Abstract

This document specifies references to methods for the determination of the content of the following specific micronutrients in inorganic fertilizers:
—   the total boron content;
—   the total cobalt content;
—   the total copper and zinc content;
—   the total iron content;
—   the total manganese content;
—   total molybdenum content;
—   the water-soluble boron content;
—   the water-soluble cobalt content;
—   the water-soluble copper content;
—   the water-soluble iron content;
—   the water-soluble manganese content;
—   the water-soluble molybdenum content;
—   the water-soluble zinc content;
—   the sum of declared micronutrients in compound micronutrient fertilizers.
This document is applicable to fertilizing product blends, where the blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply.
NOTE   Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.
An overview of the references to methods for the determination of the specific micronutrients is given in Table 1.

Status
Not Published
Publication Date
10-Mar-2027

Buy Documents

FprEN 17754 is a draft European Standard from CEN for inorganic fertilizers. It specifies the methods to use for determining specific micronutrients in inorganic fertilizers, including total and water-soluble forms of boron, cobalt, copper, iron, manganese, molybdenum and zinc, plus the sum of declared micronutrients in compound micronutrient fertilizers. It is used to support measurement of compliance with the requirements linked to EU fertilising products, including certain fertilizing product blends where inorganic fertilizer is the dominant component.

What does FprEN 17754 specify?

FprEN 17754 covers the analytical route for specific micronutrients in inorganic fertilizers and in qualifying fertilizing product blends. The document does not set out a single laboratory method from start to finish - it points users to the extraction and determination standards to apply for each micronutrient and product case.

The scope includes both total and water-soluble content for the listed micronutrients, and it also covers the calculation of the sum of declared micronutrients in compound micronutrient fertilizers. For blends, the document applies when inorganic fertilizers are the highest percentage component by mass or volume, or by dry mass for liquid forms. If another component category is dominant, the European Standard for that category applies instead.

The document is organized into these main parts:

  • Clause 1 - Scope
  • Clause 2 - Normative references
  • Clause 3 - Terms and definitions
  • Clause 4 - Sampling and sample preparation
  • Clause 5 - Extraction of specific micronutrients
  • Clause 6 - Determination of specific micronutrients
  • Clause 7 - Sum of declared micronutrients
  • Annex ZA - relationship with Regulation (EU) 2019/1009

What are the key requirements of FprEN 17754?

FprEN 17754 gives a selection of required reference methods, not a single universal procedure. In practice, a laboratory first prepares the sample, then extracts the relevant fraction, then applies the correct determination method for the micronutrient and concentration range.

Scope and blend applicability

FprEN 17754 applies to inorganic fertilizers and to blends made from at least two of the listed component types, as long as inorganic fertilizers are the dominant category. If the blend has equal quantities of components, the user decides which standard to apply. This matters because the same mixed product may fall under a different standard depending on its composition.

Sampling and sample preparation

FprEN 17754 excludes sampling from the method itself. Clause 4 points users to EN 1482-2:2024 for sample preparation, and recommends EN 1482-1 and EN 1482-3 for sampling. The practical point is that the laboratory needs a representative, undamaged sample before any micronutrient result is meaningful.

Extraction of total and water-soluble micronutrients

FprEN 17754 requires EN 16964:2018 for extraction of total micronutrients using aqua regia, and EN 16962:2018 for extraction of water-soluble micronutrients, including removal of organic compounds from water extracts. This separation matters because “total” and “water-soluble” are not the same result, and users need the correct fraction for the product claim or legal requirement.

Determination methods by micronutrient

FprEN 17754 ties each micronutrient to specific determination standards in Clause 6 and Table 1:

  • Boron - EN 17042:2018 when boron is more than 10%, EN 17041:2018 when it is 10% or less; EN 16963:2018 may also be used depending on technique availability.
  • Cobalt, iron, manganese, copper and zinc - EN 16963:2018 or EN 16965:2018, depending on the technique available.
  • Molybdenum - EN 17043:2018 when molybdenum is 10% or less; EN 16963:2018 may also be used depending on technique availability.

This choice matters because the applicable method depends on the analyte and its concentration range, and the wrong method can give unusable results.

Method limitation for boron

FprEN 17754 notes that EN 17041:2018 is not suitable for fertilizers with iron concentrations more than 20 times higher than the boron concentration. That limitation is important for interference control, especially when products contain both iron and boron at very different levels.

