SIST EN 300 220-4 V1.1.1:2017

Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU;
Metering devices operating in
designated band 169,400 MHz to 169,475 MHz

2 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)

Reference
DEN/ERM-TG28-538
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 All equipment conformance requirements . 8
4.2.0 Compliance . 8
4.2.1 Operating frequency . 9
4.2.1.0 Applicability. 9
4.2.1.1 Description . 9
4.2.1.2 Limits . 9
4.2.1.3 Conformance . 9
4.2.2 Unwanted emissions in the spurious domain . 9
4.2.2.0 Applicability. 9
4.2.2.1 Description . 9
4.2.2.2 Limits . 9
4.2.2.3 Conformance . 9
4.3 Transmitters conformance requirements . 9
4.3.1 Effective Radiated Power . 9
4.3.1.0 Applicability. 9
4.3.1.1 Description . 9
4.3.1.2 Limits . 9
4.3.1.3 Conformance . 10
4.3.2 Duty Cycle . 10
4.3.2.0 Applicability. 10
4.3.2.1 Description . 10
4.3.2.2 Limits . 10
4.3.2.3 Conformance . 10
4.3.3 Occupied Bandwidth. 10
4.3.3.0 Applicability. 10
4.3.3.1 Description . 10
4.3.3.2 Limits . 10
4.3.3.3 Conformance . 10
4.3.4 TX Out Of Band Emissions . 10
4.3.4.0 Applicability. 10
4.3.4.1 Description . 10
4.3.4.2 Limits . 11
4.3.4.3 Conformance . 11
4.3.5 Transient power . 11
4.3.5.0 Applicability. 11
4.3.5.1 Description . 11
4.3.5.2 Limits . 11
4.3.5.3 Conformance . 11
4.3.6 Adjacent Channel Power . 11
4.3.6.0 Applicability. 11
ETSI
4 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
4.3.6.1 Description . 11
4.3.6.2 Limits . 11
4.3.6.3 Conformance . 12
4.3.7 TX behaviour under Low Voltage Conditions . 12
4.3.7.0 Applicability. 12
4.3.7.1 Description . 12
4.3.7.2 Limits . 12
4.3.7.3 Conformance . 12
4.4 Receivers conformance requirements . 12
4.4.1 RX sensitivity . 12
4.4.1.0 Applicability. 12
4.4.1.1 Description . 12
4.4.1.2 Limits . 12
4.4.1.3 Conformance . 12
4.4.2 Blocking . 12
4.4.2.0 Applicability. 12
4.4.2.1 Description . 13
4.4.2.2 Limits . 13
4.4.2.3 Conformance . 13
4.4.3 Clear Channel Assessment threshold . 13
4.4.3.0 Applicability. 13
4.4.3.1 Description . 13
4.4.3.2 Limits . 13
4.4.3.3 Conformance . 13
4.4.4 Polite spectrum access timing parameters . 13
4.4.4.0 Applicability. 13
4.4.4.1 Description . 13
4.4.4.2 Limits . 13
4.4.4.3 Conformance . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 14
Annex B (normative): EU designated frequency bands for metering equipment . 15
Annex C (informative): Application form for testing . 16
C.0 Introduction . 16
C.1 Information as required by ETSI EN 300 220-4 . 16
Annex D (informative): Selection of technical parameters . 18
D.1 Introduction . 18
D.2 Other receiver parameters . 18
Annex E (informative): Bibliography . 19
Annex F (informative): Change History . 20
History . 21

ETSI
5 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
For non EU countries the present document may be used for regulatory (Type Approval) purposes.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Introduction
The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range
169,400 MHz to 169,475 MHz.
The present document is structured as follows:
• Clause 2 provides references.
• Clause 3 provides definitions of terms and abbreviations used.
• Clause 4 provides technical requirements.
• Annex A (informative): provides relationship between the present document and essential requirements of
Directive 2014/53/EU [i.1].
• Annex B (normative): EU designated frequency bands for metering equipment.
• Annex C (informative): Application form for testing.
• Annex D (informative): Selection of parameters.
• Annex E (informative): Bibliography.
• Annex F (informative): Change History.
ETSI
7 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
1 Scope
The present document specifies technical characteristics and methods of measurements for Metering Devices category
equipment types:
• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.2] as:
"The metering device category covers radio devices that are part of bidirectional radio communications
systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,
such as electricity, gas and water".
The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:
• stand-alone radio equipment;
•
...

