measuring setup may include or exclude gloss, and the document also allows paste films on a moving carrier without contact if the film stays smooth and the measuring distance is controlled.

Clause 7 requires a representative sample taken in accordance with ISO 15528. In practice, the result is only as representative as the sample used for the test.

Procedure, calculation and reporting

Clause 8 gives the working procedure for both test types. For tinting strength, the test sample is mixed with the white pigment paste and ground in stages on the muller; the reference pigment is prepared the same way. For scattering power, the white test pigment mass is calculated from its density, then mixed with the black pigment paste and processed in the same staged way.

Clause 8 also fixes the main measurement conditions. For coloured pigments, the spectrophotometer scans between 400 nm and 700 nm until the minimum ϱ or R is found. For white pigments, the measurement is taken at 550 nm or with a CIE Y-filter.

Clause 9 gives the calculation route. The measured ϱ or R values are converted to K/S using Annex B, and if gloss was included, 0.04 is subtracted before using the table. The final result is reported as a percentage relative to the agreed reference pigment.

Clause 10 lists the information that has to go into the test report. That includes the tested product and reference pigment, the measuring geometry, any deviation from the method, the muller settings when changed, any unusual observations, and the calculated relative tinting strength or relative scattering power.

What terms does EN ISO 787-24 define?

  • Tinting strength - the ability of a colourant to colour other materials because of its absorptive power.
  • Relative tinting strength - the percentage ratio of the tinting strength of the test colourant to that of the agreed reference colourant.
  • Scattering power - the ability of a pigmented medium to partly diffuse incident light.
  • Relative scattering power - the percentage ratio of the scattering index of the test white pigment to that of the agreed reference white pigment.
  • Reflectivity (ϱ) - the reflectance of a paste or paint film thick enough that extra thickness no longer changes the reflectance.
  • Reflectance factor (R) - the reflected radiant flux from a paste or paint film compared with a perfect reflecting diffuser under the same irradiation, once the film is optically thick.
  • Pigment volume concentration (p.v.c.) - the pigment concentration used in the white-pigment scattering procedure; the document uses 17 % for the test setup.

Who uses EN ISO 787-24?

EN ISO 787-24 is used by pigment manufacturers, paint and varnish laboratories, and quality-control teams that need to compare pigment strength or scattering performance under controlled conditions. It is also relevant to buyers and technical specifiers who need a documented method for comparing a delivered pigment with an agreed reference material.

The standard is used for product development, incoming inspection, batch comparison, supplier qualification and laboratory reporting in the pigments, extenders, coatings and related materials sectors.

What changed in EN ISO 787-24 from the previous edition?

EN ISO 787-24 replaces ISO 787-24:1985. The foreword states that the document was technically revised.

The stated changes include:

  • updated normative references;
  • updated definitions in Clause 3, aligned where needed with ISO 18451-1;
  • allowance for other tinting-strength criteria, with a reference to ISO 18314-2;
  • removal of notes on the commercial availability of white pigment paste and black pigment paste;
  • transfer of former notes in Clause 5 into the main text;
  • added table headers for the first two columns in Clause 5 tables;
  • revised carbon black and fumed silica requirements in Clause 5, including the use of ISO 18314-3 and ISO 9277;
  • allowance for measuring paste films on a moving carrier without contact;
  • allowance for other light sources for the tristimulus colorimeter;
  • addition of a bibliography.

Which standards are used with EN ISO 787-24?

StandardWhat it contributes
ISO 591-1Requirements and test methods for titanium dioxide used in the white pigment paste
ISO 787-2Determination of matter volatile at 105 °C
ISO 787-9Determination of pH value of aqueous suspensions
ISO 787-10Density by pyknometer method
ISO 787-16Visual comparison method for relative tinting strength
ISO 787-17Comparison of lightening power of white pigments
ISO 787-23Density using a centrifuge to remove entrained air
ISO 1524Fineness of grind, used for the white pigment paste
ISO 3219 (all parts)Viscosity of the alkyd resin
ISO 2114Acid value of the alkyd resin
ISO 4629 (all parts)Hydroxyl value of the alkyd resin
ISO 4652Specific surface area of carbon black by nitrogen adsorption methods
ISO 6209Solvent-extractable matter in carbon black
ISO 9277BET specific surface area of solids, used for fumed silica
ISO 15528Sampling of paints, varnishes and raw materials
ISO 18314-3Special indices, used for the blackness value MY of carbon black
ISO 18451-1General pigment terminology used in the definitions
ISO 18314-2Saunderson correction and related Kubelka-Munk calculations, cited for alternative criteria

What does the EN ISO 787-24 document contain?

