SIST EN ISO 15708-4:2025

SLOVENSKI STANDARD
01-oktober-2025
Neporušitvene preiskave - Sevalne metode za računalniško tomografijo - 4. del:
Usposobljenost (ISO 15708-4:2025)
Non-destructive testing - Radiation methods for computed tomography - Part 4:
Qualification (ISO 15708-4:2025)
Zerstörungsfreie Prüfung - Durchstrahlungsverfahren für Computertomographie - Teil 4:
Qualifizierung (ISO 15708-4:2025)
Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée -
Partie 4: Qualification (ISO 15708-4:2025)
Ta slovenski standard je istoveten z: EN ISO 15708-4:2025
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15708-4
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2025
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN ISO 15708-4:2019
English Version
Non-destructive testing - Radiation methods for computed
tomography - Part 4: Qualification (ISO 15708-4:2025)
Essais non destructifs - Méthodes par rayonnements Zerstörungsfreie Prüfung - Durchstrahlungsverfahren
pour la tomographie informatisée - Partie 4: für Computertomographie - Teil 4: Qualifizierung (ISO
Qualification (ISO 15708-4:2025) 15708-4:2025)
This European Standard was approved by CEN on 3 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15708-4:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15708-4:2025) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing " in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2025, and conflicting national standards
shall be withdrawn at the latest by December 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15708-4:2019.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 15708-4:2025 has been approved by CEN as EN ISO 15708-4:2025 without any
modification.
International
Standard
ISO 15708-4
Second edition
Non-destructive testing —
2025-06
Radiation methods for computed
tomography —
Part 4:
Qualification
Essais non destructifs — Méthodes par rayonnements pour la
tomographie informatisée —
Partie 4: Qualification
Reference number
ISO 15708-4:2025(en) © ISO 2025

ISO 15708-4:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 15708-4:2025(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Qualification of the testing . 1
4.1 General .1
4.2 Qualification of defect testing .2
4.2.1 General .2
4.2.2 Objects and features .2
4.2.3 Feature detectability/test system/system parameterisation .2
4.2.4 Verification of suitability .3
4.2.5 Consistency check .3
4.2.6 Documentation.4
4.3 Qualification of dimensional testing .4
4.3.1 General .4
4.3.2 Test and measurement task .4
4.3.3 Dimensional testing/test system/system parameterisation .4
4.3.4 Degree of accuracy .5
4.3.5 Consistency check .5
4.3.6 Documentation.5
5 Qualification of the CT system . 6
5.1 General .6
5.2 Integral overall system verification .6
5.3 Checking the system components .6
5.3.1 General .6
5.3.2 Manipulation system .6
5.3.3 Image scale .6
5.3.4 Beam axis perpendicularity .6
5.3.5 Tube focal spot . . .6
5.3.6 Tube stability .7
5.3.7 Detector .7
5.3.8 Reconstruction . . .7
5.3.9 Visualization .7
5.4 Documentation .7
6 Example of CT system resolution evaluation methods . 7
6.1 General .7
6.2 Acquisition parameters .8
6.3 Recommendations for creating reference objects .8
6.4 Density resolution measurement method .8
6.4.1 General .8
6.4.2 High energy reference object .9
6.4.3 Low energy reference object .9
6.4.4 Experimental measurements .9

iii
...