F15.39 - Bean Bag Chairs

ABSTRACT
This specification covers the minimum performance requirements and associated durability test for bean bag chairs (with and without zippers) for the intension of reducing possible choking and suffocation hazards associated with their use. The two types of bean bag chairs covered here are those designed to be refilled, and those designed with permanent closures and not intended to be refilled.
SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs and bean bag chair covers.  
1.2 This specification covers bean bag chairs and bean bag chair covers with and without zippers.  
1.3 This specification covers two types of bean bag chairs:  
1.3.1 Those designed to be refilled, and  
1.3.2 Those designed with permanent closures and not intended to be refilled.  
1.4 This specification does not cover products that include shredded foam or fiber-fill used as an internal filler material.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers the minimum performance requirements and associated durability test for bean bag chairs (with and without zippers) for the intension of reducing possible choking and suffocation hazards associated with their use. The two types of bean bag chairs covered here are those designed to be refilled, and those designed with permanent closures and not intended to be refilled.
SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs and bean bag covers.  
1.2 This specification covers bean bag chairs and bean bag covers with and without zippers.  
1.3 This specification covers two types of bean bag chairs:  
1.3.1 Those designed to be refilled, and  
1.3.2 Those designed with permanent closures and not intended to be refilled.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers the minimum performance requirements and associated durability test for bean bag chairs (with and without zippers) for the intension of reducing possible choking and suffocation hazards associated with their use. The two types of bean bag chairs covered here are those designed to be refilled, and those designed with permanent closures and not intended to be refilled.
SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs.  
1.2 This specification covers bean bag chairs with and without zippers.  
1.3 This specification covers two types of bean bag chairs:  
1.3.1 Those designed to be refilled, and  
1.3.2 Those designed with permanent closures and not intended to be refilled.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification covers the minimum performance requirements and associated durability test for bean bag chairs (with and without zippers) for the intension of reducing possible choking and suffocation hazards associated with their use. The two types of bean bag chairs covered here are those designed to be refilled, and those designed with permanent closures and not intended to be refilled.
SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs.
1.2 This specification covers bean bag chairs with and without zippers.
1.3 This specification covers two types of bean bag chairs:
1.3.1 Those designed to be refilled, and
1.3.2 Those designed with permanent closures and not intended to be refilled.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification covers the minimum performance requirements and associated durability test for bean bag chairs (with and without zippers) for the intension of reducing possible choking and suffocation hazards associated with their use. The two types of bean bag chairs covered here are those designed to be refilled, and those designed with permanent closures and not intended to be refilled.
SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs.
1.2 This specification covers bean bag chairs with and without zippers.
1.3 This specification covers two types of bean bag chairs:
1.3.1 Those designed to be refilled, and
1.3.2 Those designed with permanent closures and not intended to be refilled.
1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This specification is intended to reduce choking and suffocation hazard(s) associated with bean bag chairs.
1.2 This specification covers bean bag chairs with and without zippers.
1.3 This specification covers two types of bean bag chairs:
1.3.1 Those designed to be refilled, and
1.3.2 Those designed with permanent closures and not intended to be refilled.
1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.