oSIST prEN ISO 16484-2:2016

SLOVENSKI STANDARD
01-julij-2016
Avtomatizacija stavb in sistemi za regulacijo - 2. del: Strojna oprema (ISO/DIS
16484-2)
Building automation and control systems (BACS) - Part 2: Hardware (ISO/DIS 16484-2)
Systeme der Gebäudeautomation (GA) - Teil 2: Hardware (ISO/DIS 16484-2)
Ta slovenski standard je istoveten z: prEN ISO 16484-2 rev
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 16484-2
ISO/TC 205 Secretariat: ANSI
Voting begins on: Voting terminates on:
2016-06-23 2016-09-14
Building automation and control systems (BACS) —
Part 2:
Hardware
Systèmes de gestion technique du bâtiment —
Partie 2: Équipement
ICS: 91.040.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization
(CEN), and processed under the CEN lead mode of collaboration as defined in the
Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
THIS DOCUMENT IS A DRAFT CIRCULATED
bodies for a parallel five month enquiry.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16484-2:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

ISO/DIS 16484-2:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO/DIS 16484-2:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviations, acronyms and symbols, .32
5 Requirements .34
5.1 BACS components . .34
5.1.1 Hardware components and system functionality .34
5.1.2 System configuration .34
5.1.3 Basic hardware performance criteria .35
5.2 Management devices .35
5.2.1 General.35
5.2.2 Data processing device, server station .36
5.2.3 Peripherals .36
5.2.4 Interfaces .38
5.2.5 Alarm indication and annunciation devices .39
5.3 Control devices .40
5.3.1 General.40
5.3.2 Controller .41
5.3.3 Application specific controller .47
5.4 Field devices .48
5.4.1 General.48
5.4.2 Coupling module .48
5.4.3 Local override/indication device .49
5.4.4 Sensors .50
5.4.5 Actuators.52
5.4.6 Room device .55
5.5 Cabling .55
5.6 System communications .56
5.6.1 General.56
5.6.2 Interconnection of devices within networks .58
5.6.3 Interconnection of devices between networks.58
5.6.4 Communications protocol.59
5.7 Engineering/commissioning tools.59
5.7.1 General.59
5.7.2 Engineering tools.59
5.7.3 Commissioning tools .59
Annex A (informative) General safety requirements and environmental conditions .61
Annex B (informative) Normative references to international publications with their
corresponding European publications .62
Bibliography .63
ISO/DIS 16484-2:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 205, “Building environment design”.
ISO 16484-2 is part of the EN ISO 16484- series of International Standards under the general title
Building Automation and Control Systems (BACS) and consists of the following parts:
Part 1: Overview and Vocabulary
Part 2: Hardware
Part 3: Functions
Part 4: Applications
Part 5: Data communication - Protocol
Part 6: Data communication - Conformance testing
Part 7: Project specification and implementation
In this standard, Annex A: General safety requirements and environmental conditions and the Bibliography
are both informative.
iv © ISO 2016 – All rights reserved

ISO/DIS 16484-2:2016(E)
Introduction
This series of standards is intended for design of new buildings and retrofit of existing buildings for an
acceptable indoor environment, practical energy conservation and efficiency.
The application of this series of standards for BACS is envisaged as follows:
— the environmental design for all building types requires complex methods for automation and
control. The functional integration of services other than HVAC e.g. lighting and electric power
distribution control, security control, transportation, maintenance management or facilities
management is a general task for all parties employed to develop an integrated multi-application
system. This integration allows the user to take advantage of synergies between the different
applications. This standard will give guidance to architects, consultants and contractors as well as
to users on how to share such resources,
— the innovation cycles between devices, systems and networks vary. To make it possible to add
and to change existing devices, and extend the building automation and control network, several
interfaces both proprietary and standardized are defined between the BACS network and the other
systems. A manufacturer can design a product, both to meet his spec
...