Abstract

This document specifies the requirements and test procedures for 360° visibility of self-propelled industrial rider-controlled pallet-stacking trucks in accordance with ISO 5053 1 (herein after referred to as trucks), without a load and it is intended to be used in conjunction with EN 16842 1.
This document also applies to pedestrian controlled trucks with foldable platform when used in ride-on mode.
Pedestrian-controlled trucks without an operator on the platform and pedestrian-propelled trucks are not covered by this document.
Where specific requirements in this part are modified from the general requirements in EN 16842 1, the requirements of this part are truck specific and intended to be used for self-propelled industrial stand-on pallet-stacking trucks.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Status
Not Published
Public Enquiry End Date
30-May-2025
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Aug-2026
Due Date
10-Oct-2026

Buy Documents

Draft

oSIST prEN 16842-11:2025

English language (16 pages)
Preview
Preview
e-Library read for
×1 day

SIST EN 16842-11 specifies requirements and test procedures for 360° visibility of self-propelled industrial rider-controlled pallet-stacking trucks without a load. It is intended to be used with EN 16842-1, and it also applies to pedestrian-controlled trucks with foldable platforms when used in ride-on mode. In practice, it gives manufacturers, test laboratories and buyers a common way to check operator visibility on this truck type.

What does SIST EN 16842-11 specify?

SIST EN 16842-11 covers visibility testing for pallet-stacking trucks used by a rider, with the operator in the normal operating position. It addresses significant hazards and hazardous situations linked to operator visibility during intended use and reasonably foreseeable misuse.

The document is organized into:

  • Clause 1, Scope
  • Clause 2, Normative references
  • Clause 3, Terms and definitions
  • Clause 4, Truck configuration
  • Clause 5, Test equipment
  • Clause 6, Test procedures for direct visibility
  • Clause 7, Acceptance criteria
  • Clause 8, Test report
  • Clause 9, Information for use

The scope also makes clear that pedestrian-controlled trucks without an operator on the platform and pedestrian-propelled trucks are not covered.

What are the key requirements of SIST EN 16842-11?

SIST EN 16842-11 builds its specific requirements on the general rules in EN 16842-1, then adds truck-specific test conditions and acceptance criteria for pallet-stacking trucks.

Test configuration and operator reference points

  • Clause 4 requires the truck to be configured according to EN 16842-1, with the fork load-carrying surface at the heel positioned up to 120 mm above the floor. This keeps the test setup repeatable and close to a practical empty-truck condition.
  • Clause 6 uses the operator reference point for the standing or seated position. For stand-on trucks, the Standing Index Point (STIP) is established from the operator foot positions and ankle pivot points; for sit-on trucks, the Seat Index Point (SIP) is used. This matters because the visibility result depends on where the operator is actually located.

Lighting equipment, test paths and measurement

  • Clause 5 applies the general test equipment rules from EN 16842-1, with an exception for trucks with foldable operator platforms. That exception matters because some test positions move the lighting equipment outside the plan-view outline of the truck.
  • Clause 6.1 sets the lighting equipment position and uses a test body or screen to represent an obstacle. The lighting equipment simulates the operator eye positions, so the test checks what the operator can see rather than the truck alone.
  • Clause 6.2 and Figure 4 to Figure 6 define test paths P1 to P9 around the truck. These paths are laid out parallel or perpendicular to the truck axis, so the visibility checks are tied to specific directions around the machine.
  • Clause 6.3 says the measurement procedure in EN 16842-1 applies, combined with the test paths and criteria in this part. That means the results are assessed in a standardised way across the series.

Acceptance criteria for direct and indirect visibility

  • Clause 7 requires the truck to meet the applicable criteria in 7.4 or 7.5, depending on whether the operator faces the line of travel or sits at a right angle to it. The tables separate travelling visibility from manoeuvring visibility, which reflects how the truck is used.
  • Clause 7.1 sets a minimum illuminated area requirement and requires the illuminated area to meet the test-object surface conditions in the relevant table. This ensures the operator can see a meaningful portion of the obstacle, not just a tiny bright patch.
  • Clause 7.2.4 includes a specific fork-arm criterion. The forward half of one fork must be sufficiently visible, which matters because forks are part of the working envelope and can create collision or placement errors.
  • Clause 7.3 directs indirect visibility and auxiliary equipment back to EN 16842-1. This keeps mirrors, cameras or other indirect-view aids under the general series rules.

Reporting and user information

  • Clause 8 requires the test report to follow EN 16842-1. Clause 9 requires handbook information when a load or attachment can restrict visibility. That helps users understand when the visibility condition changes in real use.

What terms does SIST EN 16842-11 define?

