ASTM D7054-04(2019)
(Specification)Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
SCOPE
1.1 This specification covers generally recognized requirements for the cautionary labeling to be placed on extension poles manufactured or sold, or both, for the use with paint preparation and application tools. This specification does not address any other labeling, construction, or safety requirements.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
- Status
- Published
- Publication Date
- 30-Sep-2019
- Technical Committee
- D01 - Paint and Related Coatings, Materials, and Applications
- Drafting Committee
- D01.61 - Paint Application Tools
Relations
- Effective Date
- 01-Oct-2019
Overview
ASTM D7054-04(2019), Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America, establishes requirements for cautionary labeling on extension poles intended for use with paint preparation and application tools. Published by ASTM International, this specification aims to help prevent electrical shock injuries by ensuring clear and consistent hazard warnings on extension poles. The standard applies to poles sold or manufactured in North America and focuses solely on labeling related to electrical hazards - it does not address other safety, construction, or general labeling requirements.
Key Topics
Cautionary Labeling Requirements:
The specification details the design, placement, and content of warning labels for extension poles:- Labels must warn users of the risk of electrical shock or burns if the extension pole is used near power lines.
- The warning must be provided in English, French, and Spanish.
- Label construction must be water- and solvent-resistant, and permanently affixed to the pole.
- The warning label must cover at least 75% of the pole’s circumference and be placed 4 to 8 inches (10.16 to 20.32 cm) from the attachment end.
- The label must use specific colors, symbols, and text formatting to ensure clarity and prominence, following related ANSI standards.
Label Content:
Required warning content includes:- Signal word panel (e.g., “WARNING”) in safety orange with black text and an alert symbol.
- Pictorial panel with a lightning bolt warning symbol on a white background.
- Text panel with a critical hazard message, including minimum distance to keep from power lines.
Language and Accessibility:
- Trilingual warnings (English, French, Spanish) for North American distribution.
- Legible font choices and minimum font sizes to enhance readability.
Referenced Standards:
- ANSI Z535.1 Safety Color Code
- ANSI Z535.4 Product Safety Signs and Labels
Applications
ASTM D7054-04(2019) is primarily used by manufacturers, distributors, and suppliers of extension poles designed for painting and surface preparation, such as those used with brushes, rollers, scrapers, and similar tools. Its purpose is to prevent accidents by clearly warning end users (professional painters, DIY homeowners, construction workers, and contractors) about the dangers of using conducting extension poles near electrical power lines.
Key benefits and applications include:
- Improved user safety through standardized hazard communication.
- Compliance support for manufacturers selling extension poles in North America.
- Consistency in safety warnings across brands and products, reducing the risk of electrical incidents.
- Guidance for regulatory compliance and risk management in product design.
Related Standards
When implementing ASTM D7054-04(2019), stakeholders should also consider the following related standards:
- ANSI Z535.1: Safety Color Code, which guides color usage for safety labels.
- ANSI Z535.4: Standard for Product Safety Signs and Labels, providing best practices for label design and information hierarchy.
Other related ASTM and industry standards may include those addressing the construction and performance requirements for extension poles or general product safety labeling.
Keywords: ASTM D7054, extension pole labeling, paint applicator safety, electrical hazard warning, trilingual warning label, ANSI Z535, paint preparation tool safety, product compliance North America, extension pole standards, cautionary labeling requirements
Frequently Asked Questions
ASTM D7054-04(2019) is a technical specification published by ASTM International. Its full title is "Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America". This standard covers: SCOPE 1.1 This specification covers generally recognized requirements for the cautionary labeling to be placed on extension poles manufactured or sold, or both, for the use with paint preparation and application tools. This specification does not address any other labeling, construction, or safety requirements. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
SCOPE 1.1 This specification covers generally recognized requirements for the cautionary labeling to be placed on extension poles manufactured or sold, or both, for the use with paint preparation and application tools. This specification does not address any other labeling, construction, or safety requirements. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D7054-04(2019) is classified under the following ICS (International Classification for Standards) categories: 87.100 - Paint coating equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
ASTM D7054-04(2019) has the following relationships with other standards: It is inter standard links to ASTM D7054-04(2013). Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ASTM D7054-04(2019) is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D7054 −04 (Reapproved 2019)
Standard Specification for
Cautionary Labeling of Extension Poles For Use With Paint
Applicators Distributed In North America
This standard is issued under the fixed designation D7054; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3.1.2 label, n—refers to but is not limited to a decal or self
adhesive piece of paper, plastic or metal which contains the
1.1 This specification covers generally recognized require-
warning information.
ments for the cautionary labeling to be placed on extension
3.1.3 paint applicator tool, n—brush, roller, or other tool
poles manufactured or sold, or both, for the use with paint
used to apply, spread and smooth paint onto a surface.
preparation and application tools. This specification does not
address any other labeling, construction, or safety require-
3.1.4 paint preparation tool, n—scraper, wire brush, scrub
ments.
brush, or other tool used to prepare a surface to be painted.
1.2 The values stated in SI units are to be regarded as
4. Significance and Use
standard. The values given in parentheses after SI units are
4.1 Warning labels on extension poles will alert the end user
provided for information only and are not considered standard.
of the product to potential of serious electrical shock injury if
1.3 This standard does not purport to address all of the
the product is used too close to electrical power lines.
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
5. Requirements
priate safety, health, and environmental practices and deter-
5.1 General:
mine the applicability of regulatory limitations prior to use.
5.1.1 The warning label can be incorporated with a product
1.4 This international standard was developed in accor-
label.
dance with internationally recognized principles on standard-
5.1.2 The warning label must be constructed of a material
ization established in the Decision on Principles for the
thatiswaterandsolventresistantandbepermanentlyaffixedto
Development of International Standards, Guides and Recom-
the extension pole.
mendations issued by the World Trade Organization Technical
5.1.3 The warning and product label must cover at least
Barriers to Trade (TBT) Committee.
75 % of the circumference of the extension pole (for example,
an extension pole that is 2.54 cm (1 in.) in diameter shall have
2. Referenced Documents
2 a label that is at least 5.98 cm (2.356 in.) wide).
2.1 ANSI Standards:
5.2 Label:
ANSI Z535.1 1998 Safety Color Code
5.2.1 The warning portion of the label shall be trilingual
ANSI Z535.4 1998 Product Safety Signs and Labels
(English, French, Spanish). See Table 1 for translations.
3. Terminology
5.2.2 The warning portion of the label shall incorporate a
blackborderthatseparatesitfromanyotherinformationonthe
3.1 Definitions of Terms Specific to This Standard:
label.
3.1.1 extension pole, n—long, slender piece or pieces of
5.2.3 The warning portion of the label shall incorporate a
wood, metal, plastic, composite, or combination of materials,
vertical or horizontal three panel design containing three
having a fixed or adjustable length and a threaded tip or other
components: (1) a signal word, (2) symbol/pictorial panel, and
means of attaching a paint applicator or preparation tool to one
(3) word message (see Fig. 1 for example).
end, used to increase reach.
5.2.4 The signal word panel shall have a safety orange
backgroundwithblackletteringandcontaintheword“WARN-
This specification is under the jurisdiction of ASTM Committee D01 on Paint
ING” in uppercase boldfa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...