General Information

Abstract

CR SMG#31

Status
Published
Publication Date
31-Jan-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2005
Due Date
01-Feb-2005
Completion Date
01-Feb-2005

Buy Documents

Standard

SIST EN 300 607-1 V7.2.1:2005

English language (2691 pages)
Preview
Preview
e-Library read for
×1 day

Overview

SIST EN 300 607-1 V7.2.1:2005 is the Slovene adoption of the European standard EN 300 607-1 V7.2.1 (GSM 11.10-1 Release 1998) for the Digital Cellular Telecommunications System (Phase 2+) (GSM). The document focuses on the conformance specification for Mobile Stations (MS), defining requirements and methodologies to ensure that GSM devices adhere to mandatory standards for interoperability, quality, and regulatory compliance within GSM networks. Published by the Slovenski inštitut za standardizacijo (SIST), this standard is directly aligned with the requirements laid out by ETSI for GSM mobile stations.

Key Topics

This GSM standard covers a comprehensive range of topics essential for mobile station conformance testing:

  • Scope and Applicability: Definitions of mobile station configurations and their applicability across diverse GSM network scenarios.
  • Test Methodologies: Procedures for testing the conformance of different protocol layers (Layer 1 - physical, Layer 2 - data link, and Layer 3 - network).
  • Test Equipment: Specifications on the functional requirements for equipment used during testing.
  • Call Setup Procedures: Generic procedures for speech and data calls, including mobile-terminating and originating scenarios, as well as multislot configurations relevant for high-speed transmissions.
  • Service and Feature Verification: Tests to verify mobile station support for services such as multiple numbering schemes, ISDN, AoCC (Advice of Charge Charging), call hold, multiparty, Fixed Dialling Number (FDN), IMEI security, and coding of Bearer Capability information.
  • Transceiver Requirements: Radio frequency performance criteria including spurious emissions (conducted and radiated), frequency error, power output, modulation, and spectrum measurements.
  • Transmitter and Receiver Tests: Conformance requirements focusing on transmitter parameters (frequency error under different conditions, output power, spectral purity) and receiver criteria (sensitivity, co-channel rejection, adjacent channel rejection, blocking, AM suppression, and GPRS-specific receiver tests).
  • Timing and Handover: Requirements for timing advance, absolute delay, reception time tracking speed, and access times during handovers.
  • Cell Selection and Reselection: Procedures and parameters for mobile station cell selection and reselection to maximize network performance and minimize service interruptions.

Applications

The SIST EN 300 607-1 V7.2.1:2005 standard is vital for:

  • GSM Mobile Device Manufacturers: Ensuring that devices meet GSM conformance requirements for operation on public GSM networks.
  • Test Laboratories and Certification Bodies: Implementing standardized test protocols for assessing mobile station compliance.
  • Mobile Network Operators: Validating interoperability and network compatibility of mobile devices before deployment.
  • Research and Development: Assisting R&D teams in developing, optimizing, and troubleshooting GSM mobile station implementations.

Adherence to this conformance specification ensures device interoperability, quality of service, and regulatory acceptance in international GSM markets.

Related Standards

This standard is closely related to:

  • ETSI EN 300 607-1 V7.2.1 - The European reference for GSM mobile station conformance testing.
  • GSM 11.10-1 - The core specification for mobile station conformance in the GSM standard series.
  • IEC 33.070.50 - Relates to the international classification of information and communication technology standards for GSM.
  • Other 3GPP and ETSI GSM Standards - Covering technical requirements, testing methods, and network interoperability.

By following SIST EN 300 607-1 V7.2.1:2005, stakeholders guarantee that GSM mobile stations deliver reliable, compliant performance within the global telecommunications ecosystem.

Keywords: GSM standard, mobile station conformance, SIST EN 300 607-1 V7.2.1, ETSI, GSM 11.10-1, telecommunications standard, mobile device testing, GSM network compliance.

