EN ISO 15876-5:2003
(Main)Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
ISO 15876-5:2003 specifies the characteristics of the fitness for purpose of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application.
It covers a range of service conditions (classes of application) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15876-1.
It also specifies the test parameters for the test methods referred to in the standard.
In conjunction with the other parts of ISO 15876, it is applicable to PB pipes, fittings and their joints, including joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten (PB) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15876-5:2003)
Dieser Teil der EN (155wi024) legt die Anforderungen zur Gebrauchstauglichkeit von Polybuten (PB)-Rohrleitungssystemen für die Verlegung von Warm- und Kaltwasserleitungen innerhalb und im Umfeld von Gebäuden (Hausinstallations- und Heizungssysteme) fest, für den Transport von Wasser, welches für den menschlichen Gebrauch bestimmt ist oder nicht, unter Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse.
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 5: Aptitude à l'emploi du système (ISO 15876-5:2003)
L'ISO 15876-5:2003 spécifie les caractéristiques d'aptitude à l'emploi des systèmes de canalisations en polybutène (PB) destiné à des installations d'eau chaude et froide à l'intérieur des bâtiments ainsi qu'au transport de l'eau, destinée ou non à la consommation humaine (systèmes domestiques) et aux installations de chauffage, à des pressions et des températures de service correspondant à la classe d'application.
Elle couvre une gamme de conditions de service (classes d'application) et de classes de pression de service. Elle ne s'applique pas lorsque les valeurs de température de service, de température maximale de service et de température de dysfonctionnement dépassent celles données dans l'ISO 15876-1.
Elle spécifie aussi les paramètres d'essai pour les méthodes d'essai auxquelles il est fait référence dans ce document.
Conjointement avec les autres parties de l'ISO 15876, elle s'applique aux tubes en PB, aux raccords, à leurs assemblages et aux assemblages avec des composants faits en d'autres matériaux, plastiques ou non plastiques, pouvant être utilisés avec des installations d'eau chaude et froide.
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
General Information
- Status
- Withdrawn
- Publication Date
- 30-Nov-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155/WG 16 - Systems for hot and cold water applications
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Feb-2017
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 15-Feb-2017
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 15876-5:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)". This standard covers: ISO 15876-5:2003 specifies the characteristics of the fitness for purpose of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application. It covers a range of service conditions (classes of application) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15876-1. It also specifies the test parameters for the test methods referred to in the standard. In conjunction with the other parts of ISO 15876, it is applicable to PB pipes, fittings and their joints, including joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.
ISO 15876-5:2003 specifies the characteristics of the fitness for purpose of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application. It covers a range of service conditions (classes of application) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15876-1. It also specifies the test parameters for the test methods referred to in the standard. In conjunction with the other parts of ISO 15876, it is applicable to PB pipes, fittings and their joints, including joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.
EN ISO 15876-5:2003 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15876-5:2003 has the following relationships with other standards: It is inter standard links to EN ISO 15876-5:2017, EN ISO 1167-4:2007, EN ISO 15876-1:2003, EN ISO 1167-1:2006, EN ISO 1167-2:2006, EN ISO 3501:2022, EN ISO 1167-3:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15876-5:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 15876-5:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2004
Plastics piping systems for hot and cold water installations - Polybutylene (PB) -
Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5:
Fitness for purpose of the system (ISO 15876-5:2003)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polybuten
(PB) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15876-5:2003)
Systemes de canalisations en plastique pour les installations d'eau chaude et froide -
Polybutene (PB) - Partie 5: Aptitude a l'emploi du systeme (ISO 15876-5:2003)
Ta slovenski standard je istoveten z: EN ISO 15876-5:2003
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...