75.180 - Equipment for petroleum and natural gas industries
ICS 75.180 Details
Equipment for petroleum and natural gas industries
Ausrustung fur Erdol- und Erdgasindustrie
Equipement pour les industries du petrole et du gaz naturel
Oprema za industrijo nafte in zemeljskega plina
General Information
Frequently Asked Questions
ICS 75.180 is a classification code in the International Classification for Standards (ICS) system. It covers "Equipment for petroleum and natural gas industries". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1299 standards classified under ICS 75.180 (Equipment for petroleum and natural gas industries). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 75.180 - Equipment for petroleum and natural gas industries
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies requirements and gives recommendations for the qualification and design, installation, testing and integrity management for the external application of composite repair systems to corroded or damaged piping and pipelines, tanks and vessels.
- Standard107 pagesEnglish languagesale 15% off
- Standard111 pagesFrench languagesale 15% off
This document gives requirements for the design, fabrication, installation, commissioning and integrity management of workover rigs on offshore fixed platforms. This document is not applicable to workover equipment: installed on mobile or floating offshore units; intended for onshore use; coiled tubing unit or snubbing unit.
- Standard65 pagesEnglish languagesale 15% off
- Standard65 pagesFrench languagesale 15% off
This document defines fundamental definitions for enhanced oil recovery (EOR) concepts and core methodologies, specifically addressing thermal recovery, gas flooding, chemical flooding, and microbial enhanced oil recovery technologies.
- Standard5 pagesEnglish languagesale 15% off
This document provides two broad types of requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures:
those related to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them;
those related to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures.
This document covers the following environmental conditions and metocean parameters:
extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure;
long-term distributions of metocean parameters in the form of cumulative, conditional, marginal or joint statistics of metocean parameters;
normal environmental conditions that are expected to occur frequently during the design service life of the structure.
Metocean parameters specified in this document are applicable to:
the determination of actions for the design of new structures;
the determination of actions for the assessment of existing structures;
the site-specific assessment of mobile offshore units;
the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure);
the operation of the platform, where appropriate.
It is beyond the scope of this document to provide detailed instructions that can be followed to produce reliable estimates of extreme or abnormal conditions in all areas and in all cases.
- Standard340 pagesEnglish languagee-Library read for1 day
This document provides requirements for subsurface flow-control devices used in side-pocket mandrels intended for use in the worldwide petroleum and natural gas industry. This document addresses injection-pressure-operated (IPO), production-pressure-operated (PPO), pilot, orifice, tubing-retrievable, and dummy flow-control devices. It includes requirements for selecting, designing, manufacturing, quality control, testing, and preparation for the shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration requirements.
The installation and retrieval of flow-control devices is outside the scope of this document. Additionally, this document is not applicable to flow-control devices with concentric axes.
This document does not include requirements for side-pocket mandrels, running, pulling, kick-over tools, or latches. Reconditioning of used flow-control devices is outside the scope of this document.
This document supplements API Spec 19G2, 2nd edition (2020), the requirements of which are applicable with the exceptions specified in this document.
- Draft9 pagesEnglish languagee-Library read for1 day
This document specifies requirements and guidance for the installation on and removal from site of independent leg jack‑ups for use in the oil and gas industries including lower carbon energy. It addresses the assessment of: the installation operation from when the jack-up enters the defined safety zone of the host platform or the intended site to when it is elevated to the operating hull elevation above LAT and is ready for operations; the removal operation from when the jack-up is ready to jack-down to when it departs the defined safety zone. NOTE 1 Whilst this document is for independent leg jack-ups, many of the provisions can be applied to mat-supported jack-ups. When the jack-up has propulsion assist or is self-propelled, the provisions of this document related to positioning can be replaced or supplemented as appropriate. This document excludes the move of the jack-up between sites and elevated operations, which are covered respectively by IMO/Class and ISO 19905-1. NOTE 2 Whilst this document addresses the installation and removal of a jack-up at a site, RMPs normally include the move of the jack-up between sites (see example RMP in Annex E).
- Standard95 pagesEnglish languagesale 15% off
- Standard97 pagesFrench languagesale 15% off
This document specifies methodologies for:
the design, analysis and evaluation of stationkeeping systems for floating offshore structures;
the assessment of stationkeeping systems for site-specific applications of mobile offshore units and construction units.
Originally developed for floating structures used in the oil and gas industry, this document is now also used in the renewable energy sector. The extent of application of this document to floating structures used in other industries is at the discretion of the relevant standard entity and its users. For example, IEC 61400-3-2 for floating wind applies this document to determine stationkeeping system responses while incorporating its own load conditions, safety factors, and environmental return periods.
This document is applicable to the following types of stationkeeping systems, which are either covered directly in this document or through reference to other guidelines:
spread mooring systems;
single point mooring systems;
dynamic positioning systems;
thruster-assisted mooring systems.
