oSIST prEN 304 632 V1.0.0:2026

SLOVENSKI STANDARD
01-september-2026
Kibernetska varnost (CYBER) - CRA - Zahteve za kibernetsko varnost za izdelke za
pametne domove z varnostnimi funkcijami - vključno s pametnimi ključavnicami,
varnostnimi kamerami, sistemi za spremljanje dojenčkov in alarmnimi sistemi
Cyber Security (CYBER) - CRA - Cybersecurity requirements for smart home products
with security functionalities - including smart door locks, security cameras, baby
monitoring systems and alarm systems
Ta slovenski standard je istoveten z: ETSI EN 304 632 V1.0.0 (2026-07)
ICS:
35.030 Informacijska varnost IT Security
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Draft ETSI EN 304 632 V1.0.0 (2026-07)

HARMONISED EUROPEAN STANDARD
Cyber Security (CYBER);
CRA;
Cybersecurity requirements for smart home products with
security functionalities;
including smart door locks, security cameras, baby monitoring
systems and alarm systems
2 Draft ETSI EN 304 632 V1.0.0 (2026-07)

Reference
DEN/CYBER-EUS-0014
Keywords
CRA, cybersecurity, intelligent homes & buildings

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorisation of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part of this document may be reproduced in any form, by any means and in any media, without the prior written
authorisation of ETSI and except as expressly permitted below.
By way of exception and when the document is a normative deliverable (European Standard (EN),
Technical Specification (TS), Group Specification (GS) or ETSI Standard (ES)), ETSI authorises to reproduce
and incorporate into products, services and technical documentation only those extracts (e.g. templates) that are strictly
necessary for the technical implementation of the normative deliverable, to ensure compliance with the latter.
Nothing in this notice shall be construed as limiting any mandatory exceptions to copyright provided by applicable law.

© ETSI 2026.
All rights reserved.
ETSI
3 Draft ETSI EN 304 632 V1.0.0 (2026-07)
Contents
Intellectual Property Rights . 10
Foreword. 10
Modal verbs terminology . 11
Introduction . 11
1 Scope . 12
2 References . 12
2.1 Normative references . 12
2.2 Informative references . 12
3 Definition of terms, symbols and abbreviations . 15
3.1 Terms . 15
3.1.1 Architecture related terms . 15
3.1.2 Asset categories . 15
3.1.3 Communication types . 16
3.1.4 Data assets . 16
3.1.5 Data related terms . 18
3.1.6 Function assets . 19
3.1.7 Function related terms . 20
3.1.8 Interface . 24
3.1.9 Operational environments . 25
3.1.10 Use cases . 25
3.1.11 Users. 26
3.2 Symbols . 26
3.3 Abbreviations . 26
4 Product context . 28
4.1 Product functions . 28
4.1.1 Function assets . 28
4.1.2 Data assets . 29
4.2 Product architecture . 30
4.3 Operational environment . 31
4.3.1 General description . 31
4.3.2 Physical/Hardware environment . 31
4.3.3 Logical/Software environment . 32
4.3.4 Connectivity aspects . 32
4.4 Distribution of security functions . 32
4.5 Users . 33
4.6 Use cases . 33
4.6.1 General . 33
4.6.2 Specific use cases . 33
5 Technical requirements for products . 33
5.1 Introduction - Applicability of the requirements . 33