Sum of declared micronutrients

FprEN 17754 requires the sum of declared micronutrients to be calculated from the individually determined total amounts, including suspended, complexed or chelated micronutrients and micronutrients in solution, if applicable. In practice, this is the calculation used when a product declares several micronutrients together.

What terms does FprEN 17754 define?

FprEN 17754 uses the terms and definitions from prEN 12944-1:2026 and prEN 12944-2:2026. Key terms and abbreviations in the document include:

  • Inorganic fertilizers - the product category covered by the standard and the category that can control applicability for blends.
  • Fertilizing product blends - mixtures made from at least two listed component types, such as fertilizers, liming materials, soil improvers, growing media, inhibitors and plant biostimulants.
  • Total micronutrients - the micronutrient fraction determined after aqua regia extraction in EN 16964:2018.
  • Water-soluble micronutrients - the micronutrient fraction extracted by EN 16962:2018 from water extracts.
  • ICP-AES - inductively coupled plasma-atomic emission spectrometry, used by EN 16963:2018 for several micronutrient determinations.
  • FAAS - flame atomic absorption spectrometry, used by EN 16965:2018 for cobalt, copper, iron, manganese and zinc.
  • PFC 1(C) - the product function category for inorganic fertilizers in Regulation (EU) 2019/1009.

Who uses FprEN 17754?

FprEN 17754 is used by laboratories that test fertilizers, by manufacturers that need analytical evidence for product claims, and by conformity assessment bodies checking compliance with EU fertilising product requirements. It is also relevant to quality managers and regulators working with inorganic fertilizers and fertilizing product blends.

In practice, users apply it when they need comparable results for total or water-soluble micronutrients, or when they need the declared sum of micronutrients for compound micronutrient fertilizers. That makes it a reference document for routine quality control, release testing, and compliance verification.

What changed in FprEN 17754 from the previous edition?

FprEN 17754 supersedes CEN/TS 17754:2022. The foreword states these main changes:

  • the Technical Specification has been adopted as a European Standard, with Annex ZA added
  • Clause 1, the Scope, has been updated
  • Clause 2, the Normative references, has been updated
  • the Bibliography has been updated

Which standards are used with FprEN 17754?

FprEN 17754 relies on several related standards for sample handling, terminology, extraction and measurement:

  • EN 1482-2:2024 - general sample preparation provisions
  • EN 1482-1 - recommended sampling provisions
  • EN 1482-3 - sampling of static heaps
  • prEN 12944-1:2026 - general fertilizer vocabulary
  • prEN 12944-2:2026 - fertilizer-specific vocabulary
  • EN 16962:2018 - extraction of water-soluble micronutrients and removal of organic compounds
  • EN 16963:2018 - determination of B, Co, Cu, Fe, Mn, Mo and Zn by ICP-AES
  • EN 16964:2018 - extraction of total micronutrients using aqua regia
  • EN 16965:2018 - determination of Co, Cu, Fe, Mn and Zn by FAAS
  • EN 17041:2018 - boron determination at 10% or below
  • EN 17042:2018 - boron determination above 10%
  • EN 17043:2018 - molybdenum determination at 10% or below

What does the FprEN 17754 document contain?

FprEN 17754 contains the method mapping that links each micronutrient and concentration case to the required extraction and determination standards. Table 1 gives that overview, including the thresholds for boron and molybdenum and the alternative measurement routes where more than one method can be used.

The document also includes a calculation rule in Clause 7 for the sum of declared micronutrients in compound micronutrient fertilizers. Annex ZA contains the correspondence between the European Standard and the essential requirements of Regulation (EU) 2019/1009, and Table ZA.1 shows which clauses support which regulatory requirements.

Relations

Effective Date
03-Jul-2024

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

Control Union Certifications

Global certification for agriculture and sustainability.

RVA Netherlands Verified

ECOCERT

Organic and sustainability certification.

COFRAC France Verified

FSC International

Forest Stewardship Council certification.

ASI Germany Verified

Sponsored listings

Frequently Asked Questions

FprEN 17754 is a draft published by the European Committee for Standardization (CEN). Its full title is "Inorganic fertilizers - Determination of specific micronutrients". This standard covers: This document specifies references to methods for the determination of the content of the following specific micronutrients in inorganic fertilizers: — the total boron content; — the total cobalt content; — the total copper and zinc content; — the total iron content; — the total manganese content; — total molybdenum content; — the water-soluble boron content; — the water-soluble cobalt content; — the water-soluble copper content; — the water-soluble iron content; — the water-soluble manganese content; — the water-soluble molybdenum content; — the water-soluble zinc content; — the sum of declared micronutrients in compound micronutrient fertilizers. This document is applicable to fertilizing product blends, where the blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. NOTE Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. An overview of the references to methods for the determination of the specific micronutrients is given in Table 1.