This document is not applicable to:
stationkeeping systems which do not have redundancy against failure of any single component, e.g., single anchor leg moorings (SALMs);
stationkeeping systems which use any means other than mooring lines or thrusters such as tower soft yoke systems, or tension leg platforms (TLPs) that use tendons.
The requirements for this document address spread mooring systems and single point mooring systems with mooring lines composed of steel chain, steel wire or synthetic fibre rope.
This document is applicable to all aspects of the life cycle of mooring systems. It includes requirements relating to the selection of mooring components, mooring system configuration and performance, components design, installation, post-installation survey, and as-installed assessments as needed for mooring integrity management.
For mooring systems deployed in ice-prone environments, additional requirements in ISO 19906 apply.
- Standard202 pagesEnglish languagee-Library read for1 day
This document provides requirements for subsurface flow-control devices used in side-pocket mandrels intended for use in the worldwide petroleum and natural gas industry. This document addresses injection-pressure-operated (IPO), production-pressure-operated (PPO), pilot, orifice, tubing-retrievable, and dummy flow-control devices. It includes requirements for selecting, designing, manufacturing, quality control, testing, and preparation for the shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration requirements. The installation and retrieval of flow-control devices is outside the scope of this document. Additionally, this document is not applicable to flow-control devices with concentric axes. This document does not include requirements for side-pocket mandrels, running, pulling, kick-over tools, or latches. Reconditioning of used flow-control devices is outside the scope of this document. This document supplements API Spec 19G2, 2nd edition (2020), the requirements of which are applicable with the exceptions specified in this document.
- Standard4 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document provides two broad types of requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures:
those related to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them;
those related to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures.
This document covers the following environmental conditions and metocean parameters:
extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure;
long-term distributions of metocean parameters in the form of cumulative, conditional, marginal or joint statistics of metocean parameters;
normal environmental conditions that are expected to occur frequently during the design service life of the structure.
Metocean parameters specified in this document are applicable to:
the determination of actions for the design of new structures;
the determination of actions for the assessment of existing structures;
the site-specific assessment of mobile offshore units;
the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure);
the operation of the platform, where appropriate.
It is beyond the scope of this document to provide detailed instructions that can be followed to produce reliable estimates of extreme or abnormal conditions in all areas and in all cases.
- Standard340 pagesEnglish languagee-Library read for1 day
This document contains requirements for seismic design and assessment of offshore structures.
This document includes recommendations for the effects of seismic events on floating structures.
This document addresses specifically the design and assessment of offshore structures subjected to earthquake-induced ground motions. It also covers briefly other geologically induced hazards such as liquefaction, slope instability, fault surface displacement, tsunamis, mud volcanoes and shock waves.
This document provides requirements for site-specific probabilistic seismic hazard analysis for offshore structures in high seismic areas and for offshore structures with high consequence levels.
- Standard106 pagesEnglish languagee-Library read for1 day
This document provides two broad types of requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures: those related to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them; those related to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures. This document covers the following environmental conditions and metocean parameters: extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure; long-term distributions of metocean parameters in the form of cumulative, conditional, marginal or joint statistics of metocean parameters; normal environmental conditions that are expected to occur frequently during the design service life of the structure. Metocean parameters specified in this document are applicable to: the determination of actions for the design of new structures; the determination of actions for the assessment of existing structures; the site-specific assessment of mobile offshore units; the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure); the operation of the platform, where appropriate. It is beyond the scope of this document to provide detailed instructions that can be followed to produce reliable estimates of extreme or abnormal conditions in all areas and in all cases.
- Standard332 pagesEnglish languagesale 15% off
- Standard353 pagesFrench languagesale 15% off
This document specifies methodologies for:
the design, analysis and evaluation of stationkeeping systems for floating offshore structures;
the assessment of stationkeeping systems for site-specific applications of mobile offshore units and construction units.
Originally developed for floating structures used in the oil and gas industry, this document is now also used in the renewable energy sector. The extent of application of this document to floating structures used in other industries is at the discretion of the relevant standard entity and its users. For example, IEC 61400-3-2 for floating wind applies this document to determine stationkeeping system responses while incorporating its own load conditions, safety factors, and environmental return periods.
This document is applicable to the following types of stationkeeping systems, which are either covered directly in this document or through reference to other guidelines:
spread mooring systems;
single point mooring systems;
dynamic positioning systems;
thruster-assisted mooring systems.
This document is not applicable to:
stationkeeping systems which do not have redundancy against failure of any single component, e.g., single anchor leg moorings (SALMs);
stationkeeping systems which use any means other than mooring lines or thrusters such as tower soft yoke systems, or tension leg platforms (TLPs) that use tendons.
