SIST EN 3490:2025

SLOVENSKI STANDARD
01-november-2025
Aeronavtika - Jeklo X15CrNi17-3 (1.4057) - Taljeno - Utrjeno in mehko žarjeno -
Palice za obdelavo - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered -
Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Luft- und Raumfahrt - Stahl X15CrNi17-3 (1.4057) - Lufterschmolzen - Gehärtet und
angelassen - Stangen zur spanenden Bearbeitung - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1
100 MPa
Série aérospatiale - Acier X15CrNi17-3 (1.4057) - Élaboré à l’air - Trempé et revenu -
Barres pour usinage - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Ta slovenski standard je istoveten z: EN 3490:2025
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3490
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2025
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3490:2007
English Version
Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted
- Hardened and tempered - Bars for machining - De  200
mm - 900 MPa  Rm  1 100 MPa
Série aérospatiale - Acier X15CrNi17-3 (1.4057) - Luft- und Raumfahrt - Stahl X15CrNi17-3 (1.4057) -
Élaboré à l'air - Trempé et revenu - Barres pour Lufterschmolzen - Gehärtet und angelassen - Stangen
usinage - De  200 mm - 900 MPa  Rm  1 100 MPa zur spanenden Bearbeitung - De  200 mm - 900 MPa 
Rm  1 100 MPa
This European Standard was approved by CEN on 27 July 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3490:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 3490:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by March 2026, and conflicting national standards shall be withdrawn
at the latest by March 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 3490:2007.
— EN 3490 (P2), 03/2007 – Update of the material designation, correction of the format of Table 1 to
comply with the requirem
...