iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13411-5:2004

(Main)

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

This European Standard specifies the minimum requirements for the safe behaviour of terminations associated with U-bolt wire rope grips manufactured from ferrous materials for use as intended by the manufacturer of the U bolt grip.
Suitable uses include suspending static loads and single use lifting operations which have been assesseed by a competent person taking into account appropriate safety factors, frequency and duration of use.
This standard does not cover U-bolt wire rope grips as the primary securing devices on mine hoists, crane hoists or eye terminations for slings for general lifting service.
Examples of grips together with fitting instructions are given in informative annexes A and B.
The hazards covered by this standard are identified in clause 4.

Endverbindungen für Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-förmigem klemmbügel

Der vorliegende Teil dieser Europäischen Norm legt Mindestanforderungen für Drahtseil-klemmen für Seil-Endverbindungen von Stahldrahtseilen nach EN 12385-1, EN 12385-4 und EN 12385-5 fest. Baumusterprüfungen sind festgelegt. Konstruktion und Größen für eine Ausführung von Seilklemmen sind als Beispiele im informativen Anhang A angegeben. Angaben über die Montage von Seilklemmen sind im informativen Anhang B angegeben. Anhang C enthält eine Bibliographie.

Terminaisons pour câbles en acier - Sécurité - Partie 5 : Serre-câbles a étrier en U

La présente Norme européenne spécifie les prescriptions minimales pour les terminaisons des serre-câbles à étrier en U fabriqués à partir de matériaux ferreux et pour le comportement sûr des terminaisons à �il fixées aux serre-câbles à étrier en U, destinés à l'utilisation prévue par le fabricant du serre-câble.
Parmi les utilisations adaptées figurent la suspension de charges statiques et les opérations de levage ponctuelles qui ont été évaluées par une personne compétente en tenant compte des facteurs de sécurité appropriés.
Les serre-câbles à étrier en U ne sont pas adaptés à l'utilisation avec les câbles monotorons.
La présente norme ne couvre pas les serre-câbles utilisés comme dispositif principal de retenue sur les monte-charge de mines, les appareils de levage pour grues ou les terminaisons à �il pour élingues d'usage courant.
Des exemples de serre-câbles avec les instructions de montage sont donnés dans les Annexes informatives A et B.
Les phénomènes dangereux couverts par la présente norme sont identifiés à l'Article 4.

Zaključki jeklenih žičnih vrvi – Varnost – 5. del: Vrvne prižemke oblike U (žabice)

General Information

Status
Withdrawn
Publication Date
31-May-2004
Withdrawal Date
03-Nov-2008
ICS
53.020.30 - Accessories for lifting equipment
77.140.99 - Other iron and steel products
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Nov-2008
Due Date
26-Nov-2008
Completion Date
04-Nov-2008
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
EN 13411-5:2003 - Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

Relations

Replaced By
SIST EN 13411-5:2004+A1:2008 - Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
Effective Date
01-Dec-2008
Consolidated By
SIST EN 13411-5:2004+A1:2008 - Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
Effective Date
18-Jan-2023

Buy Standard

EN 13411-5:2004EN 13411-5:2004
PreviousNext
Standard
EN 13411-5:2004
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Endverbindungen für Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-förmigem klemmbügelTerminaisons pour câbles en acier - Sécurité - Partie 5 : Serre-câbles a étrier en UTerminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips77.140.99Drugi železni in jekleni izdelkiOther iron and steel products53.020.30Pribor za dvigalno opremoAccessories for lifting equipmentICS:Ta slovenski standard je istoveten z:EN 13411-5:2003SIST EN 13411-5:2004en01-junij-2004SIST EN 13411-5:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13411-5May 2003ICS 21.060.70; 53.020.30English versionTerminations for steel wire ropes - Safety - Part 5: U-bolt wirerope gripsTerminaisons pour câbles en acier - Sécurité - Partie 5:Serre-câbles pour terminaisons à oeil de câbles en acierEndverbindungen für Drahtseile aus Stahldraht - Sicherheit- Teil 5: Drahtseilklemmen mit U-förmigem klemmbügelThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13411-5:2003 ESIST EN 13411-5:2004