The requirements for this document address spread mooring systems and single point mooring systems with mooring lines composed of steel chain, steel wire or synthetic fibre rope.
This document is applicable to all aspects of the life cycle of mooring systems. It includes requirements relating to the selection of mooring components, mooring system configuration and performance, components design, installation, post-installation survey, and as-installed assessments as needed for mooring integrity management.
For mooring systems deployed in ice-prone environments, additional requirements in ISO 19906 apply.
- Standard202 pagesEnglish languagee-Library read for1 day
This document contains requirements for seismic design and assessment of offshore structures.
This document includes recommendations for the effects of seismic events on floating structures.
This document addresses specifically the design and assessment of offshore structures subjected to earthquake-induced ground motions. It also covers briefly other geologically induced hazards such as liquefaction, slope instability, fault surface displacement, tsunamis, mud volcanoes and shock waves.
This document provides requirements for site-specific probabilistic seismic hazard analysis for offshore structures in high seismic areas and for offshore structures with high consequence levels.
- Standard106 pagesEnglish languagee-Library read for1 day
This document specifies the methodology for applying precision estimates of a test method derived from the processes specified in ISO 4259-1. In particular, it specifies the procedures for setting the property specification limits based upon test method precision where the property is determined using a specific test method, and determines the specification conformance status when there are conflicting results between supplier and receiver. Other applications of this test method precision are briefly described in principle without the associated procedures.
The procedures in this document have been designed specifically for petroleum and petroleum-related products, which are normally homogeneous. However, the procedures described in this document can also be applied to other types of homogeneous products.
This document is not applicable to non-homogenous products.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies the methodology for the design, planning, and execution of an interlaboratory study (ILS) and calculation of precision estimates of a test method specified by the study. In particular:
it defines the relevant statistical terms,
it specifies the procedures to be adopted in the planning and execution of an ILS to determine the precision of a test method, and
it specifies the method of calculating the precision from the results of such a study.
The procedures in this document have been designed specifically for petroleum and petroleum related products, which are normally considered as homogeneous. However, the procedures described in this document can also be applied to other types of homogeneous products.
- Standard84 pagesEnglish languagee-Library read for1 day
- Amendment9 pagesEnglish languagee-Library read for1 day
This document specifies methodologies for: the design, analysis and evaluation of stationkeeping systems for floating offshore structures; the assessment of stationkeeping systems for site-specific applications of mobile offshore units and construction units. Originally developed for floating structures used in the oil and gas industry, this document is now also used in the renewable energy sector. The extent of application of this document to floating structures used in other industries is at the discretion of the relevant standard entity and its users. For example, IEC 61400-3-2 for floating wind applies this document to determine stationkeeping system responses while incorporating its own load conditions, safety factors, and environmental return periods. This document is applicable to the following types of stationkeeping systems, which are either covered directly in this document or through reference to other guidelines: spread mooring systems; single point mooring systems; dynamic positioning systems; thruster-assisted mooring systems. This document is not applicable to: stationkeeping systems which do not have redundancy against failure of any single component, e.g., single anchor leg moorings (SALMs); stationkeeping systems which use any means other than mooring lines or thrusters such as tower soft yoke systems, or tension leg platforms (TLPs) that use tendons. The requirements for this document address spread mooring systems and single point mooring systems with mooring lines composed of steel chain, steel wire or synthetic fibre rope. This document is applicable to all aspects of the life cycle of mooring systems. It includes requirements relating to the selection of mooring components, mooring system configuration and performance, components design, installation, post-installation survey, and as-installed assessments as needed for mooring integrity management. For mooring systems deployed in ice-prone environments, additional requirements in ISO 19906 apply.
- Standard191 pagesEnglish languagesale 15% off
- Standard204 pagesFrench languagesale 15% off
This document contains requirements for seismic design and assessment of offshore structures. This document includes recommendations for the effects of seismic events on floating structures. This document addresses specifically the design and assessment of offshore structures subjected to earthquake-induced ground motions. It also covers briefly other geologically induced hazards such as liquefaction, slope instability, fault surface displacement, tsunamis, mud volcanoes and shock waves. This document provides requirements for site-specific probabilistic seismic hazard analysis for offshore structures in high seismic areas and for offshore structures with high consequence levels.