EN ISO 787-24 contains the photometric principle, the preparation of the white and black pigment pastes, and the detailed grinding and film-preparation steps needed to make comparable test dispersions. It also gives the measurement conditions for spectrophotometers and tristimulus colorimeters, including the wavelength and filter choices for coloured and white pigments.

The document includes formula-based calculations for relative tinting strength and relative scattering power, plus the Kubelka-Munk and Saunderson relationships used to convert measured ϱ or R into K/S values. Annex B is the lookup table for those values, so laboratories can calculate results without reproducing the full theory each time.

Clause 5 contains tables that define the required properties of the alkyd resin, the carbon black pigment and the fumed silica used in the test pastes. Those tables matter because they control the consistency of the comparison media.

The test report clause then turns the method into a recordable laboratory result by listing the minimum reporting items and any agreed deviations.

Relations

Effective Date
08-Nov-2023
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026
Effective Date
04-Nov-2026

Buy Documents

Standard

EN ISO 787-24:2026

English language (20 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

EN ISO 787-24:2026 is a standard published by the European Committee for Standardization (CEN). Its full title is "General methods of test for pigments and extenders - Part 24: Photometric methods for determining the relative tinting strength of coloured pigments and the relative scattering power of white pigments (ISO 787-24:2026)". This standard covers: This document specifies photometric methods of test for comparing in the visible spectrum: the tinting strength of two similar coloured pigments dispersed in an alkyd resin without a drier; the scattering power of two white pigments of the same type dispersed in an alkyd resin without a drier. This document does not apply to the comparison of coloured pigments that on reduction differ greatly in colour.

This document specifies photometric methods of test for comparing in the visible spectrum: the tinting strength of two similar coloured pigments dispersed in an alkyd resin without a drier; the scattering power of two white pigments of the same type dispersed in an alkyd resin without a drier. This document does not apply to the comparison of coloured pigments that on reduction differ greatly in colour.

EN ISO 787-24:2026 is classified under the following ICS (International Classification for Standards) categories: 87.060.10 - Pigments and extenders. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 787-24:2026 has the following relationships with other standards: It is inter standard links to EN ISO 787-24:1995, ISO 787-10:1993, ISO 6209:2009, ISO 787-9:2019, ISO 18314-3:2022, ISO 3219-2:2021, ISO 3219-1:2021, ISO 18314-2:2023, ISO 591-1:2000, ISO 2114:2000, ISO 4629-2:2016, ISO 4629-3:2018, ISO 9277:2022, ISO 4652:2020, ISO 15528:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 787-24:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2026
Nadomešča:
SIST EN ISO 787-24:1997
Splošne preskusne metode za pigmente in polnila - 24. del: Fotometrijske metode
za določanje relativne barvne jakosti barvnih pigmentov in relativne moči sipanja
belih pigmentov (ISO 787-24:2026)
General methods of test for pigments and extenders - Part 24: Photometric methods for
determining the relative tinting strength of coloured pigments and the relative scattering
power of white pigments (ISO 787-24:2026)
Allgemeine Prüfverfahren für Pigmente und Füllstoffe - Teil 24: Photometrische
Verfahren zur Bestimmung der relativen Farbstärke von Buntpigmenten und des
relativen Streuvermögens von Weißpigmenten (ISO 787-24:2026)
Méthodes générales d’essai des pigments et matières de charge - Partie 24: Méthodes
photométriques pour la détermination du pouvoir colorant relatif des pigments colorés et
du pouvoir diffusant relatif des pigments blancs (ISO 787-24:2026)
Ta slovenski standard je istoveten z: EN ISO 787-24:2026
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 787-24
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2026
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 787-24:1995
English Version
General methods of test for pigments and extenders - Part
24: Photometric methods for determining the relative
tinting strength of coloured pigments and the relative
scattering power of white pigments (ISO 787-24:2026)
Méthodes générales d'essai des pigments et matières Allgemeine Prüfverfahren für Pigmente und Füllstoffe -
de charge - Partie 24: Méthodes photométriques pour Teil 24: Photometrische Verfahren zur Bestimmung
la détermination du pouvoir colorant relatif des der relativen Farbstärke von Buntpigmenten und des
pigments colorés et du pouvoir diffusant relatif des relativen Streuvermögens von Weißpigmenten (ISO
pigments blancs (ISO 787-24:2026) 787-24:2026)
This European Standard was approved by CEN on 21 September 2026.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 787-24:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 787-24:2026) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2027, and conflicting national standards shall be
withdrawn at the latest by April 2027.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 787-24:1995.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 787-24:2026 has been approved by CEN as EN ISO 787-24:2026 without any
modification.
International
Standard
ISO 787-24
Third edition
General methods of test for
2026-10
pigments and extenders —
Part 24:
Photometric methods for
determining the relative tinting
strength of coloured pigments and
the relative scattering power of
white pigments
Méthodes générales d’essai des pigments et matières de charge —
Partie 24: Méthodes photométriques pour la détermination
du pouvoir colorant relatif des pigments colorés et du pouvoir
diffusant relatif des pigments blancs
Reference number
ISO 787-24:2026(en) © ISO 2026