Specification for construction and sizes for one design of grip - 1.9Annex B (informative)
Specification for construction and sizes for one design of grip – 2.13Annex ZA (informative)
Relationship of this document with EU Directives.18Bibliography.19SIST EN 13411-5:2004

Safety of machinery – Basic concepts, general principles for design – Part 2: Technical principlesand specificationsEN 1050:1996, Safety of machinery – Principles for risk assessment.EN 1562, Founding – Malleable cast ironsEN 12385-1:2002,
Steel wire ropes – Safety – Part 1: General requirements.EN 12385-2:2003, Steel wire ropes – Safety – Part 2: Definitions, designation and classification.EN 20898-2, Mechanical properties of fasteners — Part 2: Nuts with specified proof load values – Coarse thread(ISO 898-2:1992)EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws andstuds (ISO 898-1:1999)EN ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO4759-1:2000).SIST EN 13411-5:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13411-3:2023(Main)
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN 13411-3:2022

This document deals with the requirements for the ferrule-securing of eyes and endless loops.
It also deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops.
This document applies to the ferrule-securing of eye terminations formed either by a Flemish eye or turn-back eye and covers ferrules made of non-alloy carbon steel and aluminium.
This document applies to slings and assemblies using steel wire ropes for general lifting applications up to and including 60 mm diameter conforming to EN 12385-4, lift ropes conforming to EN 12385-5 and spiral strand ropes conforming to EN 12385-10.
Type testing of ferrule-secured systems and manufacturing quality control requirements are also specified.
This document deals with all significant hazards, hazardous situations, and events relevant to this particular steel wire rope termination when used as intended and under conditions of use which are foreseeable by the manufacturer.
This document applies to terminations of steel wire ropes with ferrules and ferrule-securing which are manufactured after the date of this publication.
NOTE   One design of ferrule-secured turn-back eye termination using an oval aluminium ferule which satisfies the requirements of this document when securing ropes having rope grades up to and including 1960 is given for information in Annex A.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-4:2022(Main)
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-4:2021

This document specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2021; EN 12385-6:2004;
EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008.
The document is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination efficiency factor KT = 1,0).
NOTE Rope terminations made by socketing in accordance with this document can be used for determining the breaking force of wire ropes in accordance with EN 12385-1:2002+A1:2008, Annex A.
Socketing by the methods and materials described in this standard are for use within the temperature limits given in normative Annex E.
This document deals with all significant hazards, hazardous situations and events relevant to metal and resin socket terminations, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-9:2021(Main)
Terminations for steel wire ropes - Safety - Part 9: Solid thimbles
EN 13411-9:2021

This document specifies the minimum requirements for solid thimbles made of steel or cast iron for terminations of stranded steel wire ropes.
This document is applicable to ferrule-secured terminations with solid thimbles in combination with ferrules (see EN 13411-3), that have an efficiency factor KT of at least 0,9, and to spliced terminations with solid thimbles (see EN 13411-2), that have an efficiency factor KT of at least 0,8, which are used as accessories for steel wire ropes, such as slings or wire rope assemblies, having a lifting, lowering or load-bearing effect in hoisting equipment.
Examples of designs of solid thimbles which meet the requirements of this standard are given in informative Annexes B and C.
Round thimbles (thimble with rotational symmetry around the bore) are not subject to this document.
This document is applicable to ferrule-secured terminations that are manufactured after the date of publication of this document.
Hazards that are dealt with in this document are listed in Clause 4.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-7:2021(Main)
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
EN 13411-7:2021

This document specifies the minimum requirements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts.
This document covers those symmetric wedge sockets intended for use at temperatures between −20 °C and 100 °C.
This document only covers those symmetric wedge sockets that have welded socket bodies. An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A.
The informative Annex B gives the recommendations for the safe use and inspection of symmetric wedge socket according to Annex A.
This document deals with all significant hazards, hazardous situations and events relevant to symmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
The hazards covered by this document are identified in Clause 4.
This document applies to symmetric wedge sockets, which are manufactured after the date of its publication.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-8:2012(Main)
Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging
EN 13411-8:2011

