EN ISO 18541-4:2015

SLOVENSKI STANDARD
01-marec-2016
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 4. del: Preskus skladnosti (ISO 18541-4:2015)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 4: Conformance test (ISO 18541-4:2015)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartungsinformationen
(RMI) - Teil 4: Konformitätsprüfungen (ISO 18541-4:2015)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 4: Tests de conformité (ISO 18541-
4:2015)
Ta slovenski standard je istoveten z: EN ISO 18541-4:2015
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18541-4
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2015
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 4: Conformance
test (ISO 18541-4:2015)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur
informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 4:
maintenance pour l'automobile (RMI) - Partie 4: Tests Konformitätsprüfungen (ISO 18541-4:2015)
de conformité (ISO 18541-4:2015)
This European Standard was approved by CEN on 12 September 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-4:2015 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18541-4:2015) has been prepared by Technical Committee ISO/TC 22 “Road
vehicles” in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18541-4:2015 has been approved by CEN as EN ISO 18541-4:2015 without any
modification.
INTERNATIONAL ISO
STANDARD 18541-4
First edition
2015-11-01
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 4:
Conformance test
Véhicules routiers — Normalisation de l’accès aux informations
relatives à la réparation et à la maintenance pour l’automobile
(RMI) —
Partie 4: Tests de conformité
Reference number
ISO 18541-4:2015(E)
©
ISO 2015
ISO 18541-4:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 18541-4:2015(E)
Contents Page
Foreword .xiii
Introduction .xiv
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 Conformance test basic principles and clustering . 2
4.1 Basic principles for conformance test case definition . 2
4.2 Conformance test clustering . 3
4.2.1 General. 3
4.2.2 Main conformance test case clusters. 3
5 Test case structure . 7
5.1 Conformance test case — General structure . . 7
5.1.1 Overview . 7
5.1.2 Test case reference number and title [RMI-CT_.] [title] . 8
5.1.3 Test purpose . 8
5.1.4 Configuration . 8
5.1.5 Preamble (setup state) . 8
5.1.6 Test execution . 8
5.1.7 Postamble. 8
5.2 Result criteria . 8
6 CT cluster 1 — Test technical infrastructure. 9
6.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex A] Test client configuration . 9
6.1.1 Overview . 9
6.1.2 Test purpose . 9
6.1.3 Configuration . 9
6.1.4 Preamble (setup state) . 9
6.1.5 Test execution . 9
6.1.6 Postamble.10
6.2 [RMI-CT_TREQ-17] Test presentation formats for information packages .10
6.2.1 Overview .10
6.2.2 Test purpose .10
6.2.3 Configuration .10
6.2.4 Preamble (setup state) .10
6.2.5 Test execution .10
6.2.6 Postamble.10
7 CT cluster 2 — Test client’s external interfaces .10
7.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) .10
7.1.1 Overview .10
7.1.2 Test purpose .10
7.1.3 Configuration .11
7.1.4 Preamble (setup state) .11
7.1.5 Test execution .11
7.1.6 Postamble.11
7.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features.11
7.2.1 Overview .11
7.2.2 Test purpose .11
7.2.3 Configuration .12
7.2.4 Preamble (setup state) .12
7.2.5 Test execution .12
7.2.6 Postamble.12
ISO 18541-4:2015(E)
7.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .12
7.3.1 Overview .12
7.3.2 Test purpose .12
7.3.3 Configuration .12
7.3.4 Preamble (setup state) .13
7.3.5 Test execution .13
7.3.6 Postamble.13
8 CT cluster 3 — Test user authentication, authorization and administration .13
8.1 [RMI-CT_UC1.1] Test to register IO for use of the VM RMI system .13
8.1.1 Overview .13
8.1.2 Test purpose .13
8.1.3 Configuration .13
8.1.4 Preamble (setup state) .13
8.1.5 Test execution .14
8.1.6 Postamble.14
8.2 [RMI-CT_UC1.2_A] Test to register IO employee for use of the VM RMI system —
Scenario A .14
8.2.1 Overview .14
8.2.2 Test purpose .14
8.2.3 Configuration .14
8.2.4 Preamble (setup state) .15
8.2.5 Test execution .15
8.3 [RMI-CT_UC1.2_B] Test to register IO employee for use of the VM RMI system —
