EN ISO 3691-1:2012/AC:2013
(Corrigendum)Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)
This part of ISO 3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053: a) industrial counterbalanced trucks; b) reach trucks with retractable mast or retractable fork arm carriage; c) straddle trucks; d) pallet-stacking trucks; e) high-lift platform trucks; f) trucks with elevating operator position up to 1 200 mm; g) side-loading trucks (one side only); h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; i) pallet trucks; j) bidirectional and multidirectional trucks; k) tractors with a drawbar pull up to and including 20 000 N; l) rough-terrain counterbalanced trucks; m) industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
Sicherheit von Flurförderzeugen - Sicherheitsanforderungen und Verifizierung - Teil 1: Motorkraftbetriebene Flurförderzeuge mit Ausnahme von fahrerlosen Flurförderzeugen, Staplern mit veränderlicher Reichweite und Lastentransportfahrzeugen (ISO 3691-1:2011/Cor 1:2013)
Chariots de manutention - Exigences de sécurité et vérification - Partie 1: Chariots de manutention automoteurs, autres que les chariots sans conducteurs, les chariots à portée variable et les chariots transporteurs de charges - Rectificatif technique 1 (ISO 3691-1:2011/Cor 1:2013)
Vozila za talni transport - Varnostne zahteve in preverjanje - 1. del: Samognana vozila za talni transport, razen tistih brez voznika, vozil s spremenljivim dosegom in tovornih vozičkov (ISO 3691-1:2011/Cor 1:2013)
Ta del standarda ISO 3691 določa varnostne zahteve in način za njihovo preverjanje za naslednje vrste samognanih vozil za talni transport (v nadaljnjem besedilu: vozila) iz standarda ISO 5053: a) vozila za talni transport s protiutežjo; b) vozila z roko z zložljivim stebrom ali zložljivim nosilcem vilic; c) nakladalna vozila; d) vozila za skladanje palet; e) vozila z visoko dvižno ploščadjo; f) vozila z dvižnim položajem upravljavca do 1200 mm; g) bočna nakladalna vozila (samo ena stran); h) bočna nakladalna vozila (obe strani) ter bočno-prednja nakladalna vozila; i) paletna vozila; j) dvosmerna in večsmerna vozila; k) vlačilci z vlečno silo do vključno 20.000 N; l) terenska vozila s protiutežjo; m) vozila za talni transport na elektriko, dizelsko gorivo, bencin ali LPG (utekočinjeni naftni plin).
General Information
- Status
- Withdrawn
- Publication Date
- 06-Aug-2013
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 150 - Industrial trucks - Safety
- Drafting Committee
- CEN/TC 150 - Industrial trucks - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Jul-2015
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 05-Aug-2015
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN ISO 3691-1:2012/AC:2013 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)". This standard covers: This part of ISO 3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053: a) industrial counterbalanced trucks; b) reach trucks with retractable mast or retractable fork arm carriage; c) straddle trucks; d) pallet-stacking trucks; e) high-lift platform trucks; f) trucks with elevating operator position up to 1 200 mm; g) side-loading trucks (one side only); h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; i) pallet trucks; j) bidirectional and multidirectional trucks; k) tractors with a drawbar pull up to and including 20 000 N; l) rough-terrain counterbalanced trucks; m) industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
This part of ISO 3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053: a) industrial counterbalanced trucks; b) reach trucks with retractable mast or retractable fork arm carriage; c) straddle trucks; d) pallet-stacking trucks; e) high-lift platform trucks; f) trucks with elevating operator position up to 1 200 mm; g) side-loading trucks (one side only); h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; i) pallet trucks; j) bidirectional and multidirectional trucks; k) tractors with a drawbar pull up to and including 20 000 N; l) rough-terrain counterbalanced trucks; m) industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
EN ISO 3691-1:2012/AC:2013 is classified under the following ICS (International Classification for Standards) categories: 53.060 - Industrial trucks. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 3691-1:2012/AC:2013 has the following relationships with other standards: It is inter standard links to EN ISO 3691-1:2015, EN ISO 3691-1:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 3691-1:2012/AC:2013 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/079, M/301, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 3691-1:2012/AC:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Flurförderzeugen - Sicherheitsanforderungen und Verifizierung - Teil 1: Motorkraftbetriebene Flurförderzeuge mit Ausnahme von fahrerlosen Flurförderzeugen, Staplern mit veränderlicher Reichweite und Lastentransportfahrzeugen (ISO 3691-1:2011/Cor 1:2013)Chariots de manutention - Exigences de sécurité et vérification - Partie 1: Chariots de manutention automoteurs, autres que les chariots sans conducteurs, les chariots à portée variable et les chariots transporteurs de charges - Rectificatif technique 1 (ISO 3691-1:2011/Cor 1:2013)Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN ISO 3691-1:2012/AC:2013SIST EN ISO 3691-1:2012/AC:2013en01-december-2013SIST EN ISO 3691-1:2012/AC:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 3691-1:2012/AC
August 2013
Août 2013
August 2013 ICS 53.060 English version Version Française Deutsche Fassung
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)
Chariots de manutention - Exigences de sécurité et vérification - Partie 1: Chariots de manutention automoteurs, autres que les chariots sans conducteurs, les chariots à portée variable et les chariots transporteurs de charges - Rectificatif technique 1 (ISO 3691-1:2011/Cor 1:2013) Sicherheit von Flurförderzeugen - Sicherheitsanforderungen und Verifizierung - Teil 1: Motorkraftbetriebene Flurförderzeuge mit Ausnahme von fahrerlosen Flurförderzeugen, Staplern mit veränderlicher Reichweite und Lastentransportfahrzeugen (ISO 3691-1:2011/Cor 1:2013) This corrigendum becomes effective on 7 August 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 7 août 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 7. August 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EURO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...