prEN ISO 14451-3

SLOVENSKI STANDARD
01-marec-2026
Pirotehnični izdelki - Pirotehnični izdelki za vozila - 3. del: Označevanje (ISO/DIS
14451-3:2026)
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO/DIS 14451-
3:2026)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 3:
Kennzeichnung (ISO/DIS 14451-3:2026)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 3: Étiquetage
(ISO/DIS 14451-3:2026)
Ta slovenski standard je istoveten z: prEN ISO 14451-3
ICS:
43.040.99 Drugi sistemi za cestna vozila Other road vehicle systems
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 14451-3
ISO/TC 22/SC 36
Pyrotechnic articles — Pyrotechnic
Secretariat: AFNOR
articles for vehicles —
Voting begins on:
Part 3: 2026-01-12
Labelling
Voting terminates on:
2026-04-06
Articles pyrotechniques — Articles pyrotechniques pour
véhicules —
Partie 3: Étiquetage
ICS: 43.040.80; 71.100.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 14451-3:2026(en)
DRAFT
ISO/DIS 14451-3:2026(en)
International
Standard
ISO/DIS 14451-3
ISO/TC 22/SC 36
Pyrotechnic articles — Pyrotechnic
Secretariat: AFNOR
articles for vehicles —
Voting begins on:
Part 3:
2026-01-12
Labelling
Voting terminates on:
2026-04-06
Articles pyrotechniques — Articles pyrotechniques pour
véhicules —
Partie 3: Étiquetage
ICS: 43.040.80; 71.100.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 14451-3:2026(en)
ii
ISO/DIS 14451-3:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Minimum labelling requirements . 1
4.1 Conformity mark .1
4.2 Category and registration number .1
4.3 Details of manufacturer or importer .1
4.4 Name and type .2
4.5 Safety instructions .2
4.6 Labelling of small articles and semi-finished products .2
Annex ZA (informative) Relationship between this European Standard and the essential safety
requirements of Directive 2013/29/EU aimed to be covered . 3
Bibliography . 4

iii
ISO/DIS 14451-3:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of t
...