- Standard97 pagesEnglish languagesale 15% off
- Draft111 pagesFrench languagesale 15% off
This document provides general principles, requirements and recommendations for the assessment of the stability of thermoset materials that include short fibre filled or particle filled resins and exclude continuous fibre reinforced composites for service in equipment used in oil and gas exploration and production environments. These procedures can be adapted for application within low-carbon energy environments. This document also provides guidance for quality assurance. This document addresses the resistance of thermosets to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with chemical treatment. Interaction with sunlight and ionizing radiation are excluded from the scope of this document. This document is not necessarily applicable to equipment used in refining or downstream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers. Applications for short-term exposure include pump-down plugs, bridge plug components, line wiper plugs, balls, setting tools and fracking tools. Applications for long-term exposure include bearings and washers. This document excludes tubular products, tanks and similar items produced from continuous fibre reinforced materials. Blistering by rapid gas decompression is not included in the scope of this document. This document applies to the assessment of the stability of thermoset materials in simulated hydrocarbon production conditions to aid the selection of materials for equipment designed and constructed using conventional design criteria. Designs utilizing other criteria are excluded from the scope of this document.
- Standard37 pagesEnglish languagesale 15% off
- Standard39 pagesFrench languagesale 15% off
This document specifies requirements and guidance for production assurance and reliability management as applicable to the assets and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. It covers the assets and associated activities for upstream, midstream, downstream and petrochemical business categories. It focuses on the production assurance of oil and gas with respect to production and associated activities and covers the analysis of reliability and maintenance of the equipment. This includes a variety of associated systems and equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention.
The document also supports production assurance and reliability management for lower carbon energy assets and associated operations, e.g. carbon capture and storage (CCS), hydrogen, ammonia, and wind energy. It describes the processes, activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology.
This document defines 12 processes, of which seven are denoted as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and while they are outside the scope of this document, information is provided as to how they relate to production assurance and reliability management. The relationship of the core production assurance processes with these interacting processes, however, is within the scope of this document as the flow of information to and from these latter processes is required to ensure that production assurance requirements are fulfilled.
The document specifies how to establish and execute a production assurance programme (PAP) and a reliability management programme (RMP).
This document lists processes and activities that can be initiated to add value for the stakeholder (e.g. operator), where the selected process can depend on their business strategy and application area.
This document is intended for the following users and associated activities by their personnel:
Operators: Production assurance and reliability management activities. Related activities include project management and control, technology development, technology qualification, concept and system design, risk management (including HSE), integrity management, and maintenance management.
Contractors: Activities by the main contractor for engineering, procurement, construction, drilling, installation, operation, maintenance services, etc.
Vendors: Activities by manufacturer or supplier related to equipment design and quality management, technology development and qualification.
Authorities: Activities by regulatory bodies to ensure HSE, resource utilization and economic efficiency in operations.
Consultants: Consultancy services aimed at supporting production assurance and reliability management.
Universities: Activities associated with educating industry professionals, as well as conducting fundamental or applied research projects, when related to production assurance, reliability management, and technology development. This includes improvement of the methods and frameworks described herein.
Research institutions: Research activities related to production assurance, reliability management, and technology development. This includes equipment qualification testing and advanced engineering assessments using the methods and frameworks described herein.
- Standard112 pagesEnglish languagee-Library read for1 day
This document specifies requirements and guidance for production assurance and reliability management as applicable to the assets and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. It covers the assets and associated activities for upstream, midstream, downstream and petrochemical business categories. It focuses on the production assurance of oil and gas with respect to production and associated activities and covers the analysis of reliability and maintenance of the equipment. This includes a variety of associated systems and equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention. The document also supports production assurance and reliability management for lower carbon energy assets and associated operations, e.g. carbon capture and storage (CCS), hydrogen, ammonia, and wind energy. It describes the processes, activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This document defines 12 processes, of which seven are denoted as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and while they are outside the scope of this document, information is provided as to how they relate to production assurance and reliability management. The relationship of the core production assurance processes with these interacting processes, however, is within the scope of this document as the flow of information to and from these latter processes is required to ensure that production assurance requirements are fulfilled. The document specifies how to establish and execute a production assurance programme (PAP) and a reliability management programme (RMP). This document lists processes and activities that can be initiated to add value for the stakeholder (e.g. operator), where the selected process can depend on their business strategy and application area. This document is intended for the following users and associated activities by their personnel: Operators: Production assurance and reliability management activities. Related activities include project management and control, technology development, technology qualification, concept and system design, risk management (including HSE), integrity management, and maintenance management. Contractors: Activities by the main contractor for engineering, procurement, construction, drilling, installation, operation, maintenance services, etc. Vendors: Activities by manufacturer or supplier related to equipment design and quality management, technology development and qualification. Authorities: Activities by regulatory bodies to ensure HSE, resource utilization and economic efficiency in operations. Consultants: Consultancy services aimed at supporting production assurance and reliability management. Universities: Activities associated with educating industry professionals, as well as conducting fundamental or applied research projects, when related to production assurance, reliability management, and technology development. This includes improvement of the methods and frameworks described herein. Research institutions: Research activities related to production assurance, reliability management, and technology development. This includes equipment qualification testing and advanced engineering assessments using the methods and frameworks described herein.