Buy Documents

Standard

SIST EN 300 607-1 V7.2.1:2005

English language (2691 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST EN 300 607-1 V7.2.1:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 7.2.1 Release 1998)". This standard covers: CR SMG#31

CR SMG#31

SIST EN 300 607-1 V7.2.1:2005 is classified under the following ICS (International Classification for Standards) categories: 33.070.50 - Global System for Mobile Communication (GSM). The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 300 607-1 V7.2.1:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2005
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHP ID]D 6SHFLILNDFLMDVNODGQRVWL
PRELOQHSRVWDMH 06 GHO6SHFLILNDFLMDVNODGQRVWL *60UD]OLþLFD
L]GDMD
Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station (MS)
conformance specification; Part 1: Conformance specification (GSM 11.10-1 version
7.2.1 Release 1998)
Ta slovenski standard je istoveten z: EN 300 607-1 Version 7.2.1
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI EN 300 607-1 V7.2.1 (2000-08)
European Standard (Telecommunications series)
Digital cellular telecommunications system (Phase 2+);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification
(GSM 11.10-1 version 7.2.1 Release 1998)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
(GSM 11.10-1 version 7.2.1 Release 1998) 2 ETSI EN 300 607-1 V7.2.1 (2000-08)
Reference
REN/SMG-071110Q7R2-1
Keywords
Digital cellular telecommunications system, Global
System for Mobile communications (GSM)
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+334 92944200 Fax:+33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In
case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within
ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 3 ETSI EN 300 607-1 V7.2.1 (2000-08)
Contents
Intellectual Property Rights.37
Foreword.37
1 Scope.38
2 References.38
3 Definitions, conventions, and applicability.44
3.1 Mobile station definition and configurations.44
3.2 Applicability.44
3.2.1 Applicability of this specification.44
3.2.2 Applicability of the individual tests.45
3.2.3 Applicability to terminal equipment .69
3.3 Definitions.69
3.4 Conventions for mathematical notations .69
3.4.1 Mathematical signs .69
3.4.2 Powers to the base 10.69
3.5 Conventions on electrical terms .70
3.5.1 Radio Frequency (RF) input signal level .70
3.5.2 Reference sensitivity level .70
3.5.3 Power level of fading signal .70
3.6 Terms on test conditions.71
3.6.1 Radio test conditions.71
4 Test Equipment.72
4.1 Terms used to describe test equipment in this EN.72
4.2 Functional requirements of test equipment .72
5 Testing methodology in general (layers 1, 2, and 3).72
5.1 Testing of optional functions and procedures.72
5.2 Test interfaces and facilities .73
5.3 Different protocol layers .73
5.4 Information to be provided by the apparatus supplier .73
5.5 Definitions of transmit and receive times.73
6 Reference test methods .74
6.1 General .74
6.2 Choice of frequencies in the frequency hopping mode .74
6.3 "Ideal" radio conditions.74
6.4 Standard test signals .75
6.5 Power (control) levels .75
7 Implicit testing.75
8 Measurement uncertainty.75
9 Format of tests.75
10 Generic call set up procedures.76
10.1 Generic call set-up procedure for mobile terminating speech calls.76
10.2 Generic call set-up procedure for mobile originating speech calls.81
10.3 Generic call set-up procedure for mobile terminating data calls .84
10.4 Generic call set-up procedure for mobile originating data calls.86
10.5 Generic call set-up procedure for mobile terminating multislot configuration, minimum number of timeslots
allocated .90
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 4 ETSI EN 300 607-1 V7.2.1 (2000-08)
