SIST EN 14295:2004
(Main)Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
This standard specifies requirements for classification of electrode-flux combinations and all-weld metal in the as welded or stress relieved condition for submerged arc welding of steels with a minimum yield strength higher than 500 MPa. One flux may be classified with different electrodes. The wire electrode is also classified separately based on its chemical composition.
Schweißzusätze - Draht- und Fülldrahtelektroden und Drahtpulver-Kombinationen für das Unterpulverschweißen von hochfesten Stählen - Einteilung
Diese Norm legt Anforderungen für die Einteilung von Draht-/Fülldrahtpulver-Kombinationen sowie von reinem Schweißgut im Schweißzustand oder nach Spannungsarmglühen für das Unterpulverschweißen von Stählen mit einer Mindeststreckgrenze über 500 MPa fest. Ein Pulver kann mit verschiedenen Draht-/Fülldrahtelektroden eingestuft werden. Die Drahtelektrode kann auch gesondert nach ihrer chemischen Zusammensetzung eingeteilt werden.
Produits consommables pour le soudage - Fils-électrodes pleins et fils-électrodes fourrés et couples fils-flux pour le soudage sous flux des aciers a haute résistance - Classification
La présente norme spécifie les exigences relatives à la classification des couples fils-flux et du métal fondu hors dilution en soudage à l'arc sous flux pour l'état brut de soudage ou pour le traitement thermique de relaxation de contraintes des aciers à haute résistance ayant une limite d'élasticité minimale supérieure à 500 MPa. Un flux peut être classifié avec différents fils-électrodes. Le fil-électrode est également classifié séparément d'après sa composition chimique.
Dodajni materiali za varjenje - Žice in strženske žice in kombinacije žic in praškov za obločno varjenje visokotrdnostnih jekel po EPP - Razvrstitev
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schweißzusätze - Draht- und Fülldrahtelektroden und Drahtpulver-Kombinationen für das Unterpulverschweißen von hochfesten Stählen - EinteilungProduits consommables pour le soudage - Fils-électrodes pleins et fils-électrodes fourrés et couples fils-flux pour le soudage sous flux des aciers a haute résistance - ClassificationWelding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 14295:2003SIST EN 14295:2004en01-junij-2004SIST EN 14295:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14295November 2003ICS 25.160.20English versionWelding consumables - Wire and tubular cored electrodes andelectrode-flux combinations for submerged arc welding of highstrength steels - ClassificationProduits consommables pour le soudage - Fils-électrodespleins et fils-électrodes fourrés et couples fils-flux pour lesoudage sous flux des aciers à haute résistance -ClassificationSchweißzusätze - Draht- und Fülldrahtelektroden undDrahtpulver-Kombinationen für das Unterpulverschweißenvon hochfesten Stählen - EinteilungThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14295:2003 ESIST EN 14295:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.