2022-01-0296 - Pravilnik o delih in opremi vozil

This document specifies minimum requirements for the design and performance of power assisted stretchers used in road ambulances for the treatment and transportation of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

This European Standard specifies requirements for the design, testing, performance and equipping of road ambulances used for the transport, monitoring, treatment and care of patients. It contains requirements for the patient’s compartment in terms of the working environment, ergonomic design and the safety of the crew and patients.This European Standard does not cover the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.
This European Standard is applicable to road ambulances capable of transporting at least one person on a stretcher and excludes the transportation of hospital beds.
This standard also specifies requirements for ambulances intended to carry transport incubator systems.
The European Standard covers the specific requirements of each type of road ambulance which are
designated according to the patient condition e.g. patient transport road ambulance types A1, A2, B and C.
This European Standard gives general requirements for medical devices carried in road ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions.

This document specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles.
It details health and safety requirements on:
—   the selection of materials;
—   components and appliances;
—   design considerations;
—   tightness testing of installations;
—   the contents of the user's handbook.
This document only covers installations supplied with 3rd family gases (LPG).
It does not cover:
—   water connections or electrical power supplies to the appliance(s);
—   portable appliances, incorporating their own LPG supply;
—   the installation of LPG appliances to be used for commercial purposes;
—   LPG installations on boats;
—   LPG supply equipment and LPG appliances separate from and external to the body of the vehicle.
This document covers LPG tanks fulfilling the requirements of the Pressure Equipment Directive (2014/68/EU).
Attention is drawn to the Pressure Equipment Directive (2014/68/EU) for any parts of the installation operating above 0,5 bar.

This European Standard specifies requirements for the design, testing, performance and equipping of road ambulances used for the transport, monitoring, treatment and care of patients. It contains requirements for the patient’s compartment in terms of the working environment, ergonomic design and the safety of the crew and patients.This European Standard does not cover the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.
This European Standard is applicable to road ambulances capable of transporting at least one person on a stretcher and excludes the transportation of hospital beds.
This standard also specifies requirements for ambulances intended to carry transport incubator systems.
The European Standard covers the specific requirements of each type of road ambulance which are
designated according to the patient condition e.g. patient transport road ambulance types A1, A2, B and C.
This European Standard gives general requirements for medical devices carried in road ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions.

This document specifies the minimum safety ventilation requirements for leisure accommodation vehicles.
It provides alternative methods of calculation or testing of safety ventilation.

This European Standard specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This document specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Specific requirements of this document apply to motor caravans where the overall length multiplied by the overall width does not exceed 13,5 m2 plan area.
Requirements applicable to road safety are not included in the scope of this document.
This document is applicable exclusively to motor caravans as defined in EN 13878.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system.
It does not apply to commercial trailers; nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

This European Standard defines minimum requirements for the design and performance of stretchers and other patient handling equipment used in road ambulances for the handling and carrying of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and luminaires).
The main intended use of fixed signs is for the instruction and guidance of road users on public and private land.
Matters not covered by this standard:
a)   sign gantry and cantilever structures;
b)   signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics;
c)   variable message signs;
d)   signs used for temporary purposes;
e)   foundations;
f)   tests for extremely low temperatures.

This document specifies safety requirements for installing oil-fired heating systems in caravans and caravan holiday homes. It applies to liquid fuel heating systems using oil fuels as defined in EN 13878.
NOTE   Safety ventilation requirements for leisure accommodation vehicles are specified in EN 721.

This edition cancels and replaces the ISO Recommendation R 612-1967. Defines terms relating to dimensions of motor vehicles and towed vehicles but does not deal with methods of measurement, the units used in reporting the results, or the accuracy required, or the order of magnitude of the dimensions defined.

Specifies the requirements for the location and marking of the vehicle identification number (VIN) on motor vehicles, trailers, motorcycles and mopeds as defined in ISO 3833. The VIN is a structured combination of characters assigned to a vehicle by the manufacturer for identification purposes. This second edition cancels and replaces the first edition (1977).

Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV. Has the status of a basic safety publication in accordance with IEC Guide 104.