SIST EN 61753-091-3:2005

SLOVENSKI SIST EN 61753-091-3:2005

STANDARD
november 2005
Izvedbeni standard za povezovalne naprave in pasivne komponente optičnih
vlaken – 091-3. del: Pigtailno oblikovani cirkulatorji enorodnih optičnih vlaken
za kategorijo U – Nekontrolirano okolje (IEC 61753-091-3:2004)
Fibre optic interconnecting devices and passive components performance
standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for
category U - Uncontrolled environment (IEC 61753-091-3:2004)
ICS 33.180.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61753-091-3
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2004

ICS 33.180.20
English version
Fibre optic interconnecting devices
and passive components performance standard
Part 091-3: Single mode fibre optic pigtailed style circulators
for category U –
Uncontrolled environment
(IEC 61753-091-3:2004)
Norme de qualité de fonctionnement  Lichtwellenleiter – Verbindungselemente
des dispositifs d'interconnexion et und passive Bauteile – Betriebsverhalten
composants passifs à fibres optiques Teil 091-3: Einmoden-Lichtwellenleiter-
Partie 091-3: Circulateurs à fibres Zirkulatoren mit Anschlussfasern
optiques monomodes raccordés für die Kategorie U –
à une fibre amorce pour catégorie U – Unkontrollierte Umgebung
Environnement non contrôlé (IEC 61753-091-3:2004)
(CEI 61753-091-3:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61753-091-3:2004 E

Foreword
The text of document 86B/1937/FDIS, future edition 1 of IEC 61753-091-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-091-3 on 2004-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-091-3:2004 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61753-091-3:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60793-1-1 - Optical fibres EN 60793-1-1 2003
Part 1-1: Measurement methods and test
procedures - General and guidance

1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures
Part 2-1: Tests - Vibration (sinusoidal)

1) 2)
IEC 61300-2-4 - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 1997

1) 2)
IEC 61300-2-5 - Part 2-5: Tests - Torsion/twist EN 61300-2-5 2002

1) 2)
IEC 61300-2-9 - Part 2-9: Tests - Shock EN 61300-2-9 1997

1) 2)
IEC 61300-2-14 - Part 2-14: Tests - Maximum input power EN 61300-2-14 1997

1) 2)
IEC 61300-2-17 - Part 2-17: Tests - Cold EN 61300-2-17 2003

1) 2)
IEC 61300-2-18 - Part 2-18: Tests - Dry heat - High EN 61300-2-18 1997
temperature endurance
1) 2)
IEC 61300-2-22 - Part 2-22: Tests - Change of temperature EN 61300-2-22 1997

1) 2)
IEC 61300-3-2 - Part 3-2: Examinations and EN 61300-3-2 1999
measurements - Polarization dependence
of attenuation in a single-mode fibre optic
device
1) 2)
IEC 61300-3-4 - Part 3-4: Examinations and EN 61300-3-4 2001
measurements - Attenuation
1) 2)
IEC 61300-3-5 - Part 3-5: Examinations and EN 61300-3-5 2001
measurements - Wavelength dependence
of attenuation
1) 2)
IEC 61300-3-6 - Part 3-6: Examinations and EN 61300-3-6 2003
measurements - Return loss
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
1)
IEC 61300-3-32 - Part 3-32: Examinations and - -
measurements - Polarisation mode
dispersion for passive optical components

1) 2)
IEC 61753-2-1 - Fibre optic interconnecting devices and EN 61753-2-1 2000
passive components performance
standard
Part 2-1: Fibre optic connectors
terminated on single-mode fibre for
category U - Uncontrolled environment

NORME CEI
INTERNATIONALE
IEC
61753-091-3
INTERNATIONAL
Première édition
STANDARD
First edition
2004-05
Norme de qualité de fonctionnement
des dispositifs d'interconnexion et
composants passifs à fibres optiques –
Partie 091-3:
Circulateurs à fibres optiques monomodes
raccordés à une fibre amorce pour catégorie U –
Environnement non contrôlé
Fibre optic interconnecting devices and
passive components performance standard –
Part 091-3:
Single mode fibre optic pigtailed style circulators
for category U – Uncontrolled environment

 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61753-091-3  IEC:2004 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references.9
3 Test.11
4 Test report.11
5 Performance requirements.11
5.1 Sample size, sequencing and grouping .11
5.2 Test details and requirements .13

Annex A (normative ) Sequencing and grouping of tests .25

Table 1 – Single-mode spectral bands .13
Table 2 – Test details and requirement.13
Table A.1 – Sequencing and grouping of tests .25

61753-091-3  IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 091-3: Single mode fibre optic pigtailed style circulators for
category U – Uncontrolled environment

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising with
the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-091-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics
The text of this standard is based on the following documents:
FDIS Report on voting
86B/1937/FDIS 86B/1965/RVD
Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.
61753-091-3  IEC:2004 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 61753 consists of the following parts, under the general title Fibre optic interconnecting
1)
devices and passive components performance standard:
Part 1-1: General and guidance – Interconnecting devices (connectors)
Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U –
Uncontrolled environment
Part 2-3: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective
branching devices for Category U – Uncontrolled environment
Part 021-2 Fibre optic connectors terminated on single-mode fibre to category C – Controlled
environment
Part 022-2: Fibre optic connectors terminated on multimode fibre for category C – Controlled
environment
Part 051-3: Single-mode fibre, plug-style fixed attenuators for Category U – Uncontrolled
environment
Part 052-3: Single-mode fibre, pigtailed-style fixed attenuators for category U – Uncontrolled
environment
Part 053-3: Continuously variable attenuatorsfor category U – Uncontrolled environment
Part 061-3: Single mode fibre optic pigtailed style isolators for category U – Uncontrolled
environment
Part 091-3: Single mode fibre optic pigtailed
...