prEN 15001-2

prEN 15001-2 is a draft published by the European Committee for Standardization (CEN). Its full title is "Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial, commercial and non-domestic gas installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance". This standard covers: This European standard specifies detailed functional requirements for the commissioning, operation and maintenance of industrial gas installations operating above 0,5 bar and domestic or commercial gas installations above 5 bar. For non-industrial [domestic and commercial] gas installations up to 5 bar, EN 1775 applies. This European standard also applies to gas installations up to 5 bar not within the scope of EN 1775 or other European standards, as well as to mixed installations [industrial and non-industrial]. The inlet connection to the appliance is normally the inlet isolation valve but can include the pipework downstream of this valve- if this pipework is not covered by the appliance standard, then this standard applies. The requirements for design, materials, construction, inspection and testing of gas installations over 0,5 bar and domestic or commercial gas installations over 5 bar are given in part 1 (WI 00234026) of this standard. In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 °C and 1,013 mbar absolute pressure. These gases, are commonly referred to as manufactured gas, natural gas or liquid petroleum gases (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437: 1993). LPG storage tanks (including all ancillaries fitted directly to the tanks) are excluded see prEN 14570. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated.

This European standard specifies detailed functional requirements for the commissioning, operation and maintenance of industrial gas installations operating above 0,5 bar and domestic or commercial gas installations above 5 bar. For non-industrial [domestic and commercial] gas installations up to 5 bar, EN 1775 applies. This European standard also applies to gas installations up to 5 bar not within the scope of EN 1775 or other European standards, as well as to mixed installations [industrial and non-industrial]. The inlet connection to the appliance is normally the inlet isolation valve but can include the pipework downstream of this valve- if this pipework is not covered by the appliance standard, then this standard applies. The requirements for design, materials, construction, inspection and testing of gas installations over 0,5 bar and domestic or commercial gas installations over 5 bar are given in part 1 (WI 00234026) of this standard. In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 °C and 1,013 mbar absolute pressure. These gases, are commonly referred to as manufactured gas, natural gas or liquid petroleum gases (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437: 1993). LPG storage tanks (including all ancillaries fitted directly to the tanks) are excluded see prEN 14570. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated.

prEN 15001-2 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

prEN 15001-2 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.