- Standard104 pagesEnglish languagesale 15% off
- Standard110 pagesFrench languagesale 15% off
- Amendment9 pagesEnglish languagee-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies functional requirements for the design, construction, testing, commissioning/decommissioning, operation, maintenance and, where appropriate, calibration, together with suitable documented provisions for all new gas measuring systems and any major changes of existing systems.
This document also specifies accuracy classes of measuring systems and thresholds applicable to these classes. Demonstration of compliance is achieved through the selection, installation and operation of appropriate measurement instruments, together with suitable documented provisions for calculations. Examples of demonstration of compliance are provided for each accuracy class; however, they are not prescriptive solutions.
This document is applicable for gases of the 2nd family as classified in EN 437. It is also applicable for treated non-conventional combustible gases complying with EN 437 and for which a detailed technical evaluation of the functional requirements (such as injected biomethane) is performed ensuring there are no other constituents or properties of the gases that can affect the metrological and physical integrity of the measuring systems. This version mentions technical topics to consider when hydrogen and natural gas / hydrogen blends flow through the measuring systems. Blends with a hydrogen content between 20mol% and 98 mol% are not considered by this standard. This document applies to hydrogen with a purity as specified in CEN/TS 17977 for rededicated natural gas systems.
This document can also be used as a guideline for measuring systems for other gases e.g. gaseous CO2 for CCUS.
This document does not apply to for raw or sour gases.
This document does not apply to for gas measurement in CNG filling stations.
This document gives guidelines when designing, installing and operating gas meters with additional functionalities (smart gas meters).
Communication protocols and interfaces for gas meters and remote reading of gas meters are outside the scope of this document and are covered by the appropriate parts of the EN 13757 series. which provide a number of protocols for meter communications. Supervisory control and data acquisition protocols (SCADA) are also not covered by this document.
Unless otherwise specified all pressures used in this document are gauge pressures.
For associated pressure regulating systems the requirements of EN 12186 and/or EN 12279 apply.
For requirements on design, housing, lay-out, materials for components, construction, ventilation, venting and overall safety of gas measuring systems within the scope of this document, the EN 15001 series, EN 12186, EN 12279 and/or EN 1775 apply additionally, where relevant.
- Standard109 pagesEnglish languagee-Library read for1 day
The purpose of this document is to provide a uniform standard for monorail beams and padeyes when these structures are designed and constructed in offshore projects.
This document specifies the design and material requirements for mechanical handling including monorail beams and padeyes during operations of offshore facilities. This document specifies the standard shapes and dimensions of monorail beams and padeyes and provides material requirements for these bulk materials.
This document is applicable to the structures of monorail beams and padeyes for topside systems for fixed or floating offshore projects.
- Standard46 pagesEnglish languagee-Library read for1 day
This document provides the design, construction and test requirement for the structures of monorail beams and pad eyes intended for material handling of the both onshore and offshore oil and gas projects.
This document is based on major international standards to comply with requirements of shelf regulations of UK, US, Norway and Australia. Overall the requirements outlined in this document should meet most of the specified regulatory requirements. Exemptions where requirements in common standards are not met in this document are clearly stated.The standard shapes, dimensions and material grades are defined in this document.
- Standard46 pagesEnglish languagee-Library read for1 day
This document establishes the form of door schedules for offshore projects and provides definitions of listed items for architecture door schedules. It covers architectural doors applied to topsides and living quarters for fixed or floating offshore oil and gas projects.
- Standard37 pagesEnglish languagesale 15% off
- Standard39 pagesFrench languagesale 15% off
This document specifies functional requirements for the design, construction, testing, commissioning/decommissioning, operation, maintenance and, where appropriate, calibration, together with suitable documented provisions for all new gas measuring systems and any major changes of existing systems.
This document also specifies accuracy classes of measuring systems and thresholds applicable to these classes. Demonstration of compliance is achieved through the selection, installation and operation of appropriate measurement instruments, together with suitable documented provisions for calculations. Examples of demonstration of compliance are provided for each accuracy class; however, they are not prescriptive solutions.
This document is applicable for gases of the 2nd family as classified in EN 437. It is also applicable for treated non-conventional combustible gases complying with EN 437 and for which a detailed technical evaluation of the functional requirements (such as injected biomethane) is performed ensuring there are no other constituents or properties of the gases that can affect the metrological and physical integrity of the measuring systems. This version mentions technical topics to consider when hydrogen and natural gas / hydrogen blends flow through the measuring systems. Blends with a hydrogen content between 20mol% and 98 mol% are not considered by this standard. This document applies to hydrogen with a purity as specified in CEN/TS 17977 for rededicated natural gas systems.
This document can also be used as a guideline for measuring systems for other gases e.g. gaseous CO2 for CCUS.
This document does not apply to for raw or sour gases.
