prEN ISO 8339
(Main)Building and civil engineering sealants - Determination of tensile properties (Extension to break) (ISO/DIS 8339:2026)
- Abstract
ISO 8339:2005 specifies a method for the determination of the tensile properties of sealants used in joints in building construction.
- Status
- Not Published
- Publication Date
- 19-Mar-2028
- Technical Committee
- CEN/SS B02 - Structures
- Drafting Committee
- CEN/SS B02 - Structures
- Current Stage
- 4020 - Submission to enquiry - Enquiry
- Start Date
- 01-Oct-2026
- Completion Date
- 01-Oct-2026
prEN ISO 8339 is a draft standard from the European Committee for Standardization (CEN) for building and civil engineering sealants. It specifies a laboratory method for determining tensile properties, especially extension to break, for sealants used in joints in building construction. The standard is intended for testing, comparison, and reporting by laboratories, manufacturers, and others who need repeatable tensile test results.
What does prEN ISO 8339 specify?
prEN ISO 8339 specifies how to prepare sealant test specimens, condition them, extend them until rupture, and calculate the resulting tensile properties. The standard is organized into Clauses 1 to 10, covering scope, references, terms, principle, apparatus, specimen preparation, conditioning, test procedure, expression of results, and test report.
Clause 4 sets out the basic principle: the sealant is bonded between two parallel contact surfaces, extended to break, and the force/extension response is recorded. A note points to ISO 8340 for tensile properties at maintained extension.
Clause 5 describes the equipment and materials used for the test, and Clauses 6 to 10 cover preparation, conditioning, testing, calculation, and reporting. Figures 1 and 2 show the specimen arrangements for different substrate materials.
What are the key requirements of prEN ISO 8339?
prEN ISO 8339 requires a controlled specimen geometry, fixed conditioning options, and a defined test speed so that results from different labs can be compared.
- Clause 4 - principle: The sealant specimen is extended until rupture and the force/extension diagram is recorded. In practice, this means the test does not stop at a set strain level - it measures behavior through failure.
- Clause 5 - apparatus: The substrate materials are selected from mortar, anodized aluminium, or glass, with other substrates only by agreement. This matters because the substrate affects adhesion and break behavior.
- Clause 5 - machine and temperature control: The tensile test machine extends specimens at (5,5 ± 0,5) mm/min, and the method uses a refrigerated enclosure at (− 20 ± 2) °C and an oven at (70 ± 2) °C. That gives a fixed mechanical rate and temperature history for repeatable results.
- Clause 6 - specimen preparation: Sealant and substrates are brought to (23 ± 2) °C, three specimens are prepared for each substrate type and each test temperature, and manufacturer instructions for primer and multi-component mixing are followed. The procedure also requires avoiding air bubbles, pressing the sealant onto the inner surfaces, and trimming it flush.
- Clause 7 - conditioning: Method A is 28 days at (23 ± 2) °C and (50 ± 10) % relative humidity. Method B adds repeated heat-and-water cycling after Method A, then 24 h at standard room conditions before testing.
- Clause 8 - test temperatures: Testing is carried out at both (23 ± 2) °C and (− 20 ± 2) °C, with three specimens at each temperature. This gives results for both ambient and cold-condition performance.
- Clause 9 - calculation: The standard requires calculation of secant modulus at a chosen elongation and elongation at break, then arithmetic means for the three specimens. In practice, this gives a single reported stiffness value and a single reported extension value for each test condition.
- Clause 10 - test report: The report must identify the sealant, substrate, primer if used, conditioning method, individual and mean results, and the observed break type. This creates traceability for product evaluation and disputes.
What terms does prEN ISO 8339 define?
prEN ISO 8339 uses the definitions given in ISO 6927 for its terms and definitions. The key terms used in the method are:
- Sealant - the material being tested for tensile behavior in a joint.
- Substrate - the test piece material to which the sealant adheres during the test.
- Primer - a treatment applied before the sealant, when the manufacturer calls for it.
- Secant modulus - the calculated stiffness value taken at a chosen elongation from the force and the initial cross-sectional area.
- Elongation at break - the extension of the specimen at rupture, reported as a percentage.
- Adhesion break - failure at the interface between sealant and substrate.
- Cohesion break - failure within the sealant material itself.