This European Standard specifies the minimum requirements for swage terminals and the securing of such terminals by a swaging process to carbon steel rope conforming to EN 12385-4 and EN 12385-5, spiral strand rope conforming to EN 12385-10 and stainless steel stranded rope.
This European Standard is not applicable to spiral rope incorporating full lock wires - see EN 12385-10 -, nor ropes with coverings and /or fillings (see 3.6.3 of EN 12385-2:2002+A1:2008).
This European Standard is applicable to swaged terminations that have a terminal efficiency factor, KT, of at least 0,9 and are used as part of a wire rope accessory such as a sling, or wire rope assembly that performs a raising, lowering, hauling or supporting function on lifting machinery.
This European Standard is applicable to terminals of the following types that are made of carbon or stainless steel:
-   open swage socket;
-   closed swage socket;
-   swage terminal with thread;
-   swage terminal end stop.
This European Standard deals with all significant hazards, hazardous situations and events relevant to swaged terminations, when used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
This European Standard applies to swaged terminations which are manufactured after the date of its publication.
This European Standard is not applicable to swaged terminations used for anchoring ropes to winch drums.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-5:2004+A1:2008(Main)
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
EN 13411-5:2003+A1:2008

This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and associated EFTA Regulations.
Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claimed to comply consistently achieve the required level of quality.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-6:2004+A1:2008(Main)
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 13411-6:2004+A1:2008

This European Standard specifies the minimum requirements, for asymmetrical wedge socket terminations for stranded steel wire ropes.
Examples of the construction and sizes of two separate designs of asymmetric wedge sockets are given in informative annexes A and B.
The informative annex C gives recommendations for safe use and inspection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to asymmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This standard applies to terminations of steel wire ropes with asymmetrical wedge sockets which are manufactured after the date of its publication.
This standard does not cover rope fatigue.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-2:2001+A1:2008(Main)
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
EN 13411-2:2001+A1:2008

This standard specifies minimum requirements for the splicing of eye terminations for six or eight strand steel wire ropes of up to 60 mm diameter complying with prEN 12385-4 used for slings to ensure that the spliced eye is strong enough to withstand a force of at least 80 % of the minimum breaking load of the rope.
Other hazards covered by this standard are identified in clause 4. Resistance to fatigue loading is not considered to be a significant hazard for slings and is not covered by this standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-1:2003+A1:2008(Main)
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
EN 13411-1:2002+A1:2008

This European Standard specifies the minimum requirements for non welded general purpose steel thimbles produced from plate having dimensions in accordance with Figure 1. The thimbles are intended to be used in slings made with six or eight strand steel wire ropes from 8 mm to 60 mm diameter complying with EN 12385-4.
Reeving thimbles and solid thimbles are not covered by this standard.
The hazards covered by this standard are identified in clause 4.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13411-3:2023(Main)
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN 13411-3:2022

This document deals with the requirements for the ferrule-securing of eyes and endless loops.
It also deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops.
This document applies to the ferrule-securing of eye terminations formed either by a Flemish eye or turn-back eye and covers ferrules made of non-alloy carbon steel and aluminium.
This document applies to slings and assemblies using steel wire ropes for general lifting applications up to and including 60 mm diameter conforming to EN 12385-4, lift ropes conforming to EN 12385-5 and spiral strand ropes conforming to EN 12385-10.
Type testing of ferrule-secured systems and manufacturing quality control requirements are also specified.
This document deals with all significant hazards, hazardous situations, and events relevant to this particular steel wire rope termination when used as intended and under conditions of use which are foreseeable by the manufacturer.
This document applies to terminations of steel wire ropes with ferrules and ferrule-securing which are manufactured after the date of this publication.
NOTE   One design of ferrule-secured turn-back eye termination using an oval aluminium ferule which satisfies the requirements of this document when securing ropes having rope grades up to and including 1960 is given for information in Annex A.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day