  • Truck profile - The outline used for stand-on straddle trucks, based on the largest rectangular width and length parallel to the truck axis, including the front vertical surface of the outriggers.
  • Standing Index Point (STIP) - The reference point used for a stand-on operator position when the visibility test simulates where the operator stands and looks from.
  • Adjusted STIP (ASTIP) - A permitted shifted test position around the STIP used to represent limited body movement during operation.
  • Seat Index Point (SIP) - The reference point used for a sit-on operator position in the visibility test.
  • Test body - The obstacle used in the direct-visibility test to represent something the operator must be able to see.
  • Test screen - The screen used in selected direct-visibility checks where the acceptance criteria call for a screen rather than a test body.

Who uses SIST EN 16842-11?

SIST EN 16842-11 is used by truck manufacturers, test laboratories, and safety or compliance teams working with industrial trucks. It is relevant to engineers who design pallet-stacking trucks, quality managers who verify visibility performance, and certification or conformity staff who need a repeatable test method. It is also useful for buyers and fleet managers who want to understand how visibility performance is checked for this truck category.

What changed in SIST EN 16842-11 from the previous edition?

SIST EN 16842-11 is identified as identical to prEN 16842-11:2025.

Which standards are used with SIST EN 16842-11?

  • EN 16842-1:2018 - Provides the general visibility test requirements, test equipment rules, indirect visibility procedure, test report rules and the overall series framework.
  • EN ISO 3691-1:2015 - Provides the broader safety requirements and verification rules for self-propelled industrial trucks.
  • ISO 5053-1:2020 - Provides the vocabulary and truck type terminology used to classify the trucks covered by this part.

What does the SIST EN 16842-11 document contain?

The document contains figures for locating STIP, ASTIP and SIP, plus the test-path layouts around the truck. It also contains two acceptance tables: one for operators facing the line of travel and one for operators facing at a right angle to the line of travel. Those tables support direct-visibility checks for travelling, manoeuvring and fork-arm visibility.

Clause 6 sets out how to position the lighting equipment and how to run the visibility measurements. Clause 7 turns those measurements into pass-or-fail criteria for the truck orientation under test. Clauses 8 and 9 cover the test report and the handbook information that users need when loads or attachments restrict visibility.

Relations

Effective Date
25-Aug-2026
Effective Date
25-Aug-2026
Effective Date
25-Aug-2026

Buy Documents

Draft

oSIST prEN 16842-11:2025

English language (16 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

SIST EN 16842-11:2027 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Powered industrial trucks - Visibility - Test methods and verification - Part 11: Pallet stacking trucks (rider controlled)". This standard covers: This document specifies the requirements and test procedures for 360° visibility of self-propelled industrial rider-controlled pallet-stacking trucks in accordance with ISO 5053 1 (herein after referred to as trucks), without a load and it is intended to be used in conjunction with EN 16842 1. This document also applies to pedestrian controlled trucks with foldable platform when used in ride-on mode. Pedestrian-controlled trucks without an operator on the platform and pedestrian-propelled trucks are not covered by this document. Where specific requirements in this part are modified from the general requirements in EN 16842 1, the requirements of this part are truck specific and intended to be used for self-propelled industrial stand-on pallet-stacking trucks. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

This document specifies the requirements and test procedures for 360° visibility of self-propelled industrial rider-controlled pallet-stacking trucks in accordance with ISO 5053 1 (herein after referred to as trucks), without a load and it is intended to be used in conjunction with EN 16842 1. This document also applies to pedestrian controlled trucks with foldable platform when used in ride-on mode. Pedestrian-controlled trucks without an operator on the platform and pedestrian-propelled trucks are not covered by this document. Where specific requirements in this part are modified from the general requirements in EN 16842 1, the requirements of this part are truck specific and intended to be used for self-propelled industrial stand-on pallet-stacking trucks. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

SIST EN 16842-11:2027 is classified under the following ICS (International Classification for Standards) categories: 53.060 - Industrial trucks. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 16842-11:2027 has the following relationships with other standards: It is inter standard links to SIST EN ISO 3691-1:2015, SIST EN ISO 3691-1:2015/A1:2020, SIST EN 16842-1:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 16842-11:2027 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

SIST EN 16842-11:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 16842-11:2025
01-maj-2025
Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika -
Preskusne metode in preverjanje - 11. del: Viličar (ki ga upravlja voznik)
Powered industrial trucks - Visibility - Test methods and verification - Part 11: Pallet
stacking trucks (rider controlled)
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil
11: Gabelhochhubwagen (Mitfahrer bedient)
Chariots de manutention automoteurs - Visibilité - Méthode d'essai et vérification - Partie
11 : Chariot à fourche (conducteur porté)
Ta slovenski standard je istoveten z: prEN 16842-11
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 16842-11:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 16842-11:2025
oSIST prEN 16842-11:2025
DRAFT
EUROPEAN STANDARD
prEN 16842-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2025
ICS 53.060
English Version
Powered industrial trucks - Visibility - Test methods and
verification - Part 11: Pallet stacking trucks (rider
controlled)
Chariots de manutention automoteurs - Visibilité - Kraftbetriebene Flurförderzeuge - Sichtverhältnisse -
Méthode d'essai et vérification - Partie 11 : Chariot à Prüfverfahren und Verifikation - Teil 11:
fourche (conducteur porté) Gabelhochhubwagen (Mitfahrer bedient)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 150.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16842-11:2025 E
worldwide for CEN national Members.