5.2 Appropriate level of cybersecurity . 34
5.2.0 Introduction on appropriate level of cybersecurity requirements . 34
5.2.1 [USERNOT-NOSECFUC] User notifications on not available security functions . 34
5.2.2 [USERNOT-SECREL] Language and representation for security-related user notifications . 34
5.2.3 [GUI-SECCONF] Visual representation of security-related configuration via GUIs . 34
5.2.4 [BACKUP-TRANS] Data transfer mechanisms for loss sensitive data . 34
5.2.5 [BACKUP-AUTOTRANS] Automatic data transfer mechanisms for loss sensitive data . 34
5.2.6 [BACKUP-EXPORT] Data export mechanisms for loss sensitive data . 34
5.3 No known exploitable vulnerabilities . 35
5.3.0 Introduction on no known exploitable vulnerabilities . 35
5.3.1 [NKEV-MKAV] No known exploitable vulnerabilities . 35
5.3.2 [NKEV-INIT-UDP] Initial security update before or during first use . 35
5.4 Secure by default configuration . 35
ETSI
4 Draft ETSI EN 304 632 V1.0.0 (2026-07)
5.4.0 Introduction on secure by default configuration. 35
5.4.1 [SDC-AUM-FH] Default configuration of authentication for functions whose use can cause harm . 35
5.4.2 [SDC-SUM-AUTO] Default configuration of automated security updates . 35
5.4.3 [SDC-SUM-NOTIF] Default configuration of update notifications . 36
5.4.4 [SDC-FRM] Factory reset to restore the default state . 36
5.4.5 [SDC-MON-HANDLE] Handling of events by default . 36
5.4.6 [CRY-GENERAL] General requirements related to cryptography . 36
5.4.7 [CRY-CCK-PRE-LEN] Key size of preinstalled long term confidential cryptographic keys . 36
5.4.8 [CRY-CCK-GEN] Default key size of generated long term confidential cryptographic keys . 36
5.4.9 [CRY-PW-PRE-COM] Complexity of preinstalled passwords . 37
5.4.10 [CRY-PW-GEN-COM] Default complexity of generated passwords . 37
5.4.11 [CRY-PW-USR-COM] Recommended complexity of user chosen passwords . 37
5.5 Security updates . 37
5.5.0 Introduction on security updates . 37
5.5.1 [SU-SUPPORT] Secure software update mechanism . 37
5.5.2 [SU-PROVIDE] Secure software update mechanism for core components . 38
5.5.3 [SU-AUTO] Automated security updates . 38
5.5.4 [SU-DISABLE-AUTO] Option to disable automated security updates . 38
5.5.5 [SU-POSTPONE-AUTO] Option to postpone automated security updates. 38
5.5.6 [SU-NOTIF] Update notifications . 38
5.6 Authentication and access control . 39
5.6.0 Introduction on authentication and access control . 39
5.6.1 [ACM-FH] Access control for functions whose use can cause harm . 39
5.6.2 [AUM-FH] Authentication for functions whose use can cause harm . 39
5.6.3 [AUTHZ-LP] Least privilege in authorisation policies . 40
5.6.4 [AUTHZ-R] Revocability of granted permissions . 40
5.7 Confidentiality protection . 40
5.7.0 Introduction on confidentiality protection . 40
5.7.1 [CONF-SSM] Confidentiality protecting persistent storage for confidential data . 40
5.7.2 [CONF-COM] Communication of confidential data . 41
5.8 Integrity protection . 41
5.8.0 Introduction on integrity protection . 41
5.8.1 [INT-SSM] Integrity protecting persistent storage for integrity relevant data . 41
5.8.2 [INT-COM] Communication of integrity relevant data . 42
