SIST EN 13763-27:2025
(Main)Explosives for civil uses - Detonators and detonating cord relays - Part 27: Test methods for electronic initiation systems
Explosives for civil uses - Detonators and detonating cord relays - Part 27: Test methods for electronic initiation systems
This document specifies test methods for electronic initiation systems.
The test methods for electronic initiation systems refer to complete electronic initiation systems but also to electronic detonators, wireless electronic detonators and to firing units, programming units, testing units and control units that are part of an electronic initiation system.
Other parts of the EN 13763 series contain test methods applicable to electronic detonators, too.
This document does not apply to electric, non-electric, plain and semi-finished detonators, surface connectors, detonating cord relays, coupling accessories, leading wires and shock tubes.
Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverzögerer - Teil 27: Prüfverfahren für elektronische Zündsysteme
Dieses Dokument legt Prüfverfahren für elektronische Zündsysteme fest.
Die Prüfverfahren für elektronische Zündsysteme beziehen sich auf vollständige elektronische Zündsysteme, aber auch auf elektronische Zünder, drahtlose elektronische Zünder und Zündeinheiten, Programmiereinheiten, Prüfeinheiten und Steuereinheiten, die Teil eines elektronischen Zündsystems sind.
Auch andere Teile der Normenreihe EN 13763 enthalten auf elektronische Zünder anwendbare Prüfverfahren.
Dieses Dokument ist nicht für elektrische und nichtelektrische Zünder, Sprengkapseln, halbfertige Zünder, Oberflächenverbinder, Sprengverzögerer, Verbinder, Zünderdrähte und Zündschläuche anwendbar.
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 27 : Méthodes d’essai pour systèmes d’amorçage électroniques
Le présent document spécifie les méthodes d’essai pour les systèmes d’amorçage électroniques.
Les méthodes d’essai pour systèmes d’amorçage électroniques font référence aux systèmes d’amorçage électroniques complets, mais aussi aux détonateurs électroniques, aux détonateurs électroniques sans fil et aux consoles de tir, unités de programmation, unités de test et unités de contrôle qui font partie d’un système d’amorçage électronique.
D’autres parties de la série EN 13763 contiennent des méthodes qui s’appliquent également aux détonateurs électroniques.
Le présent document ne s’applique pas aux détonateurs électriques, non électriques, pyrotechniques et semi finis, aux connecteurs de surface, relais pour cordeau détonant, manchons d’accouplement, fils d’amorce et tubes à transmission d’ondes de choc.
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 27. del: Preskusne metode za elektronske sisteme za aktiviranje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 27. del: Preskusne
metode za elektronske sisteme za aktiviranje
Explosives for civil uses - Detonators and detonating cord relays - Part 27: Test methods
for electronic initiation systems
Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverzögerer - Teil 27:
Prüfverfahren für elektronische Zündsysteme
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 27 :
Méthodes d’essai pour systèmes d’amorçage électroniques
Ta slovenski standard je istoveten z: EN 13763-27:2025
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13763-27
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2025
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes CEN/TS 13763-27:2003
English Version
Explosives for civil uses - Detonators and detonating cord
relays - Part 27: Test methods for electronic initiation
systems
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 27 : Méthodes d'essai pour Sprengschnurverzögerer - Teil 27: Prüfverfahren für
systèmes d'amorçage électroniques elektronische Zündsysteme
This European Standard was approved by CEN on 29 September 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13763-27:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Test methods for electronic initiation systems . 10
4.1 Verification of completeness of HAZOP . 10
4.1.1 Principle . 10
4.1.2 Test apparatus . 10
4.1.3 Preparation of test sample . 10
4.1.4 Procedure . 11
4.1.5 Expression of result . 11
4.1.6 Test report . 11
4.2 Verification of uniqueness of fire command . 11
4.2.1 Principle . 11
4.2.2 Test apparatus . 11
4.2.3 Preparation of test sample . 11
4.2.4 Procedure . 11
4.2.5 Expression of result . 11
4.2.6 Test report . 11
4.3 Verification of the latency of electronic initiation systems . 12
4.3.1 Principle . 12
4.3.2 Test apparatus . 12
4.3.3 Preparation of test sample . 12
4.3.4 Procedure . 12
4.3.5 Expression of results . 12
4.3.6 Test report . 12
4.4 Verification of data error detection on transmitted information in electronic initiating
systems . 13
4.4.1 Principle . 13
4.4.2 Test apparatus . 13
4.4.3 Preparation of test sample . 13
4.4.4 Procedure . 13
4.4.5 Expression of results . 13
4.4.6 Test report . 13
4.5 Verification of the electromagnetic compatibility of electronic initiation systems . 14
4.5.1 General. 14
4.5.2 Verification of the resistance to high-level conducted and radiated electromagnetic
disturbances . 14
4.5.3 Verification of the resistance to low-level conducted and radiated electromagnetic
disturbances . 16
4.5.4 Verification of the resistance to surge . 19
4.5.5 Verification of the resistance to electrical fast transients and bursts . 22
4.5.6 Verification of the resistance to voltage dips and short interruptions . 25
4.5.7 Verification of the resistance to electrostatic discharge . 28
4.5.8 Verification of Radio Frequency emission . 30
4.6 Verification of delay accuracy of electronic initiation systems . 32
4.6.1 Principle . 32
4.6.2 Test apparatus . 32
4.6.3 Preparation of test sample . 33
4.6.4 Procedure . 35
4.6.5 Expression of result . 36
4.6.6 Test report . 36
5 Test methods for electronic detonators . 37
5.1 Verification of the resistance to overvoltage of electronic detonators with leading wires
............................................................................................................................................................................. 37
5.1.1 Principle . 37
5.1.2 Test apparatus . 37
5.1.3 Preparation of test sample . 37
5.1.4 Procedure . 38
5.1.5 Expression of results . 39
5.1.6 Test report . 39
5.2 Verification of resistance to dynamic pressure of electronic detonators . 40
5.2.1 Principle . 40
5.2.2 Test apparatus . 40
5.2.3 Preparation of test sample . 40
5.2.4 Procedure . 41
5.2.5 Expression of results . 43
5.2.6 Test report . 43
5.3 Verification of resistance to slow temperature changes of electronic detonators . 43
5.3.1 Principle . 43
5.3.2 Test apparatus . 44
5.3.3 Preparation of test sample . 44
5.3.4 Procedure . 44
5.3.5 Expression of result . 44
5.3.6 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.