This document specifies references to methods for the determination of the content of the following specific micronutrients in inorganic fertilizers: — the total boron content; — the total cobalt content; — the total copper and zinc content; — the total iron content; — the total manganese content; — total molybdenum content; — the water-soluble boron content; — the water-soluble cobalt content; — the water-soluble copper content; — the water-soluble iron content; — the water-soluble manganese content; — the water-soluble molybdenum content; — the water-soluble zinc content; — the sum of declared micronutrients in compound micronutrient fertilizers. This document is applicable to fertilizing product blends, where the blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. NOTE Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. An overview of the references to methods for the determination of the specific micronutrients is given in Table 1.

FprEN 17754 is classified under the following ICS (International Classification for Standards) categories: 65.080 - Fertilizers. The ICS classification helps identify the subject area and facilitates finding related standards.

FprEN 17754 has the following relationships with other standards: It is inter standard links to CEN/TS 17754:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

FprEN 17754 is associated with the following European legislation: EU Directives/Regulations: 2019/1009; Standardization Mandates: M/564, M/564 Amd 1, M/564 Amd 2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

FprEN 17754 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2026
Anorganska gnojila - Določanje specifičnih mikrohranil
Inorganic fertilizers - Determination of specific micronutrients
Anorganische Düngemittel - Bestimmung spezifischer Spurennährstoffe
Engrais inorganiques - Détermination des oligo-éléments spécifiques
Ta slovenski standard je istoveten z: prEN 17754
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 17754
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2026
ICS 65.080 Will supersede CEN/TS 17754:2022
English Version
Inorganic fertilizers - Determination of specific
micronutrients
Engrais inorganiques - Détermination des oligo- Anorganische Düngemittel - Bestimmung spezifischer
éléments spécifiques Spurennährstoffe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 260.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17754:2026 E
worldwide for CEN national Members.

prEN 17754:2026 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling and sample preparation . 6
4.1 Sampling . 6
4.2 Sample preparation . 6
5 Extraction of specific micronutrients . 7
5.1 Total boron, cobalt, copper, iron, manganese, molybdenum and zinc . 7
5.2 Water-soluble forms of boron, cobalt, copper, iron, manganese, molybdenum and zinc . 7
6 Determination of specific micronutrients . 7
6.1 Boron content . 7
6.2 Cobalt, iron, manganese, copper and zinc content . 7
6.3 Molybdenum content . 7
7 Sum of declared micronutrients . 8
Annex ZA (informative) Relationship of this European Standard and the essential requirements of
Regulation (EU) 2019/1009 making available on the market of EU fertilising products
aimed to be covered . 9
Bibliography . 17

prEN 17754:2026 (E)
European foreword
This document (prEN 17754:2026) has been prepared by Technical Committee CEN/TC 260 “Fertilizers
and liming materials”, the secretariat of which is held by DIN.
This document is currently submitted to CEN Enquiry.
This document will supersede CEN/TS 17754:2022.
prEN 17754:2026 includes the following significant technical changes with respect to
CEN/TS 17758:2022:
a) the CEN Technical Specification has been adopted as a European Standard including the addition of
Annex ZA;
b) Scope (Clause 1) updated;
c) Normative references (Clause 2) updated;
d) Bibliography updated.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
prEN 17754:2026 (E)
Introduction
Regulation (EU) 2019/1009 [2] lays down the rules on the making available on the market of EU
fertilizing products and the specific safety and quality requirements for the defined product function
categories (PFCs). Inorganic fertilizers have been classified into PFC 1(C).
The specific safety and quality requirements in relation to the following specific micronutrients are
defined in this document as well as normative references of the test methods to be used in order to
measure the compliance with the related requirement in the Regulation (EU) 2019/1009 [2].