5.8.3 [INT-SWPCK] Software package verification . 42
5.9 Data minimisation . 43
5.9.0 Introduction on data minimisation . 43
5.9.1 [DMIN-DJST] Minimise processed data. 43
5.10 Availability protection . 43
5.10.0 Introduction on availability protection . 43
5.10.1 [AVAI-TIME-RECO-POW] Restoration after loss of power . 43
5.10.2 [AVAI-TIME-NETW] Local operation . 43
5.10.3 [AVAI-TIME-RECO-NETW] Restoration after loss of network connection . 43
5.10.4 [AVAI-TIME-OUTA-NOT] Notify non-availability . 44
5.10.5 [AVAI-TIME-PREV-NOT] Notify upcoming limitation . 44
5.10.6 [AVAI-TIME-NET-PRIO] Network prioritization . 44
5.10.7 [AVAI-TIME-RES-PRIO] Power resource prioritization . 44
5.10.8 [AVAI-TIME-DOS-RATE] Incoming rate limiting . 44
5.10.9 [AVAI-SUM-SCHEDULE] Scheduling of updates . 44
5.11 Non-interference . 45
5.11.0 Introduction on non-interference . 45
5.11.1 [NOINF-AMP] Amplification control . 45
5.12 Attack surface minimisation . 45
5.12.0 Introduction on attack surface minimisation . 45
5.12.1 [LAS-INVAL] Validation of external data input . 45
5.12.2 [LAS-INSAN] Sanitisation of external data input . 45
5.12.3 [LAS-PHY-INF] Only necessary physical interfaces . 46
5.12.4 [LAS-LOGIC-INF] Only necessary logical interfaces active by default . 46
5.12.5 [LAS-APP] Only necessary apps by default . 46
5.12.6 [LAS-SBOOT] Secure boot . 46
5.13 Exploit mitigation . 46
5.13.0 Introduction on exploit mitigation . 46
ETSI
5 Draft ETSI EN 304 632 V1.0.0 (2026-07)
5.13.1 [PRIV-DATA-HIGH] Privileged access on impact class high data assets . 46
5.13.2 [PRIV-FUNC-HIGH] Privileged access on impact class high function assets . 46
5.14 Monitoring . 47
5.14.0 Introduction on monitoring . 47
5.14.1 [MON-LOW] Events to log for low risk SHPSF . 47
5.14.2 [MON-MEDIUM] Events to log for medium risk SHPSF . 47
5.14.3 [MON-HIGH] Events to log for high risk SHPSF . 47
5.14.4 [MON-HANDLE] Handling of events . 48
5.14.5 [LOG-TIME] Timestamps for logs . 48
5.14.6 [LOG-TIME-HIGH] Real-time timestamps for logs . 48
5.14.7 [LOG-STORE-MEDIUM] Logfile persistence for medium risk SHPSF . 48
5.14.8 [LOG-STORE-HIGH] Logfile persistence for high risk SHPSF . 48
5.14.9 [LOG-CONFIG] Configuration of logging mechanisms . 49
5.15 Factory reset and data portability . 49
5.15.0 Introduction on factory reset and data portability . 49
5.15.1 [DLM-PERM] Permanent removal of user-related data . 49
6 Assessment criteria for compliance with technical requirements . 49
6.1 General . 49
6.2 Appropriate level of cybersecurity . 51
6.2.1 Assessment criteria for [USERNOT-NOSECFUC] . 51
6.2.2 Assessment criteria for [USERNOT-SECREL] . 51
6.2.3 Assessment criteria for [GUI-SECCONF] . 52
6.2.4 Assessment criteria for [BACKUP-TRANS] . 54
6.2.5 Assessment criteria for [BACKUP-AUTOTRANS] . 55
6.2.6 Assessment criteria for [BACKUP-EXPORT]. 56
6.3 No known exploitable vulnerabilities . 57
6.3.1 Assessment criteria for [NKEV-MKAV] . 57
6.3.2 Assessment criteria for [NKEV-INIT-UDP] . 59
6.4 Secure by default configuration . 60
6.4.1 Assessment criteria for [SDC-AUM-FH] . 60
6.4.2 Assessment criteria for [SDC-SUM-AUTO] . 61