10.6 Generic call set-up procedure for mobile originating multislot configuration, minimum number of timeslots
allocated .93
11 General tests.97
11.1 Verification of support and non-support of services (multiple numbering scheme or ISDN).97
11.1.1 Mobile Terminated (MT) calls.97
11.1.2 Mobile Originated (MO) calls .98
11.2 Verification of support of the single numbering scheme.99
11.3 Verification of non-support of services (Advice of Charge Charging (AoCC)).100
11.4 Verification of non-support of services (call hold).102
11.5 Verification of non-support of services (multiparty).102
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)) .103
11.7 IMEI Security.104
11.8 Coding of the Bearer Capability information element.105
11.8.1 Network to MS Direction .106
11.8.1.1 BS 21 to 26 - Asynchronous Service .106
11.8.1.1.1 BS 21 .106
11.8.1.1.2 BS 22 .110
11.8.1.1.3 BS 24 .110
11.8.1.1.4 BS 25 .110
11.8.1.1.5 BS 26 .110
11.8.1.1.6 BS 23 .110
11.8.1.2 BS 31 to 34 - Synchronous Service.111
11.8.1.2.1 BS 32 .111
11.8.1.2.2 BS 31 .115
11.8.1.2.3 BS 33 .116
11.8.1.2.4 BS 34 .116
11.8.1.3 BS 61 - Alternate Speech / Data.116
11.8.1.3.1 Speech/Asynchronous Data, Transparent.117
11.8.1.3.2 Speech/Asynchronous Data, Non Transparent .119
11.8.1.3.3 Speech/Synchronous Data .121
11.8.1.4 BS 81 - Speech followed by Data .122
11.8.1.4.1 Speech followed by Asynchronous Data.122
11.8.1.4.2 Speech followed by Synchronous Data .122
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3.122
11.8.1.5.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent .123
11.8.1.5.2 TS 61 - Alternate Speech / Facsimile group 3, Non-Transparent.124
11.8.1.6 TS 62 - Automatic Facsimile group 3 .125
11.8.2 MS to SS direction.125
11.8.2.1 BS 21 to 26 - Asynchronous Service .125
11.8.2.1.1 BS 21 .126
11.8.2.1.2 BS 22 .130
11.8.2.1.3 BS 24 .130
11.8.2.1.4 BS 25 .130
11.8.2.1.5 BS 26 .130
11.8.2.1.6 BS 23 .130
11.8.2.2 BS 31 to 34 - Synchronous Service.131
11.8.2.2.1 BS 32 .131
11.8.2.2.2 BS 31 .135
11.8.2.2.3 BS 33 .136
11.8.2.2.4 BS 34 .136
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous .137
2)
11.8.2.3.1 BS 41 .137
11.8.2.3.2 BS 42 .139
11.8.2.3.3 BS 44 .139
11.8.2.3.4 BS 45 .139
11.8.2.3.5 BS 46 .139
11.8.2.3.6 BS 43 .139
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 5 ETSI EN 300 607-1 V7.2.1 (2000-08)
11.8.2.4 BS 51 to 53 - Packet Service Synchronous .140
2)
11.8.2.4.1 BS 51 .140
11.8.2.4.2 BS 52 .140
11.8.2.4.3 BS 53 .140
11.8.2.5 BS 61 - Alternate Speech / Data.141
11.8.2.5.1 Speech/Asynchronous Data, Transparent.141
11.8.2.5.2 Speech/Asynchronous Data, Non Transparent .144
11.8.2.5.3 Speech/Synchronous Data .146
11.8.2.6 BS 81 - Speech followed by Data .147
11.8.2.6.1 Speech followed by Asynchronous Data.147
11.8.2.6.2 Speech followed by Synchronous Data .147
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3.147
11.8.2.7.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent .148
11.8.2.7.2 TS 61 - Alternate Speech / Facsimile group 3, Non Transparent .149
11.8.2.8 TS 62 - Automatic Facsimile group 3 .150
11.8.2.9 TS 11 and TS 12- Speech.150
11.8.2.9.1 Support of only full/half rate speech version 1.150
11.8.2.9.2 Support of speech full rate version 2 (Enhanced Full Rate) .150
12 Transceiver.152
12.1 Conducted spurious emissions .152
12.1.1 MS allocated a channel.152
12.1.2 MS in idle mode.154
12.2 Radiated spurious emissions.155
12.2.1 MS allocated a channel.155
12.2.2 MS in idle mode.157
12.3 Conducted spurious emissions for MS supporting the R-GSM frequency band .159
12.3.1 MS allocated a channel.159
12.3.2 MS in idle mode.161
12.4 Radiated spurious emissions for MS supporting the R-GSM frequency band .162
12.4.1 MS allocated a channel.163
12.4.2 MS in idle mode.165
13 Transmitter .167
13.1 Frequency error and phase error.167