oSIST prEN 16842-11:2025
prEN 16842-11:2025 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Truck configuration . 5
4.1 General. 5
4.2 Fork height . 5
5 Test equipment . 5
6 Test procedures for direct visibility . 5
6.1 Lighting equipment position . 5
6.1.1 General. 5
6.1.2 Stand-on operated trucks . 5
6.1.3 Sit-on operated trucks . 8
6.2 Test paths for rider-controlled pallet-stacking trucks . 9
6.3 Measurement procedure . 9
6.4 Test procedure for indirect visibility . 9
7 Acceptance criteria. 9
7.1 General. 9
7.2 Direct visibility . 10
7.2.1 General. 10
7.2.2 Travelling visibility . 10
7.2.3 Manoeuvring visibility . 10
7.2.4 Fork arms . 10
7.3 Indirect visibility . 10
7.4 Criteria for pallet stacking trucks where the operator is facing the line of travel . 14
7.5 Criteria for pallet stacking trucks where the operator is facing in a right angle to the line of
travel . 15
8 Test report . 16
9 Information for use . 16

oSIST prEN 16842-11:2025
prEN 16842-11:2025 (E)
European foreword
This document (prEN 16842-11:2025) has been prepared by Technical Committee CEN/TC 150
“Industrial Trucks – Safety”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document is intended to be used in combination with the requirements in EN 16842-1. The
EN 16842 series consists of the following parts under the general title “Powered industrial trucks –
Visibility – Test methods and verification”:
— part 1: General requirements;
— part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg
capacity;
— part 3: Reach trucks up to and including 10 000 kg capacity;
— part 4: Industrial variable reach trucks up to and including 10 000 kg capacity;
— part 5: Industrial variable reach trucks greater than 10 000 kg capacity;
— part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg
capacity;
— part 7: Variable reach and masted container trucks handling freight containers of 6 m (20 ft) length
and longer;
— part 8: Stand on counterbalance trucks up to and including 10 000 kg capacity;
— part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position;
— part 10: Towing and pushing tractors and burden carrier;
— part 11: Pallet stacking trucks (rider-controlled).
It is intended to develop the parts related to the following machinery:
— single side loader;
— multi-directional forklift truck;
— non-stacking low-lift straddle carrier (as defined in ISO 5053-1:2020, 3.18);
— stacking high-lift straddle carrier (as defined in ISO 5053-1:2020, 3.19).
oSIST prEN 16842-11:2025
prEN 16842-11:2025 (E)
1 Scope
This document specifies the requirements and test procedures for 360° visibility of self-propelled
industrial rider-controlled pallet-stacking trucks in accordance with ISO 5053-1 (herein after referred to
as trucks), without a load and it is intended to be used in conjunction with EN 16842-1.
This document also applies to pedestrian controlled trucks with foldable platform when used in ride-on
mode.
Pedestrian-controlled and pedestrian-propelled trucks are not covered by this document.
Where specific requirements in this part are modified from the general requirements in EN 16842-1, the
requirements of this part are truck specific and intended to be used for self-propelled industrial stand-
on pallet-stacking trucks.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events
relevant to the visibility of the operator for applicable machines when used as intended and under
conditions of misuse which are reasonably foreseeable by the manufacturer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16842-1:2018, Powered industrial trucks — Visibility — Test methods and verification — Part 1:
General requirements
EN ISO 3691-1:2015, Industrial trucks —- Safety requirements and verification — Part 1: Self-propelled
industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
(ISO 3691-1:2011, including Cor 1:2013)
ISO 5053-1:2020, Industrial trucks — Vocabulary — Part 1: Types of industrial trucks
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16842-1:2018, ISO 5053-1:2020
and EN ISO 3691-1:2015 and the following apply.
NOTE Definition 3.1 of EN 16842-1:2018 is not applicable for stand-on straddle trucks covered by this part.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
truck profile
contour which is determined by the largest rectangular width and length
parallel to the longitudinal axis of the truck, including the front vertical surface of the outriggers
Note 1 to entry: The blades of the fork arms are not taken into account.

As impacted by EN ISO 3691-1:2015/AC:2016 and EN ISO 3691-1:2015
...