6.4.3 Assessment criteria for [SDC-SUM-NOTIF] . 62
6.4.4 Assessment criteria for [SDC-FRM] . 63
6.4.5 Assessment criteria for [SDC-MON-HANDLE] . 64
6.4.6 Assessment criteria for [CRY-GENERAL] . 65
6.4.7 Assessment criteria for [CRY-CCK-PRE-LEN] . 66
6.4.8 Assessment criteria for [CRY-CCK-GEN] . 66
6.4.9 Assessment criteria for [CRY-PW-PRE-COM] . 67
6.4.10 Assessment criteria for [CRY-PW-GEN-COM] . 68
6.4.11 Assessment criteria for [CRY-PW-USR-COM]. 69
6.5 Security updates . 71
6.5.1 Assessment criteria for [SU-SUPPORT]. 71
6.5.2 Assessment criteria for [SU-PROVIDE] . 72
6.5.3 Assessment criteria for [SU-AUTO] . 73
6.5.4 Assessment criteria for [SU-DISABLE-AUTO] . 74
6.5.5 Assessment criteria for [SU-POSTPONE-AUTO]. 75
6.5.6 Assessment criteria for [SU-NOTIF] . 76
6.6 Authentication and access control . 77
6.6.1 Assessment criteria for [ACM-FH] . 77
6.6.2 Assessment criteria for [AUM-FH] . 79
6.6.3 Assessment criteria for [AUTHZ-LP] . 80
6.6.4 Assessment criteria for [AUTHZ-R] . 81
6.7 Confidentiality protection . 82
6.7.1 Assessment criteria for [CONF-SSM] . 82
6.7.2 Assessment criteria for [CONF-COM] . 83
6.8 Integrity protection . 84
6.8.1 Assessment criteria for [INT-SSM] . 84
6.8.2 Assessment criteria for [INT-COM] . 86
6.8.3 Assessment criteria for [INT-SWPCK] . 87
6.9 Data minimisation . 88
6.9.1 Assessment criteria for [DMIN-DJST] . 88
ETSI
6 Draft ETSI EN 304 632 V1.0.0 (2026-07)
6.10 Availability protection . 89
6.10.1 Assessment criteria for [AVAI-TIME-RECO-POW] . 89
6.10.2 Assessment criteria for [AVAI-TIME-NETW] . 91
6.10.3 Assessment criteria for [AVAI-TIME-RECO-NETW] . 92
6.10.4 Assessment criteria for [AVAI-TIME-OUTA-NOT] . 94
6.10.5 Assessment criteria for [AVAI-TIME-PREV-NOT] . 95
6.10.6 Assessment criteria for [AVAI-TIME-NET-PRIO] . 97
6.10.7 Assessment criteria for [AVAI-TIME-RES-PRIO] . 98
6.10.8 Assessment criteria for [AVAI-TIME-DOS-RATE] . 99
6.10.9 Assessment criteria for [AVAI-SUM-SCHEDULE] . 100
6.11 Non-interference . 101
6.11.1 Assessment criteria for [NOINF-AMP] . 101
6.12 Attack surface minimisation . 102
6.12.1 Assessment criteria for [LAS-INVAL] . 102
6.12.2 Assessment criteria for [LAS-INSAN] . 103
6.12.3 Assessment criteria for [LAS-PHY-INF] . 104
6.12.4 Assessment criteria for [LAS-LOGIC-INF] . 105
6.12.5 Assessment criteria for [LAS-APP] . 106
6.12.6 Assessment criteria for [LAS-SBOOT]. 107
6.13 Exploit mitigation . 108
6.13.1 Assessment criteria for [PRIV-DATA-HIGH] . 108
6.13.2 Assessment criteria for [PRIV-FUNC-HIGH] . 109
6.14 Monitoring . 110
6.14.1 Assessment criteria for [MON-LOW] . 110
6.14.2 Assessment criteria for [MON-MEDIUM] . 111
6.14.3 Assessment criteria for [MON-HIGH] . 112
6.14.4 Assessment criteria for [MON-HANDLE] . 113
6.14.5 Assessment criteria for [LOG-TIME] . 114
6.14.6 Assessment criteria for [LOG-TIME-HIGH] . 115
6.14.7 Assessment criteria for [LOG-STORE-MEDIUM] . 116
6.14.8 Assessment criteria for [LOG-STORE-HIGH] . 117
6.14.9 Assessment criteria for [LOG-CONFIG] . 118
6.15 Factory reset and data portability . 119
6.15.1 Assessment criteria for [DLM-PERM] . 119
Annex A (informative): Relationship between the present document and the essential