13.2 Frequency error under multipath and interference conditions.170
13.3 Transmitter output power and burst timing .172
13.4 Output RF spectrum .180
13.5 Intermodulation attenuation.185
13.6 Frequency error and phase error in HSCSD multislot configurations.186
13.7 Transmitter output power and burst timing in HSCSD configurations .189
13.8 Output RF spectrum in HSCSD multislot configuration.198
13.9 Output RF spectrum for MS supporting the R-GSM band.203
13.10 [Reserved for future GSM test] .208
13.11 [Reserved for future GSM test] .208
13.12 [Reserved for future GSM test] .208
13.13 [Reserved for future GSM test] .208
13.14 [Reserved for future GSM test] .208
13.15 [Reserved for future GSM test] .208
13.16 GPRS transmitter tests.208
13.16.1 Frequency error and phase error in GPRS multislot configuration.208
13.16.2 Transmitter output power in GPRS multislot configuration .211
13.16.3 Output RF spectrum in GPRS multislot configuration .219
14 Receiver .225
14.1 Bad frame indication .231
14.1.1 Bad frame indication - TCH/FS.231
14.1.1.1 Bad frame indication - TCH/FS - Random RF input .231
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 6 ETSI EN 300 607-1 V7.2.1 (2000-08)
14.1.1.2 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX .233
14.1.2 Bad frame indication - TCH/HS .234
14.1.2.1 Bad frame indication - TCH/HS - Random RF input.234
14.1.2.2 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX.235
14.1.3 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX - Phase 2 MS in a phase 1
network .236
14.1.4 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX - Phase 2 MS in a phase 1
network .238
14.2 Reference sensitivity .240
14.2.1 Reference sensitivity - TCH/FS .240
14.2.2 Reference sensitivity - TCH/HS (Speech frames) .242
14.2.3 Reference sensitivity - FACCH/F.244
14.2.4 Reference sensitivity - FACCH/H .245
14.2.5 Reference sensitivity - full rate data channels.246
14.2.6 Reference sensitivity - half rate data channels.247
14.2.7 Reference sensitivity - TCH/EFS.248
14.2.8 Reference sensitivity - full rate data channels in multislot configuration.250
14.2.9 Reference sensitivity - TCH/FS for MS supporting the R-GSM band.252
14.3 Usable receiver input level range .253
14.4 Co-channel rejection.255
14.4.1 Co-channel rejection - TCH/FS .255
14.4.2 Co-channel rejection - TCH/HS.257
14.4.3 Co-channel rejection - TCH/HS (SID frames).259
14.4.4 Co-channel rejection - FACCH/F .260
14.4.5 Co-channel rejection - FACCH/H .261
14.4.6 Co-channel rejection - TCH/EFS.262
14.4.7 Receiver performance in the case of frequency hopping and co-channel interference on one carrier.264
14.5 Adjacent channel rejection .265
14.5.1 Adjacent channel rejection - speech channels.265
14.5.2 Adjacent channel rejection - control channels .268
14.6 Intermodulation rejection .270
14.6.1 Intermodulation rejection - speech channels.270
14.6.2 Intermodulation rejection - control channels .271
14.7 Blocking and spurious response .273
14.7.1 Blocking and spurious response - speech channels.273
14.7.2 Blocking and spurious response - control channels .276
14.7.3 Blocking and spurious response - speech channels for MS supporting the R-GSM band .279
14.7.4 Blocking and spurious response - control channels for MS supporting the R-GSM band.282
14.8 AM suppression.285
14.8.1 AM suppression - speech channels .285
14.8.2 AM suppression - control channels.287
14.9 Paging performance at high input levels .288
14.10 [Reserved for future GSM test] .289
14.11 [Reserved for future GSM test] .289
14.12 [Reserved for future GSM test] .289
14.13 [Reserved for future GSM test] .289
14.14 [Reserved for future GSM test] .289
14.15 [Reserved for future GSM test] .289
14.16 GPRS receiver tests.289
14.16.1 Minimum Input level for Reference Performance .291
