E58.05 - Industrial Processes

SIGNIFICANCE AND USE
3.1 This guide is intended for use by individuals who investigate incidents involving carbon monoxide poisoning. If this guide is followed, the cause for the carbon monoxide poisoning incident may be determined, and corrective action may be identified to prevent future incidents.  
3.2 When attempting to identify the source of carbon monoxide, consider that it is produced at some level in virtually every fuel-burning engine, boiler, furnace, burner, stove or fire. All carbon-based fuels (for example, gasoline, diesel fuel, natural gas, propane, coal, wood, paper products, plastics) produce carbon monoxide as a result of incomplete combustion. When there is insufficient air for complete combustion, carbon monoxide can become a major product of combustion. In properly-operating fuel-fired combustion appliances (for example, residential furnaces and water heaters), the level of carbon monoxide produced may be as little as a hundred parts per million or less (that is, 0.01 %). In those same appliances, malfunctions can potentially result in significantly higher carbon monoxide concentrations (10 000 ppm to 100 000 ppm, or higher). Properly-operating internal combustion engines may also generate carbon monoxide concentrations on the order of 10 000 ppm or higher.  
3.3 Be aware of the effects of carbon monoxide on humans and pets. Carbon monoxide acts as a central nervous system depressant. With increasing dosage (combination of concentration and time of exposure) symptoms may include headache, dizziness, weakness, upset stomach, vomiting, chest pain, and confusion, and may lead to death. Carbon monoxide is especially hazardous because it is colorless and odorless, providing no warning of its presence. When inhaled, carbon monoxide binds with hemoglobin in the blood, creating carboxyhemoglobin (COHb). The affinity of carbon monoxide for hemoglobin is approximately 200 times greater than the affinity of oxygen for hemoglobin. Therefore, the blood can accumulate dangerou...
SCOPE
1.1 This guide covers collection and preservation of information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.  
1.2 This guide is not intended to address the medical effects of carbon monoxide exposure.  
1.3 This guide is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires, or contamination in closed air systems or confined spaces. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921.  
1.4 This guide is not intended for an investigation where equipment is removed from the incident site and conducted in a more controlled setting.  
1.5 This guide is intended to be used by a wide range of investigators, including first responders, appliance technicians and engineers.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
3.1 This guide is intended for use by individuals who investigate incidents involving carbon monoxide poisoning. If this guide is followed, the cause for the carbon monoxide poisoning incident may be determined, and corrective action may be identified to prevent future incidents.  
3.2 When attempting to identify the source of carbon monoxide, consider that it is produced at some level in virtually every fuel-burning engine, boiler, furnace, burner, stove or fire. All carbon-based fuels (for example, gasoline, diesel fuel, natural gas, propane, coal, wood, paper products, plastics) produce carbon monoxide as a result of incomplete combustion. When there is insufficient air for complete combustion, carbon monoxide can become a major product of combustion. In properly-operating combustion equipment, the level of carbon monoxide produced may be as little as a hundred parts per million or less (that is, 0.01 %). However, combustion with insufficient air can produce carbon monoxide concentrations of 10 000 ppm to 100 000 ppm (that is, 1 to 10 %) or higher.  
3.3 Be aware of the effects of carbon monoxide on humans and pets. Carbon monoxide acts as a central nervous system depressant. With increasing concentration or time of exposure, or both, carbon monoxide will cause people to feel sleepy or sick, lose consciousness, and die. Carbon monoxide is especially hazardous because it is colorless and odorless, providing no warning of its presence. When inhaled, carbon monoxide binds with hemoglobin in the blood, creating carboxyhemoglobin (COHb). The affinity of carbon monoxide for hemoglobin is approximately 200 times greater than the affinity of oxygen for hemoglobin. Therefore, the blood can accumulate dangerous levels of COHb, depriving the body of oxygen.  
3.4 Since there is the potential for investigators to become victims of elevated carbon monoxide levels themselves, extreme care should be taken to assure the safety of investigators and anyone else at risk of conti...
SCOPE
1.1 This guide covers collection and preservation of information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.  
1.2 This guide is not intended to address the medical effects of carbon monoxide exposure.  
1.3 This guide is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires, or contamination in closed air systems or confined spaces. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921.  
1.4 This guide is not intended for an investigation where equipment is removed from the incident site and conducted in a more controlled setting.  
1.5 This guide is intended to be used by a wide range of investigators, including first responders, appliance technicians and engineers.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
3.1 Carbon monoxide poisoning is responsible for approximately 300 deaths annually in the United States, (excluding fire deaths) and carbon monoxide poisoning causes thousands of individuals to seek medical attention.  
3.2 This practice is intended for use by individuals who investigate incidents involving carbon monoxide poisoning. If this procedure is followed, the cause for the carbon monoxide poisoning incident may be determined, and steps can be taken to prevent future incidents.
SCOPE
1.1 This practice covers guidelines for collecting and preserving information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.  
1.2 This practice is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires, or contamination in closed air systems. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921, Guide for Fire and Explosion Investigations .  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
Carbon monoxide poisoning is responsible for approximately 300 deaths annually in the U.S., (excluding fire deaths) and carbon monoxide poisoning causes thousands of individuals to seek medical attention.
This practice is intended for use by individuals who investigate incidents involving carbon monoxide poisoning. If this procedure is followed, the cause for the carbon monoxide poisoning incident may be determined, and steps can be taken to prevent future incidents.
SCOPE
1.1 This practice covers guidelines for collecting and preserving information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.
1.2 This practice is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921, Guide for Fire and Explosion Investigations.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice covers guidelines for collecting and preserving information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.
1.2 This practice is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921, Guide for Fire and Explosion Investigations.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.