cybersecurity requirements of EU Regulation 2024/2847 . 122
Annex B (informative): Security analysis. 127
B.1 General . 127
B.2 Assets . 127
B.3 Risk factors . 127
B.4 Assumptions . 127
B.5 Threats . 128
B.6 Relationship between the present document and the covered/not covered cybersecurity risks . 128
B.7 Guidance for determining impact classes . 132
B.7.1 General . 132
B.7.2 Confidential data . 132
B.7.3 Loss sensitive data . 133
B.7.4 Time sensitive function . 133
B.7.5 Integrity relevant data and integrity relevant function . 134
Annex C: Void . 135
Annex D (normative): Relationship between specific data and functions assets covered by
the present document to impact classes for generic asset categories . 136
D.1 Data assets . 136
ETSI
7 Draft ETSI EN 304 632 V1.0.0 (2026-07)
D.2 Function assets . 142
Annex E (normative): Protection measures . 149
E.1 Authentication mechanism strength . 149
E.1.1 [AUM-FH] Authentication for functions whose use can cause harm . 149
E.1.1.1 General . 149
E.1.1.2 [AUM-E-I-Basic] AUTH.Basic inherence based SFA . 149
E.1.1.3 [AUM-E-K-Basic] AUTH.Basic knowledge based SFA . 149
E.1.1.4 [AUM-E-I-Normal] AUTH.Normal inherence based SFA . 149
E.1.1.5 [AUM-E-K-Normal] AUTH.Normal knowledge based SFA . 149
E.1.1.6 [AUM-E-P-Normal] AUTH.Normal possession based SFA . 149
E.1.1.7 [AUM-E-MFA-Normal] AUTH.Normal MFA . 150
E.1.1.8 [AUM-E-I-Enhanced] AUTH.Enhanced inherence based SFA . 150
E.1.1.9 [AUM-E-K-Enhanced] AUTH.Enhanced knowledge based SFA . 150
E.1.1.10 [AUM-E-P-Enhanced] AUTH.Enhanced possession based SFA . 150
E.1.1.11 [AUM-E-MFA-Enhanced] AUTH.Enhanced MFA . 151
E.1.1.12 [AUM-E-I-Strong] AUTH.Strong inherence based SFA . 151
E.1.1.13 [AUM-E-P-Strong] AUTH.Strong possession based SFA . 151
E.1.1.14 [AUM-E-MFA-Strong] AUTH.Strong MFA . 151
E.1.1.15 [AUM-E-Replay] AUTH.Normal, AUTH.Enhanced and AUTH.Strong replay protection . 151
E.1.1.16 [AUM-E-PitM] AUTH.Normal, AUTH.Enhanced and AUTH.Strong person in the middle
protection . 152
E.1.2 Assessment for [AUM-FH] authentication mechanism strength . 152
E.1.2.1 General . 152
E.1.2.2 Assessment criteria for [AUM-E-I-Basic] . 152
E.1.2.3 Assessment criteria for [AUM-E-K-Basic] . 153
E.1.2.4 Assessment criteria for [AUM-E-I-Normal] . 154
E.1.2.5 Assessment criteria for [AUM-E-K-Normal] . 155
E.1.2.6 Assessment criteria for [AUM-E-P-Normal] . 155
E.1.2.7 Assessment criteria for [AUM-E-MFA-Normal] . 157
E.1.2.8 Assessment criteria for [AUM-E-I-Enhanced] . 158
E.1.2.9 Assessment criteria for [AUM-E-K-Enhanced] . 159
E.1.2.10 Assessment criteria for [AUM-E-P-Enhanced] . 160
E.1.2.11 Assessment criteria for [AUM-E-MFA-Enhanced] . 162
E.1.2.12 Assessment criteria for [AUM-E-I-Strong] . 163
E.1.2.13 Assessment criteria for [AUM-E-P-Strong] . 164
E.1.2.14 Assessment criteria for [AUM-E-MFA-Strong]. 165
E.1.2.15 Assessment criteria for [AUM-E-Replay] . 166
E.1.2.16 Assessment criteria for [AUM-E-PitM] . 167
E.2 Integrity protection strength . 168
E.2.1 [INT-SSM] Integrity protecting persistent storage for integrity relevant data . 168
E.2.1.1 General . 168
E.2.1.2 [INT-SSM-E-Basic] INT.SSM.Basic integrity protecting secure storage me
...