ISO 787-24:2026(en)
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 787-24:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
3.1 Terms related to coloured and black pigments .2
3.2 Terms related to white pigments .2
3.3 Terms related to reflectivity .3
3.4 Terms related to reflectance factor .3
4 Principle . 3
4.1 General .3
4.2 Coloured and black pigments .3
4.3 White pigments . .4
5 Materials and equipment . 4
6 Apparatus . 5
7 Sampling . 6
8 Procedure . 6
8.1 Determination of relative tinting strength .6
8.1.1 Test pigment dispersion . .6
8.1.2 Reference pigment dispersion .7
8.1.3 Preparation of test films .7
8.1.4 Measurement of ϱ or R .7
∞ ∞
8.2 Determination of relative scattering power .7
8.2.1 General .7
8.2.2 Test pigment dispersion . .7
8.2.3 Reference pigment dispersion .8
8.2.4 Preparation of test films .8
8.2.5 Measurement of ϱ or R .8
∞ ∞
9 Expression of results . 8
10 Test report . 8
Annex A (informative) Reflectivity and Kubelka-Munk analysis .10
Bibliography .11

iii
ISO 787-24:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 256, Pigments, dyestuffs and extenders, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 298,
Pigments and extenders, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 787-24:1985), which has been technically
revised.
The main changes are as follows:
— the introduction has been deleted;
— the normative references have been updated;
— in Clause 3, the definitions have been updated and, where necessary, aligned with ISO 18451-1;
— 3.1.3 “absorbance index” has been changed to “absorption index”;
— 4.1 has been added;
— in 4.2, “K ” has been replaced by “C “ as symbol for relative tinting strength;
r rel
— in 4.2 and 8.1.4, the method has been opened to other tinting strength criterion, including a reference to
ISO 18314-2;
— the characteristic “nigrometer index value” and its requirement have been changed to “blackness value
M ” for the characteristic and to “203 to 215” for the requirement, and ISO 18314-3 has been added as a
Y
test method (Clause 5, Table 2);
2 2
— the requirement for “specific surface area (BET)” has been changed to “25 m /g to 33 m /g” for carbon
black pigment (Clause 5, Table 2);
— the requirement for the pH value has been changed to “6 to 9” for carbon black pigment (Clause 5, Table 2);

iv
ISO 787-24:2026(en)
— ISO 9277 has been added as the test method for the specific surface area (BET) for fumed silica (Clause 5,
Table 3);
— in 6.3, a reference was included which described the possibility of measuring paste films on a moving
carrier without any contact;
— in 6.4, additional light sources for the tristimulus colorimeter were included;
— Annex A has been modified and subdivided into A.1 and A.2;
— Annex B has been deleted;
— a bibliography has been added.
A list of all parts in the ISO 787 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

v
International Standard ISO 787-24:2026(en)
General methods of test for pigments and extenders —
Part 24:
Photometric methods for determining the relative tinting
strength of coloured pigments and the relative scattering
power of white pigments
1 Scope
This document specifies photometric methods of test for comparing in the visible spectrum:
a) the tinting strength of two similar coloured pigments dispersed in an alkyd resin without a drier;
b) the scattering power of two white pigments of the same type dispersed in an alkyd resin without a
drier.
This document does not apply to the comparison of coloured pigments that on reduction differ greatly in
colour.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 591-1, Titanium dioxide pigments for paints — Part 1: Specifications and methods of test
ISO 787-2, General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105
°C
ISO 787-9, General methods of test for pigments and extenders — Part 9: Determination of pH value of an
aqueous suspension
ISO 787-10, General methods of test for pigments and extenders — Part 10: Determination of density —
Pyknometer method
ISO 3219 (all parts), Rheology
ISO 2114, Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value
and total acid value
ISO 4629 (all parts), Binders for paints and varnishes — Determination of hydroxyl value
ISO 4652, Rubber compounding ingredients — Carbon black — Determination of specific surface area by
nitrogen adsorption methods — Single-point procedures
ISO 6209, Rubber compounding ingredients — Carbon black — Determination of solvent-extractable material
ISO 9277, Determination of the specific surface area of solids by gas adsorption — BET method
ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling

ISO 787-24:2026(en)
ISO 18314-2, Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation,
tinting strength, depth of shade and hiding power
ISO 18314-3, Analytical colorimetry — Part 3: Special indices
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1 Terms related to coloured an
...