kSIST FprEN 303 345 V1.1.7:2017

Draft ETSI EN 303 345 V1.1.1 (2016-07)

HARMONISED EUROPEAN STANDARD
Broadcast Sound Receivers;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

2 Draft ETSI EN 303 345 V1.1.1 (2016-07)

Reference
DEN/ERM-TG17-15
Keywords
broadcast, digital, Harmonised standard, radio,
receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Broadcast radio modulation methods . 8
4.2.2 Broadcast radio frequency bands . 8
4.2.3 Test signal configurations . 9
4.2.3.1 AM testing. 9
4.2.3.2 FM testing . 9
4.2.3.3 DAB testing. 10
4.2.3.4 DRM testing . 10
4.2.4 Sensitivity . 10
4.2.4.1 Definition . 10
4.2.4.2 Limits . 10
4.2.4.3 Conformance . 11
4.2.5 Adjacent channel selectivity and blocking . 11
4.2.5.1 Definition . 11
4.2.5.2 Limits . 12
4.2.5.3 Conformance . 13
4.2.6 Unwanted emissions in the spurious domain . 13
4.2.6.1 Definition . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Interpretation of the measurement results . 14
5.3 Methods of measurement . 14
5.3.1 Generic methods of measurement . 14
5.3.2 Generic measurement set-up for radiated testing . 15
5.3.3 Generic measurement set-up for equipment for conducted testing . 16
5.3.4 Sensitivity measurement methods . 17
5.3.4.1 AM and FM sensitivity measurements . 17
5.3.4.2 DAB and DRM sensitivity measurements . 17
5.3.5 Adjacent channel selectivity and blocking measurement methods . 17
5.3.5.1 AM and FM adjacent channel selectivity and blocking measurements. 17
5.3.5.2 DAB and DRM adjacent channel selectivity and blocking measurements . 18
5.3.6 Unwanted emissions in the spurious domain . 18
5.3.6.1 Methods of measurement . 18
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (informative): Commentary on development of the present document . 20
ETSI
4 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Annex C (informative): Change History . 21
History . 22

ETSI
5 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.9] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document describes the requirements for radio broadcast receivers to meet the essential requirements of
article 3.2 of Directive 2014/53/EU [i.1].
ETSI
6 Draft ETSI EN 303 345 V1.1.1 (2016-07)
1 Scope
The present document applies to devices, including the supplied antenna, that receive broadcast sound services, whether
analogue or digital modulation is used. Multi-function devices may also fall under the requirements of other documents.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V1.4.1) (06-2006): "Radio Broad
...

Final draft ETSI EN 303 345 V1.1.7 (2017-03)

HARMONISED EUROPEAN STANDARD
Broadcast Sound Receivers;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

2 Final draft ETSI EN 303 345 V1.1.7 (2017-03)

Reference
DEN/ERM-TG17-15
Keywords
broadcast, digital, harmonised standard, radio,
receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 303 345 V1.1.7 (2017-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Broadcast radio modulation methods . 8
4.2.2 Broadcast radio frequency bands . 9
4.2.3 Test signal configurations . 9
4.2.3.1 AM testing. 9
4.2.3.2 FM testing . 9
4.2.3.3 DAB testing. 10
4.2.3.4 DRM testing . 10
4.2.4 Sensitivity . 10
4.2.4.1 Definition . 10
4.2.4.2 Limits . 10
4.2.4.3 Conformance . 11
4.2.5 Adjacent channel selectivity and blocking . 11
4.2.5.1 Definition . 11
4.2.5.2 Limits . 12
4.2.5.3 Conformance . 13
4.2.6 Unwanted emissions in the spurious domain . 13
4.2.6.1 Definition . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Interpretation of the measurement results . 14
5.3 Methods of measurement . 14
5.3.1 Generic methods of measurement . 14
5.3.2 Generic measurement set-up for radiated testing . 15
5.3.3 Generic measurement set-up for equipment for conducted testing . 17
5.3.4 Sensitivity measurement methods . 18
5.3.4.1 AM and FM sensitivity measurements . 18
5.3.4.2 DAB and DRM sensitivity measurements . 18
5.3.5 Adjacent channel selectivity and blocking measurement methods . 18
5.3.5.1 AM and FM adjacent channel selectivity and blocking measurements. 18
5.3.5.2 DAB and DRM adjacent channel selectivity and blocking measurements . 19
5.3.6 Unwanted emissions in the spurious domain . 19
5.3.6.1 Methods of measurement . 19
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 20
Annex B (informative): Commentary on development of the present document . 21
ETSI
4 Final draft ETSI EN 303 345 V1.1.7 (2017-03)
Annex C (informative): Measurement set-up for electrical methods during radiated testing . 22
Annex D (informative): Change History . 23
History . 24