Scenario B .15
8.3.1 Overview .15
8.3.2 Test purpose .15
8.3.3 Configuration .15
8.3.4 Preamble (setup state) .15
8.3.5 Test execution .16
8.3.6 Postamble.16
8.4 [RMI-CT_UC1.3] Test to maintain IO status .16
8.4.1 Overview .16
8.4.2 Test purpose .16
8.4.3 Configuration .16
8.4.4 Preamble (setup state) .16
8.4.5 Test execution .17
8.4.6 Postamble.17
8.5 [RMI-CT_UC1.4] Test to maintain user status .17
8.5.1 Overview .17
8.5.2 Test purpose .17
8.5.3 Configuration .17
8.5.4 Preamble (setup state) .17
8.5.5 Test execution .17
8.5.6 Postamble.18
8.6 [RMI-CT_UC1.5] Test to de-register an IO employee .18
8.6.1 Overview .18
8.6.2 Test purpose .18
8.6.3 Configuration .18
8.6.4 Preamble (setup state) .18
8.6.5 Test execution .18
8.6.6 Postamble.19
8.7 [RMI-CT_UC1.6] Test login to VM RMI system .19
8.7.1 Overview .19
8.7.2 Test purpose .19
8.7.3 Configuration .19
8.7.4 Preamble (setup state) .19
8.7.5 Test execution .19
8.7.6 Postamble.20
iv © ISO 2015 – All rights reserved

ISO 18541-4:2015(E)
8.8 [RMI-CT_UC1.7] Test for granting access to security-related RMI .20
8.8.1 Overview .20
8.8.2 Test purpose .20
8.8.3 Configuration .20
8.8.4 Preamble (setup state) .20
8.8.5 Test execution .20
8.8.6 Postamble.21
9 CT cluster 4 — Test functional user interface implementation .21
9.1 [RMI-CT_FREQ-1] Test for RMI access mode .21
9.1.1 Overview .21
9.1.2 Test purpose .21
9.1.3 Configuration .21
9.1.4 Preamble (setup state) .21
9.1.5 Test execution .21
9.1.6 Postamble.21
9.2 [RMI-CT_FREQ-2] Test for registration and login support .21
9.2.1 Overview .21
9.2.2 Test purpose .21
9.2.3 Configuration .22
9.2.4 Preamble (setup state) .22
9.2.5 Test execution .22
9.2.6 Postamble.22
9.2.7 Result criteria .22
9.3 [RMI-CT_FREQ-3] Test for implemented use cases map .22
9.3.1 Overview .22
9.3.2 Test purpose .22
9.3.3 Configuration .22
9.3.4 Preamble (setup state) .22
9.3.5 Test execution .23
9.3.6 Postamble.23
9.4 [RMI-CT_FREQ-4] Test for download area .23
9.4.1 Overview .23
9.4.2 Test purpose .23
9.4.3 Configuration .23
9.4.4 Preamble (setup state) .23
9.4.5 Test execution .23
9.4.6 Postamble.24
9.5 [RMI-CT_FREQ-5] Test for navigational pathway .24
9.5.1 Overview .24
9.5.2 Test purpose .24
9.5.3 Configuration .24
9.5.4 Preamble (setup state) .24
9.5.5 Test execution .24
9.5.6 Postamble.25
10 CT cluster 5 — Test payment for RMI .25
10.1 [RMI-CT_UC2] Test payment for RMI .25
10.1.1 Overview .25
10.1.2 Test purpose .25
10.1.3 Configuration .25
10.1.4 Preamble (setup state) .25
10.1.5 Test execution .26
10.1.6 Postamble.26
11 CT cluster 6 —Test for vehicle identification .26
11.1 [RMI-CT_UC3.1] Test vehicle identification through use of VIN .26
11.1.1 Overview .26
11.1.2 Test purpose .26
11.1.3 Configuration .26
ISO 18541-4:2015(E)
11.1.4 Preamble (setup state) .26
11.1.5 Test execution .27
11.1.6 Postamble.27
11.2 [RMI-CT_UC3.2] Test vehicle identification via product features .27
11.2.1 Overview .27
11.2.2 Test purpose .27
11.2.3 Configuration .27
11.2.4 Preamble (setup state) .27
11.2.5 Test execution .27
11.2.6 Postamble.28
12 CT cluster 7 — Test selection methods for RMI .28
12.1 [RMI-CT_UC4.1] Test selection of information type .28
12.1.1 Overview .28
12.1.2 Test purpose .28
12.1.3 Configuration .28
12.1.4 Preamble (setup state) .28
12.1.5 Test execution .28
12.1.6 Postamble.29
12.2 [RMI-CT_UC4.2] Test search by standardized terms .29
12.2.1 Overview .29
12.2.2 Test purpose .29
12.2.3 Configuration .29
12.2.4 Preamble (setup state) .29
12.2.5 Test execution .29
12.2.6 Postamble.30
12.3 [RMI-CT_UC4.3] Test navigation using product structure .30
12.3.1 Overview .30
12.3.2 Test purpose .30
12.3.3 Configuration .30
12.3.4 Preamble (setup state) .30
12.3.5 Test execution .30
12.3.6 Postamble.31
12.4 [RMI-CT_UC4.4] Test selection by document identifier .31
12.4.1 Overview .31
12.4.2 Test purpose .31
12.4.3 Configuration .31
12.4.4 Preamble (setup state) .31
12.4.5 Test execution .31
12.4.6 Postamble.31
13 CT cluster 8 — Test retrieval of information packages .32
13.1 [RMI-CT_UC5.1.1] Test retrieval of general workshop procedures .32
13.1.1 Overview .32
13.1.2 Test purpose .32
13.1.3 Configuration .32
13.1.4 Pr
...