prEN 17754:2026 (E)
1 Scope
This document specifies references to methods for the determination of the content of the following
specific micronutrients in inorganic fertilizers:
— the total boron content;
— the total cobalt content;
— the total copper and zinc content;
— the total iron content;
— the total manganese content;
— total molybdenum content;
— the water-soluble boron content;
— the water-soluble cobalt content;
— the water-soluble copper content;
— the water-soluble iron content;
— the water-soluble manganese content;
— the water-soluble molybdenum content;
— the water-soluble zinc content;
— the sum of declared micronutrients in compound micronutrient fertilizers.
This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the
following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant
biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by
mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the
blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is
composed of components in equal quantity, the user decides which standard to apply. Variations in
analytical methods for fertilizing product blends can lead to differing results as some components or
matrix interactions can affect the outcome. Validation procedures have shown that developed standard
methods are robust and reliable across diverse product compositions, but possible interferences and
unexpected results when analysing fertilizing product blends are possible.
An overview of the references to methods for the determination of the specific micronutrients is given in
Table 1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1482-2:2024, Fertilizers, liming materials and inhibitors — Sampling and sample preparation — Part
2: General sample preparation provisions
prEN 17754:2026 (E)
prEN 12944-1:2026, Fertilizers, liming materials and inhibitors — Vocabulary — Part 1: General terms
prEN 12944-2:2026, Fertilizers, liming materials and inhibitors — Vocabulary — Part 2: Terms relating to
fertilizers
EN 16962:2018, Fertilizers — Extraction of water soluble micro-nutrients in fertilizers and removal of
organic compounds from fertilizer extracts
EN 16963:2018, Fertilizers — Determination of boron, cobalt, copper, iron, manganese, molybdenum and
zinc using ICP-AES
EN 16964:2018, Fertilizers — Extraction of total micro-nutrients in fertilizers using aqua regia
EN 16965:2018, Fertilizers — Determination of cobalt, copper, iron, manganese and zinc using flame
atomic absorption spectrometry (FAAS)
EN 17041:2018, Fertilizers — Determination of boron in concentrations ≤ 10 % using spectrometry with
azomethine-H
EN 17042:2018, Fertilizers — Determination of boron in concentrations > 10 % using acidimetric titration
EN 17043:2018, Fertilizers — Determination of molybdenum in concentrations ≤ 10 % using spectrometry
of a complex with ammonium thiocyanate
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 12944-1:2026 and
prEN 12944-2:2026 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Sampling and sample preparation
4.1 Sampling
Sampling is not part of the method specified in this document. Recommended sampling methods are
given in EN 1482-1 [3] and EN 1482-3 [4].
It is important that the laboratory receives a sample that is representative of both the product under
consideration and the given analysis. The sample should not have been damaged or changed during
transport or storage.
4.2 Sample preparation
Sample preparation shall be carried out in accordance with EN 1482-2:2024.
prEN 17754:2026 (E)
5 Extraction of specific micronutrients
5.1 Total boron, cobalt, copper, iron, manganese, molybdenum and zinc
For the extraction of total boron, cobalt, copper, iron, manganese, molybdenum and zinc EN 16964:2018
shall be used. EN 16964:2018 specifies a method for the extraction of total boron, cobalt, copper, iron,
manganese, molybdenum and zinc with aqua regia from inorganic fertilizers containing one or more
micronutrients.
5.2 Water-soluble forms of boron, cobalt, copper, iron, manganese, molybdenum and
zinc
For the extraction of water-soluble forms of boron, cobalt, copper, iron, manganese, molybdenum and
zinc EN 16962:2018 shall be used. EN 16962:2018 specifies a method for the extraction of water-soluble
forms of boron, cobalt, copper, iron, manganese, molybdenum and zinc from inorganic fertilizers
containing one or more micronutrients and the procedure for removal of organic compounds from the
water extracts.
6 Determination of specific micronutrients
6.1 Boron content
For the determination of the total and the water-soluble boron content in inorganic fertilizers containing
more than 10 % boron EN 17042:2018 shall be used.
For the determination of the total and the water-soluble boron content in inorganic fertilizers containing
less than or equal to 10 % boron EN 17041:2018 shall be used. The method is not suitable for fertilizers
with Fe concentrations more than twenty times higher than the concentration of boron.
Depending on availability of the technique, EN 16963:2018 may also be used. EN 16963:2018 specifies a
method for the determination of total and water-soluble boron in fertilizer extracts using inductively
coupled plasma-atomic emission spectrometry (ICP-AES).
6.2 Cobalt, iron, manganese, copper and zinc content
For the determination of the total and the water-soluble cobalt, iron, manganese, copper and zinc content
in fertilizer extracts EN 16963:2018 or EN 16965:2018 shall be used, depending on availability of the
technique
...