This document does not apply to for gas measurement in CNG filling stations.
This document gives guidelines when designing, installing and operating gas meters with additional functionalities (smart gas meters).
Communication protocols and interfaces for gas meters and remote reading of gas meters are outside the scope of this document and are covered by the appropriate parts of the EN 13757 series. which provide a number of protocols for meter communications. Supervisory control and data acquisition protocols (SCADA) are also not covered by this document.
Unless otherwise specified all pressures used in this document are gauge pressures.
For associated pressure regulating systems the requirements of EN 12186 and/or EN 12279 apply.
For requirements on design, housing, lay-out, materials for components, construction, ventilation, venting and overall safety of gas measuring systems within the scope of this document, the EN 15001 series, EN 12186, EN 12279 and/or EN 1775 apply additionally, where relevant.
- Standard109 pagesEnglish languagee-Library read for1 day
This document provides guidance to relevant product standards, for compatibility assessment and qualification of materials for equipment used in commercial, industrial installations including gas burners, gas burning appliances and fuel gas infrastructures that are:
— fed by admixture of natural gas and hydrogen (blending) or pure hydrogen;
— operated at pressure greater than 10 bar (1 MPa) and up to 100 bar (10 MPa);
—operated within a temperature range of −20° C to +60 °C;
NOTE 1 Temperature range outside of −20° to +60°C can be considered after risk assessment by the manufacturer, in compliance with relevant product standard and the requirements specified in this document.
Except for critical equipment, where hydrogen requirements and material compatibility are defined by relevant specific, national and international product standard, according to CEN/TR 17924 and CEN/TR 17797, no specific requirements are necessary, as detailed in this document (see also Figure 1), under the following conditions:
— for a homogeneous mixture of natural gas and hydrogen with a hydrogen content not exceeding 10 % by volume, at operating pressures up to 100 bar (10 MPa); or
— for operating pressures up to 10 bar (1 MPa) with a hydrogen content up to 100 % by volume.
— Equipment is classified as critical when it’s subjected to fatigue or specific mechanical stress due to specific operating conditions and applications (i.e. compression and pumping station, specific industrial installations, fuel tanks for vehicles, …).
This document represents minimum requirements and does not restrict the use of better procedures or materials.
The following items are detailed in this document:
— metallic materials;
— non-metallic materials;
— validation tests.
- Technical specification23 pagesEnglish languagee-Library read for1 day
This document provides requirements and guidance for quantifying liquefied natural gas (LNG) as a marine fuel on board LNG bunkering ships. It is applicable to the measurement of LNG from any source, e.g. gas from conventional reservoirs, shale gas, coalbed methane, at the time of: — ship to ship (STS) transfer to LNG-fuelled ships, — STS transfer between LNG bunkering ships, and — transfer to or from shore tanks or other facilities, irrespective of the type of tanks. This document is also applicable to the quantification of biomethane and synthetic methane from fossil fuels or renewable sources.
- Standard37 pagesEnglish languagesale 15% off
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
PSL-1, which is the basis of this document;
PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe. This document contains provisions relating to marking of tubing and casing after threading. This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.
- Standard130 pagesEnglish languagee-Library read for1 day
This document specifies the calculation procedure for converting the volume of liquefied petroleum gas (LPG) and liquefied natural gas (LNG) under the conditions at the time of measurement to the equivalent volume of liquid or vapour at the standard condition (i.e. 15 °C and 101,325 kPa absolute), or to the equivalent mass or energy (calorific content). This document applies to the quantities of refrigerated hydrocarbon liquids that are stored in or transferred to or from tanks and measured under static storage conditions. This document does not cover the calculation of pressurized gases.
- Standard19 pagesEnglish languagesale 15% off
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
PSL-1, which is the basis of this document;
PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series or NACE MR0175.
This document contains no provisions relating to the connection of individual lengths of pipe. Demonstration of conformance to ISO 15156-3:2020 or NACE MR0175-2021 of material affected by end sizing, connection manufacture or welding operations is outside the scope of this document.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
- Standard130 pagesEnglish languagee-Library read for1 day
This document provides guidance to relevant product standards, for compatibility assessment and qualification of materials for equipment used in commercial, industrial installations including gas burners, gas burning appliances and fuel gas infrastructures that are:
— fed by admixture of natural gas and hydrogen (blending) or pure hydrogen;
— operated at pressure greater than 10 bar (1 MPa) and up to 100 bar (10 MPa);
—operated within a temperature range of −20° C to +60 °C;
NOTE 1 Temperature range outside of −20° to +60°C can be considered after risk assessment by the manufacturer, in compliance with relevant product standard and the requirements specified in this document.