ETSI
5 Final draft ETSI EN 303 345 V1.1.7 (2017-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.9] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document describes the requirements for radio broadcast receivers to meet the essential requirements of
article 3.2 of Directive 2014/53/EU [i.1].
ETSI
6 Final draft ETSI EN 303 345 V1.1.7 (2017-03)
1 Scope
The present document specifies technical characteristics and methods of measurements for devices, including the
supplied antenna, that receive broadcast sound services, whether analogue or digital modulation is used. Multi-function
devices may also fall under the requirements of other documents.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio Broadcasting Systems; Digital Audio Br
...

SLOVENSKI STANDARD
oSIST prEN 303 345 V1.1.1:2016
01-september-2016
5DGLRGLIX]QLVSUHMHPQLNL+DUPRQL]LUDQLVWDQGDUGNL]DMHPDELVWYHQH]DKWHYH
þOHQDGLUHNWLYH(8
Radio Broadcast Receivers - Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU
Ta slovenski standard je istoveten z: ETSI EN 303 345 V1.1.1 (2016-07)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
oSIST prEN 303 345 V1.1.1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 303 345 V1.1.1:2016

oSIST prEN 303 345 V1.1.1:2016
Draft ETSI EN 303 345 V1.1.1 (2016-07)

HARMONISED EUROPEAN STANDARD
Broadcast Sound Receivers;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

oSIST prEN 303 345 V1.1.1:2016
2 Draft ETSI EN 303 345 V1.1.1 (2016-07)

Reference
DEN/ERM-TG17-15
Keywords
broadcast, digital, Harmonised standard, radio,
receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
oSIST prEN 303 345 V1.1.1:2016
3 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Broadcast radio modulation methods . 8
4.2.2 Broadcast radio frequency bands . 8
4.2.3 Test signal configurations . 9
4.2.3.1 AM testing. 9
4.2.3.2 FM testing . 9
4.2.3.3 DAB testing. 10
4.2.3.4 DRM testing . 10
4.2.4 Sensitivity . 10
4.2.4.1 Definition . 10
4.2.4.2 Limits . 10
4.2.4.3 Conformance . 11
4.2.5 Adjacent channel selectivity and blocking . 11
4.2.5.1 Definition . 11
4.2.5.2 Limits . 12
4.2.5.3 Conformance . 13
4.2.6 Unwanted emissions in the spurious domain . 13
4.2.6.1 Definition . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Interpretation of the measurement results . 14
5.3 Methods of measurement . 14
5.3.1 Generic methods of measurement . 14
5.3.2 Generic measurement set-up for radiated testing . 15
5.3.3 Generic measurement set-up for equipment for conducted testing . 16
5.3.4 Sensitivity measurement methods . 17
5.3.4.1 AM and FM sensitivity measurements . 17
5.3.4.2 DAB and DRM sensitivity measurements . 17
5.3.5 Adjacent channel selectivity and blocking measurement methods . 17
5.3.5.1 AM and FM adjacent channel selectivity and blocking measurements. 17
5.3.5.2 DAB and DRM adjacent channel selectivity and blocking measurements . 18
5.3.6 Unwanted emissions in the spurious domain . 18
5.3.6.1 Methods of measurement . 18
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (informative): Commentary on development of the present document . 20
ETSI
oSIST prEN 303 345 V1.1.1:2016
4 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Annex C (informative): Change History . 21
History . 22

ETSI
oSIST prEN 303 345 V1.1.1:2016
5 Draft ETSI EN 303 345 V1.1.1 (2016-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.9] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document describes the requirements for radio broadcast receivers to meet the essential requirements of
article 3.2 of Directive 2014/53/EU [i.1].
ETSI
oSIST prEN 303 345 V1.1.1:2016
6 Draft ETSI EN 303 345 V1.1.1 (2016-07)
1 Scope
The present document applies to devices, including the supplied antenna, that receive broadcast sound services, whether
analogue or digital modulation is used. Multi-function devices may also fall under the requirements of other documents.
The present docum
...