EN ISO 10517:2009/A1:2013
(Amendment)Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)
Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)
This International Standard specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers, hereafter referred to as “hedge trimmers”, designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades. It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This International Standard deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended (see Clause 4). This International Standard does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.
Tragbare motorbetriebene Heckenscheren - Sicherheit (ISO 10517:2009/Amd 1:2013)
Taille-haies portatifs à moteur - Sécurité (ISO 10517:2009/Amd 1:2013)
Prenosni motorni obrezovalniki žive meje - Varnost (ISO 10517:2009/Amd 1:2013)
Ta mednarodni standard določa varnostne zahteve in njihovo preverjanje za načrtovanje in izdelavo prenosnih bencinskih motornih obrezovalnikov žive meje, v nadaljnjem besedilu: »obrezovalniki žive meje«, ki so namenjeni za enega samega upravljavca za obrezovanje žive meje in grmovja z uporabo enega ali več linearnih povratnih rezil. Določa metode za odpravo ali zmanjšanje nevarnosti, ki izhajajo iz uporabe obrezovalnikov. Poleg tega določa vrsto informacij, ki jih mora predložiti proizvajalec v zvezi z varnimi delovnimi postopki. Ta mednarodni standard opisuje vsa večja tveganja, nevarne razmere in dogodke v zvezi s prenosnimi motornimi obrezovalniki žive meje, kadar se uporabljajo v skladu z njihovim namenom (glej točko 4). Ta mednarodni standard ne obravnava tišje zasnove. Ne uporablja se za obrezovalnike žive meje s prostornino motorja, večjo od 80 cm3, in obrezovalnike žive meje, izdelane pred objavo tega standarda.
General Information
- Status
- Withdrawn
- Publication Date
- 03-Sep-2013
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 144 - Tractors and machinery for agriculture and forestry
- Drafting Committee
- CEN/TC 144/WG 7 - Garden equipment
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Feb-2019
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 06-Mar-2019
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
Rainforest Alliance
International non-profit sustainability certification organization.
SCS Global Services
Global leader in environmental and sustainability certification.
DNV Business Assurance China
Accredited by CNAS for wind turbine and component certification.
Sponsored listings
Frequently Asked Questions
EN ISO 10517:2009/A1:2013 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)". This standard covers: This International Standard specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers, hereafter referred to as “hedge trimmers”, designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades. It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This International Standard deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended (see Clause 4). This International Standard does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.
This International Standard specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers, hereafter referred to as “hedge trimmers”, designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades. It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This International Standard deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended (see Clause 4). This International Standard does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.
EN ISO 10517:2009/A1:2013 is classified under the following ICS (International Classification for Standards) categories: 65.060.70 - Horticultural equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 10517:2009/A1:2013 has the following relationships with other standards: It is inter standard links to EN ISO 10517:2019, EN ISO 10517:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 10517:2009/A1:2013 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 10517:2009/A1:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
Prenosni motorni obrezovalniki žive meje - Varnost (ISO 10517:2009/Amd 1:2013)
Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)
Tragbare motorbetriebene Heckenscheren - Sicherheit (ISO 10517:2009/Amd 1:2013)
Taille-haies portatifs à moteur - Sécurité (ISO 10517:2009/Amd 1:2013)
Ta slovenski standard je istoveten z: EN ISO 10517:2009/A1:2013
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10517:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2013
ICS 65.060.70
English Version
Powered hand-held hedge trimmers - Safety (ISO
10519:2009/Amd 1:2013)
Taille-haies portatifs à moteur - Sécurité (ISO Tragbare motorbetriebene Heckenscheren - Sicherheit
10519:2009/Amd 1:2013) (ISO 10519:2009/Amd 1:2013)
This amendment A1 modifies the European Standard EN ISO 10517:2009; it was approved by CEN on 3 August 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10517:2009/A1:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 10517:2009/A1:2013) has been prepared by Technical Committee ISO/TC 23
"Tractors and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 10517:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and
conflicting national standards shall be withdrawn at the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA in EN ISO 10517:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Sloveni
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...