EN 13146-8:2012
(Main)Railway applications - Track - Test methods for fastening systems - Part 8: In service testing
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing
This European Standard specifies a procedure for the comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects conform to prEN 13481 2:2010, prEN 13481 3:2010, prEN 13481 4:2010, prEN 13481 5:2010 and prEN 13481 7:2010.
This test applies to complete fastening assemblies.
It is only used for comparative testing of such fastening systems installed at the same time on the type of support for which they are intended.
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 8: Betriebserprobung
Dieser Teil der EN 13146legt ein Verfahren zur Vergleichsprüfung von Befestigungssystemen im Gleis fest. Das Prüfverfahren ist auf Befestigungssysteme anwendbar, die ansonsten in jeder Hinsicht der prEN 13481 2:2010, prEN 13481 3:2010, prEN 13481 4:2010, prEN 13481 5:2010 und prEN 13481 7:2010 entsprechen.
Dieses Prüfverfahren gilt für komplette Schienenbefestigungssysteme.
Es ist lediglich für die Vergleichsprüfung solcher Befestigungssysteme anzuwenden, die zur gleichen Zeit auf dem Schwellentyp, für den sie vorgesehen sind, installiert wurden.
Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 8: Essai en service
La présente partie de la Norme européenne EN 13146 décrit un mode opératoire permettant des essais comparatifs de systèmes de fixation en voie. La méthode d'essai est applicable aux systèmes de fixation répondant en tous points aux prescriptions des prEN 13481-2:2010, prEN 13481-3:2010, prEN 13481-4:2010, prEN 13481-5:2010, et prEN 13481-7:2010.
Cette méthode d’essai est appliquée à des ensembles de fixation complets.
La présente norme ne doit être utilisée que dans le cadre d'essais comparatifs des systèmes de fixation, installés à la même période sur le type de support pour lequel ils sont conçus.
Železniške naprave - Zgornji ustroj - Preskušanje pritrdilnih sistemov - 8. del: Preskusni odsek
Ta evropski standard določa postopek za primerjalno preskušanje pritrdilnih sistemov na zgornjem ustroju. Preskusni postopek se uporablja za pritrdilne sisteme, ki so na vseh drugih področjih skladni s standardi EN 13481-2:2012, EN 13481-3:2012, EN 13481-4:2012, EN 13481-5:2012 in EN 13481-7:2012. Ta preskus se uporablja za celotne pritrdilne sestave. Uporablja se samo za primerjalno preskušanje pritrdilnih sestavov, ki so hkrati nameščeni na podporo, za katero so namenjeni.
General Information
- Status
- Withdrawn
- Publication Date
- 03-Apr-2012
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 256 - Railway applications
- Drafting Committee
- CEN/TC 256/SC 1/WG 17 - Fastening systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Sep-2023
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 11-Apr-2012
- Effective Date
- 06-Jun-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 13232-5:2005+A1:2011 - Railway applications - Track - Switches and crossings - Part 5: Switches - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 13146-8:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Railway applications - Track - Test methods for fastening systems - Part 8: In service testing". This standard covers: This European Standard specifies a procedure for the comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects conform to prEN 13481 2:2010, prEN 13481 3:2010, prEN 13481 4:2010, prEN 13481 5:2010 and prEN 13481 7:2010. This test applies to complete fastening assemblies. It is only used for comparative testing of such fastening systems installed at the same time on the type of support for which they are intended.
This European Standard specifies a procedure for the comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects conform to prEN 13481 2:2010, prEN 13481 3:2010, prEN 13481 4:2010, prEN 13481 5:2010 and prEN 13481 7:2010. This test applies to complete fastening assemblies. It is only used for comparative testing of such fastening systems installed at the same time on the type of support for which they are intended.
EN 13146-8:2012 is classified under the following ICS (International Classification for Standards) categories: 93.100 - Construction of railways. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13146-8:2012 has the following relationships with other standards: It is inter standard links to EN 13146-8:2002/A1:2006, EN 13146-8:2002, EN 13146-9:2009, EN 13481-1:2012, EN 13481-8:2006, EN 13232-7:2006+A1:2011, EN ISO 30013:2011, EN ISO 8029:2010, EN 13232-6:2005+A1:2011, EN 13481-3:2012, EN 13481-5:2012, EN 13481-5:2012+A1:2017, EN 13232-5:2005+A1:2011, EN 13481-2:2012, EN 13481-4:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13146-8:2012 is associated with the following European legislation: EU Directives/Regulations: 2008/57/EC; Standardization Mandates: M/275, M/334, M/483. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13146-8:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Preskušanje pritrdilnih sistemov - 8. del: Preskusni odsekBahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 8: BetriebserprobungApplications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 8 : Essai en serviceRailway applications - Track - Test methods for fastening systems - Part 8: In service testing93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13146-8:2012SIST EN 13146-8:2012en,de01-september-2012SIST EN 13146-8:2012SLOVENSKI
STANDARDSIST EN 13146-8:2004/A1:2007SIST EN 13146-8:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13146-8
April 2012 ICS 93.100 Supersedes EN 13146-8:2002English Version
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing
Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 8: Essai en service
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 8: BetriebserprobungThis European Standard was approved by CEN on 26 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13146-8:2012: ESIST EN 13146-8:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...