2007-01-4081 - Pravilnik o opremi in načinu uporabe opreme občinskih redarjev

ISO 105-D01:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to drycleaning using perchloroethylene solvent.
This method is neither suitable for the evaluation of the durability of textile finishes, nor is it intended for use in evaluating the resistance of colours to spot and stain removal procedures used by the drycleaner.
This test covers colour fastness to drycleaning only; commercial drycleaning  practice normally involves other operations, such as water spotting, solvent spotting and steam pressing, etc., for which other standard test methods are available if the full response to drycleaning of a textile is to be assessed.
The presence of absorbed water in drycleaning solvent, or the presence of a detergent and water in a drycleaning solvent, are known to alter the colour fastness properties of some materials. This test requires the assessment of the material under test in a dry state, using solvent alone, within containers that do not contain water.
Fastness to drycleaning, without further qualification in ISO 105-D01:2010, means fastness to drycleaning in perchloroethylene. However, if required, other solvents that are used for textile cleaning can be used.

ISO 105-C06:2010 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles using a reference detergent. Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
The colour loss and staining resulting from desorption and/or abrasive action in one single (S) test closely approximates to one commercial or domestic laundering. The results of one multiple (M) test may in some cases be approximated by the results of up to five domestic or commercial launderings at temperatures not exceeding 70 °C. The M tests are more severe than the S tests because of an increase in mechanical action.
These methods do not reflect the effect of optical brighteners present in commercial washing products.
These methods are designed for the detergents and bleach systems given. Other detergents and bleach systems may require different conditions and levels of ingredients.

This test method is mainly applicable to natural and regenrated cellulose materials. A specimen of the textile is agitated in a solution of sodium or lithium hypochlorite.

Tests are given for hot pressing when the textile is dry, when it is wet, and when it is damp. The end-use of the textile usually determines which test should be made. A dry specimen (dry pressing) or a dry specimen covered with a wet cotton adjacent fabric (damp pressing) or a wet specimen covered with a wet cotton adjacent fabric (wet pressing) are pressed with a heating device at a specified temperature and pressure for a specified time.

This standard specifies requirements for clothing capable of signalling the user's presence visually, intended to provide conspicuity of the user in hazardous situations under any light condition by day and under illumination by vehicle headlights in the dark.  Performance requirements are included for colour and retroreflection as well as for the minimum areas and for the disposition of the materials. Test methods ensure that a minimum level of protection is maintained when the garments are subjected to care procedures.