Except for critical equipment, where hydrogen requirements and material compatibility are defined by relevant specific, national and international product standard, according to CEN/TR 17924 and CEN/TR 17797, no specific requirements are necessary, as detailed in this document (see also Figure 1), under the following conditions:
— for a homogeneous mixture of natural gas and hydrogen with a hydrogen content not exceeding 10 % by volume, at operating pressures up to 100 bar (10 MPa); or
— for operating pressures up to 10 bar (1 MPa) with a hydrogen content up to 100 % by volume.
— Equipment is classified as critical when it’s subjected to fatigue or specific mechanical stress due to specific operating conditions and applications (i.e. compression and pumping station, specific industrial installations, fuel tanks for vehicles, …).
Figure 1 — Operating conditions
This document represents minimum requirements and does not restrict the use of better procedures or materials.
The following items are detailed in this document:
— metallic materials;
— non-metallic materials;
— validation tests.
- Technical specification23 pagesEnglish languagee-Library read for1 day
This document specifies a method for the calibration of spherical tanks with a radius greater than 1 m by means of external measurements using an electro-optical distance-ranging instrument (EODR). It also specifies the subsequent calculation and the compilation of tank capacity tables. This document applies to spherical tanks built above ground, that are non-insulated, single-shell and with a radial variation up to 1 %. The method specified in this document can also apply to spherical tanks built above the deck when the carrying ship is in the dock. This document does not apply to the calibration of spheroidal tanks.
- Standard25 pagesEnglish languagesale 15% off
This document specifies the criteria and minimum requirements for selecting internal coatings (often referred to as linings) for pressurized service within process vessels. The document provides the following: — key factors influencing coating selection; — generic composition of test liquids which can be used as references when evaluating supporting testing evidence for coatings; — principal test methods to be used as evidence of performance when selecting suitable coatings; — supporting evidence to be used in evaluating coatings that is relevant to the potential end use. This document covers types of coatings that are generally available, with properties that are known and documented. It also covers other materials to be evaluated and qualified for use. This document is applicable to process vessels coated at the new construction phase. It can be applied only where the coating is applied directly to the substrate. This document does not cover requirements related to metallic coatings nor weld overlay materials.
- Standard35 pagesEnglish languagesale 15% off
- Standard36 pagesFrench languagesale 15% off
- Amendment14 pagesEnglish languagee-Library read for1 day
This document specifies the minimum requirements to quantify boil-off gas (BOG) consumed on liquefied natural gas (LNG) carriers for their own functions, in particular for power generation and during cargo transfer operations. This document provides requirements for the metering of BOG and the subsequent calorific value calculations, which can be taken into account when the energy transferred during cargo transfer is determined. This document also gives performance requirements and calibration of the elements included in the BOG measurement system. This document, with some modifications, can also be applied to the measurement of BOG consumed by LNG carriers at sea.
- Standard13 pagesEnglish languagesale 15% off
This document specifies requirements for downhole thermoplastics lined tubing (TLT) used in the oil and gas industries, including configuration, materials, manufacturing, inspection and testing, documentation, marking, packaging, transportation, storage and use. This document is applicable to downhole thermoplastics lined tubing (TLT) used in contact with media related to oil and gas exploration and production (which involves multiphase flow, as well as water injection). This document is suitable for thermoplastics including but not limited to polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), ultra-high molecular weight polyethylene (PE-UHMW), crosslinked polyethylene (PE-X), polypropylene (PP), unplasticized polyamide (PA-U), polyketone (PK), polyphenylene sulfide (PPS), polyvinylidene fluoride (PVDF), and polyetheretherketone (PEEK) which meet the requirements of relevant design specifications, standards or regulations.
- Technical specification36 pagesEnglish languagesale 15% off
- Amendment14 pagesEnglish languagee-Library read for1 day
- Standard8 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. The environmental risks associated with an LNG release are not addressed in this document.
This document is applicable both to export and import terminals but can be applicable to other facilities such as satellite and peak shaving plants.
This document is applicable to all facilities inside the perimeter of the terminal and all hazardous materials including LNG and associated products: LPG, pressurized natural gas, odorizers, and other flammable or hazardous products handled within the terminal.
The navigation risks and LNG tanker intrinsic operation risks are recognised, but they are not in the scope of this document. Hazards arising from interfaces between port and facility and ship are addressed and requirements are normally given by port authorities. It is assumed that LNG carriers are designed according to the IGC code, and that LNG fuelled vessels receiving bunker fuel are designed according to IGF code.
Border between port operation and LNG facility is when the ship/shore link (SSL) is established.
This document is not intended to specify acceptable levels of risk; however, examples of tolerable levels of risk are referenced.
See IEC 31010 and ISO 17776 with regard to general risk assessment methods, while this document focuses on the specific needs scenarios and practices within the LNG industry.
- Technical specification66 pagesEnglish languagee-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. The environmental risks associated with an LNG release are not addressed in this document.