- Multi-components sealant - a sealant mixed from more than one component, with the mix ratio reported in the test record.
Who uses prEN ISO 8339?
prEN ISO 8339 is used by sealant manufacturers, test laboratories, and technical staff who need to measure tensile performance of building and civil engineering sealants. It is also used by quality managers, specifiers, and buyers who compare products or check whether a sealant has been tested under the same conditions as other products. In practice, it supports product development, incoming quality checks, and documented performance claims for joint sealants.
What changed in prEN ISO 8339 from the previous edition?
prEN ISO 8339 replaces ISO 8339:2005 and the foreword lists the main revisions. The title was revised, normative references were updated, the extension rate was changed to (5,5 ± 0,5) mm/min, a substrate cleaning workflow was added in Clause 6, relative humidity was changed to (50 ± 10) %, arithmetic mean and precision for secant modulus and elongation at break were added, the elongation equation was changed, and the mix ratio for multi-components sealant was added to the test report.
Which standards are used with prEN ISO 8339?
prEN ISO 8339 cites three normative references that support the method:
- ISO 6927 - provides the vocabulary and definitions used in the standard.
- ISO 8340 - gives the related tensile test method at maintained extension.
- ISO 13640 - specifies the test substrates used for specimen preparation.
These references set the terminology, substrate requirements, and the related tensile test approach that frame the method in prEN ISO 8339.
What does the prEN ISO 8339 document contain?
prEN ISO 8339 contains a step-by-step test method built around specimen preparation, conditioning, and tensile testing to rupture. It includes two specimen configurations shown in Figures 1 and 2, one for mortar substrates and one for anodized aluminium or glass substrates. The document also gives calculation formulas for secant modulus and elongation at break, plus reporting requirements for individual results, means, and break type. For users, the key working parts are the apparatus list, the two conditioning methods, the two test temperatures, and the report checklist in Clause 10.
Relations
- Effective Date
- 17-Sep-2025
Get Certified
Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.

Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
prEN ISO 8339 is a draft published by the European Committee for Standardization (CEN). Its full title is "Building and civil engineering sealants - Determination of tensile properties (Extension to break) (ISO/DIS 8339:2026)". This standard covers: ISO 8339:2005 specifies a method for the determination of the tensile properties of sealants used in joints in building construction.
ISO 8339:2005 specifies a method for the determination of the tensile properties of sealants used in joints in building construction.
prEN ISO 8339 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
prEN ISO 8339 has the following relationships with other standards: It is inter standard links to EN ISO 8339:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
prEN ISO 8339 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2026
Tesnila za gradbeništvo in gradbeni inženiring - Ugotavljanje nateznih lastnosti
(raztezek do preloma) (ISO/DIS 8339:2026)
Building and civil engineering sealants - Determination of tensile properties (Extension to
break) (ISO/DIS 8339:2026)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Zugverhaltens (Dehnung bis zum
Bruch) (ISO/DIS 8339:2026)
Mastics pour le bâtiment et le génie civil - Détermination des propriétés de traction
(Allongement jusqu'à rupture) (ISO/DIS 8339:2026)
Ta slovenski standard je istoveten z: prEN ISO 8339
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 8339
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of tensile
Voting begins on:
properties (Extension to break)
2026-09-29
Mastics pour le bâtiment et le génie civil — Détermination des
Voting terminates on:
propriétés de traction (Allongement jusqu'à rupture)
2026-12-22
ICS: 91.100.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 8339:2026(en)
DRAFT
ISO/DIS 8339:2026(en)
International
Standard
ISO/DIS 8339
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of tensile
Voting begins on:
properties (Extension to break)
Mastics pour le bâtiment et le génie civil — Détermination des
Voting terminates on:
propriétés de traction (Allongement jusqu'à rupture)
ICS: 91.100.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 8339:2026(en)
ii
ISO/DIS 8339:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test specimens . 2
7 Conditioning of test specimens . 2
7.1 General .2
7.2 Method A .2
7.3 Method B .2
8 Test procedure . 3
8.1 General .3
8.2 Test procedure at (23 ± 2) °C .3
8.3 Test procedure at (− 20 ± 2) °C .3
9 Expression of results . 3
9.1 Secant modulus .3
9.2 Elongation at break .4
10 Test report . 4
iii
ISO/DIS 8339:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2.
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assess
...