14.16.2 Co-channel rejection.295
14.16.2.1 Co-channel rejection for packet channels .295
15 Timing advance and absolute delay.298
15.1 Definition and applicability.298
15.2 Conformance requirement.298
15.3 Test purpose .298
15.4 Method of test.298
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 7 ETSI EN 300 607-1 V7.2.1 (2000-08)
15.5 Test requirement.299
15.6 GPRS Timing advance and absolute delay.299
16 Reception time tracking speed.303
16.1 Definition and applicability.303
16.2 Conformance requirement.303
16.3 Test purpose .303
16.4 Method of test.303
16.5 Test requirement.304
17 Access times during handover.305
17.1 Intra cell channel change.305
17.2 Inter cell handover.307
18 Temporary reception gaps.310
18.1 Temporary reception gaps, single slot.310
18.2 Temporary reception gaps in HSCSD multislot configurations .311
19 Channel release after unrecoverable errors .314
19.1 Channel release after unrecoverable errors -1 .314
19.2 Channel release after unrecoverable errors - 2 .315
19.3 Channel release after unrecoverable errors - 3 .316
20 Cell selection and reselection.318
20.1 Cell selection.320
20.2 Cell selection with varying signal strength values .321
20.3 Basic cell reselection.323
20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET, POWER_OFFSET and
PENALTY_TIME parameters.325
20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type 2ter, type 7 and type
8 messages.327
20.6 Cell reselection timings .329
20.7 Priority of cells .331
20.8 Cell reselection when C1 (serving cell) < 0 for 5 seconds .332
20.9 Running average of the surrounding cell BCCH carrier signal levels.334
20.10 Running average of the serving cell BCCH carrier signal level.335
20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH information of a new carrier on
the list.336
20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest neighbour carriers.337
20.13 Decoding the BSIC of the neighbour carriers on the list of six strongest neighbour carriers.338
20.14 Emergency calls .339
20.15 Cell reselection due to MS rejection "LA not allowed" .340
20.16 Downlink signalling failure.342
20.17 Cell selection if no suitable cell found in 10 s.343
20.18 Cell reselection due to MS rejection "Roaming not allowed in this LA" .344
20.19 Cell selection on release of SDCCH and TCH.346
20.20 Multiband cell selection and reselection .347
20.20.1 Multiband cell selection and reselection / Cell Selection .347
20.20.2 Multiband cell selection and reselection / Cell reselection.349
20.21 R-GSM cell selection and reselection .351
20.21.1 R-GSM cell selection.352
20.21.2 R-GMS cell selection with varying signal strength values .354
20.21.3 R-GSM basic cell reselection.356
20.21.4 R-GSM cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET,
POWER_OFFSET and PENALTY_TIME parameters.358
20.21.5 R-GSM cell reselection using parameters transmitted in the System Information type 2bis, type 2ter,
type 7 and type 8 messages.360
20.21.6 R-GSM cell reselection timings.361
20.21.7 R-GSM priority of cells .363
ETSI
(GSM 11.10-1 version 7.2.1 Release 1998) 8 ETSI EN 300 607-1 V7.2.1 (2000-08)
20.21.8 R-GSM cell reselection when C1 (serving cell) < 0 for 5 seconds .364
20.21.9 R-GSM running average of the surrounding cell BCCH carrier signal levels.366
20.21.10 R-GSM running average of the serving cell BCCH carrier signal level .367
20.21.11 Updating the list of six strongest neighbour carriers and decoding the BCCH information of a new
carrier on the list .368
20.21.12 R-GSM decoding the BCCH information of the neighbour carriers on the list of six strongest neighbour
carriers .369
20.21.13 R-GSM decoding the BSIC of the neighbour carriers on the list of six strongest neighbour carriers .370
20.21.14 R-GSM emergency calls.
...