SIST EN 301 815-2 V1.1.1:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification [ITU-T Recommendations Q.2965.1B (2000) and Q.2965.2B (2000), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 815-2 Version 1.1.1SIST EN 301 815-2 V1.1.1:2005en01-januar-2005SIST EN 301 815-2 V1.1.1:2005SLOVENSKI
STANDARD
ETSI ETSI EN 301 815-2 V1.1.1 (2002-07) 2
Reference DEN/SPAN-130251-2 Keywords ATM, B-ISDN, DSS2, PICS, quality, endorsement ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 815-2 V1.1.1:2005

ETSI ETSI EN 301 815-2 V1.1.1 (2002-07) 3 Contents Intellectual Property Rights.4 Foreword.4 Endorsement notice.5 Modifications to ITU-T Recommendation Q.2965.1B.5 Modifications to ITU-T Recommendation Q.2965.2B.8 History.13
ETSI ETSI EN 301 815-2 V1.1.1 (2002-07) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 2 of a multi-part deliverable covering the Digital Subscriber Signalling System No. two (DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) to support Quality of Service class and parameters indication at call/connection establishment, as identified below: Part 1: "Protocol specification [ITU-T Recommendations Q.2965.1 (1999) and Q.2965.2 (1999), modified]"; Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification
[ITU-T Recommendations Q.2965.1B and Q.2965.2B modified]"; Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user"; Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user"; Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network"; Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network". To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a given protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS). The Protocol specification, part 1 of the present document, extends the basic call control procedures defined in EN 300 443-1 [7] by supporting the connection characteristics (Quality of Service class, End-to-end transit delay) indication.
National transposition dates Date of adoption of this EN: 12 July 2002 Date of latest announcement of this EN (doa): 31 October 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2003 Date of withdrawal of any conflicting National Standard (dow): 30 April 2003
ETSI ETSI EN 301 815-2 V1.1.1 (2002-07) 5 Endorsement notice The elements of ITU-T Recommendation Q.2965.1B (2000) and ITU-T Recommendation Q.2965.2B (2000) apply, with the following modifications. Modifications to ITU-T Recommendation Q.2965.1B Clause 1 (Scope) Replace the text with: The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No. two (DSS2) protocol specification for support of Quality of Service class and parameters indication at call/connection establishment defined in EN 301 815-1 [9] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [6] and ETS 300 406 [10]. The supplier of a protocol implementation which is claimed to conform to EN 301 815-1 [9] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify the supplier and the implementation. Further ENs (or further parts of the present document) provide the method of testing and detailed application specific requirements to determine conformance to the present document. The provision of this capability requires the support of the protocol for the basic point-to-point call/bearer connections as defined in EN 300 443-1 [7] or of the protocol for the point-to-multipoint call/bearer connections as defined in EN 300 771-1 [8]. Clause 2 (Normative references), first paragraph Replace the first paragraph with: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Clause 2, end Add the following references at the end of clause 2: [7] ETSI EN 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 1: Protocol specification [ITU-T Recommendation Q.2931 (1995), modified]". [8] ETSI EN 300 771-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for point-to-multipoint call/bearer control; Part 1: Protocol specification [ITU-T Recommendation Q.2971 (1995), modified]". [9] ETSI EN 301 815-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service Class and Parameters indication at call/connection establishment; Part 1: Protocol specification [ITU-T Recommendations Q.2965.1 (1999) and Q.2965.2 (1999), modified]". SIST EN 301 815-2 V1.1.1:2005

ETSI ETSI EN 301 815-2 V1.1.1 (2002-07) 6 [10] ETSI ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology". Throughout the text of ITU-T Recommendation Q.2965.1B Replace references as shown in the following table. Reference in ITU-T Recommendation Q.2965.1B Modified reference ITU-T Recommendation Q.2931 [2] ITU-T Recommendation Q.2931 as modified by EN 3
...