This document is applicable both to export and import terminals but can be applicable to other facilities such as satellite and peak shaving plants.
This document is applicable to all facilities inside the perimeter of the terminal and all hazardous materials including LNG and associated products: LPG, pressurized natural gas, odorizers, and other flammable or hazardous products handled within the terminal.
The navigation risks and LNG tanker intrinsic operation risks are recognised, but they are not in the scope of this document. Hazards arising from interfaces between port and facility and ship are addressed and requirements are normally given by port authorities. It is assumed that LNG carriers are designed according to the IGC code, and that LNG fuelled vessels receiving bunker fuel are designed according to IGF code.
Border between port operation and LNG facility is when the ship/shore link (SSL) is established.
This document is not intended to specify acceptable levels of risk; however, examples of tolerable levels of risk are referenced.
See IEC 31010 and ISO 17776 with regard to general risk assessment methods, while this document focuses on the specific needs scenarios and practices within the LNG industry.
- Technical specification66 pagesEnglish languagee-Library read for1 day
This document provides a uniform reference for tertiary structure items when a tertiary structure is designed and constructed in offshore oil and gas projects. This document covers topside systems for fixed or floating offshore projects not covered by class requirements. This document can be applicable for hull systems and onshore projects when there is consent from relevant stakeholders. This document does not provide class rules from classification societies. This document provides requirements on dimensions of the items but does not include requirements on clearances with other structures. The following tertiary outfitting designs for equipment items are covered in this document: — handrails; — safety gate; — stairs; — spiral stairs; — vertical ladder; — grating; — access hole (manhole); — connection method.
- Standard194 pagesEnglish languagesale 15% off
- Standard198 pagesFrench languagesale 15% off
This document contains provisions for geotechnical engineering design that are applicable to a broad range of offshore structures, rather than to a particular structure type. This document outlines methods developed for the design of shallow foundations with an embedded length (L) to diameter (D) ratio L/D < 0,5, intermediate foundations, which typically have 0,5 ≤ L/D ≤ 10 (see Clause 7), and long and flexible pile foundations with L/D > 10 (see Clauses 8 and 9).
This document also provides guidance on soil-structure interaction aspects for flowlines, risers and conductors (see Clause 10) and anchors for floating facilities (see Clause 11). This document contains brief guidance on site and soil characterization, and identification of hazards (see Clause 6).
This document can be applied for foundation design for offshore structures used in the lower carbon energy industry.
- Standard237 pagesEnglish languagee-Library read for1 day
This document provides general requirements and recommendations for the development and operation of subsea production/injection systems, from the concept development phase to decommissioning and abandonment.
Flexible pipe standards form part of the API 17-series of documents (see 4.3.3); however, this document (technically equivalent to API RP 17A 6th edition) does not generally cover flowlines/pipelines or production/injection risers (associated with flowlines/pipelines). These components form part of a complete subsea production system (SPS), as shown in Figure 1.
- Standard43 pagesEnglish languagee-Library read for1 day
This document contains provisions for geotechnical engineering design that are applicable to a broad range of offshore structures, rather than to a particular structure type. This document outlines methods developed for the design of shallow foundations with an embedded length (L) to diameter (D) ratio L/D < 0,5, intermediate foundations, which typically have 0,5 ≤ L/D ≤ 10 (see Clause 7), and long and flexible pile foundations with L/D > 10 (see Clauses 8 and 9).
This document also provides guidance on soil-structure interaction aspects for flowlines, risers and conductors (see Clause 10) and anchors for floating facilities (see Clause 11). This document contains brief guidance on site and soil characterization, and identification of hazards (see Clause 6).
This document can be applied for foundation design for offshore structures used in the lower carbon energy industry.
- Standard237 pagesEnglish languagee-Library read for1 day
This document specifies the design requirements for architectural supports, in terms of their shape and dimensions, material, strength, etc. This document covers architectural supports of topside and living-quarter regions for fixed or floating offshore oil and gas platforms including lower carbon energy.
- Standard21 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document contains provisions for geotechnical engineering design that are applicable to a broad range of offshore structures, rather than to a particular structure type. This document outlines methods developed for the design of shallow foundations with an embedded length (L) to diameter (D) ratio L/D L/D ≤ 10 (see Clause 7), and long and flexible pile foundations with L/D > 10 (see Clauses 8 and 9). This document also provides guidance on soil-structure interaction aspects for flowlines, risers and conductors (see Clause 10) and anchors for floating facilities (see Clause 11). This document contains brief guidance on site and soil characterization, and identification of hazards (see Clause 6). This document can be applied for foundation design for offshore structures used in the lower carbon energy industry.
- Standard226 pagesEnglish languagesale 15% off
- Standard233 pagesFrench languagesale 15% off
- Standard233 pagesFrench languagesale 15% off