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU;
Metering devices operating in
designated band 169,400 MHz to 169,475 MHz

2 ETSI EN 300 220-4 V1.1.1 (2017-02)

Reference
DEN/ERM-TG28-538
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 220-4 V1.1.1 (2017-02)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 All equipment conformance requirements . 8
4.2.0 Compliance . 8
4.2.1 Operating frequency . 9
4.2.1.0 Applicability. 9
4.2.1.1 Description . 9
4.2.1.2 Limits . 9
4.2.1.3 Conformance . 9
4.2.2 Unwanted emissions in the spurious domain . 9
4.2.2.0 Applicability. 9
4.2.2.1 Description . 9
4.2.2.2 Limits . 9
4.2.2.3 Conformance . 9
4.3 Transmitters conformance requirements . 9
4.3.1 Effective Radiated Power . 9
4.3.1.0 Applicability. 9
4.3.1.1 Description . 9
4.3.1.2 Limits . 9
4.3.1.3 Conformance . 10
4.3.2 Duty Cycle . 10
4.3.2.0 Applicability. 10
4.3.2.1 Description . 10
4.3.2.2 Limits . 10
4.3.2.3 Conformance . 10
4.3.3 Occupied Bandwidth. 10
4.3.3.0 Applicability. 10
4.3.3.1 Description . 10
4.3.3.2 Limits . 10
4.3.3.3 Conformance . 10
4.3.4 TX Out Of Band Emissions . 10
4.3.4.0 Applicability. 10
4.3.4.1 Description . 10
4.3.4.2 Limits . 11
4.3.4.3 Conformance . 11
4.3.5 Transient power . 11
4.3.5.0 Applicability. 11
4.3.5.1 Description . 11
4.3.5.2 Limits . 11
4.3.5.3 Conformance . 11
4.3.6 Adjacent Channel Power . 11
4.3.6.0 Applicability. 11
ETSI
4 ETSI EN 300 220-4 V1.1.1 (2017-02)
4.3.6.1 Description . 11
4.3.6.2 Limits . 11
4.3.6.3 Conformance . 12
4.3.7 TX behaviour under Low Voltage Conditions . 12
4.3.7.0 Applicability. 12
4.3.7.1 Description . 12
4.3.7.2 Limits . 12
4.3.7.3 Conformance . 12
4.4 Receivers conformance requirements . 12
4.4.1 RX sensitivity . 12
4.4.1.0 Applicability. 12
4.4.1.1 Description . 12
4.4.1.2 Limits . 12
4.4.1.3 Conformance . 12
4.4.2 Blocking . 12
4.4.2.0 Applicability. 12
4.4.2.1 Description . 13
4.4.2.2 Limits . 13
4.4.2.3 Conformance . 13
4.4.3 Clear Channel Assessment threshold . 13
4.4.3.0 Applicability. 13
4.4.3.1 Description . 13
4.4.3.2 Limits . 13
4.4.3.3 Conformance . 13
4.4.4 Polite spectrum access timing parameters . 13
4.4.4.0 Applicability. 13
4.4.4.1 Description . 13
4.4.4.2 Limits . 13
4.4.4.3 Conformance . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 14
Annex B (normative): EU designated frequency bands for metering equipment . 15
Annex C (informative): Application form for testing . 16
C.0 Introduction . 16
C.1 Information as required by ETSI EN 300 220-4 . 16
Annex D (informative): Selection of technical parameters . 18
D.1 Introduction . 18
D.2 Receiver parameters . 18
Annex E (informative): Bibliography . 19
Annex F (informative): Change History . 20
History . 21

ETSI
5 ETSI EN 300 220-4 V1.1.1 (2017-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
For non EU countries the present document may be used for regulatory (Type Approval) purposes.

National transposition dates
Date of adoption of this EN: 27 January 2017
Date of latest announcement of this EN (doa): 30 April 2017
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2017
Date of withdrawal of any conflicting National Standard (dow): 31 October 2018

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 ETSI EN 300 220-4 V1.1.1 (2017-02)
Introduction
The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range
169,400 MHz to 169,475 MHz.
The present document is structured as follows:
Clause 2 provides references.
Clause 3 provides definitions of terms and abbreviations used.
Clause 4 provides technical requirements.
Annex A (informative): provides relationship between the present document and essential requirements of Directive
2014/53/EU [i.1].
Annex B (normative): EU designated frequency bands for metering equipment.
Annex C (informative): Application form for testing.
Annex D (informative): Selection of parameters.
Annex E (informative): Bibliography.
Annex F (informative): Change History.
ETSI
7 ETSI EN 300 220-4 V1.1.1 (2017-02)
1 Scope
The present document specifies technical characteristics and methods of measurements for Metering Devices category
equipment types:
• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.2] as:
"The metering device category covers radio devices that are part of bidirectional radio communications
systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,
such as electricity, gas and water".
The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:
• stand-alone radio equipment;
• plug-in radio devices intended for use with or within a variety of host systems;
• plug-in radio devices intended for use within combin
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz - Part 4: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Metering devices operating in designated band 169,400 MHz to 169,475 MHz33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 300 220-4 V1.1.1 (2017-02)SIST EN 300 220-4 V1.1.1:2017en01-april-2017SIST EN 300 220-4 V1.1.1:2017SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 2
Reference DEN/ERM-TG28-538 Keywords harmonised standard, radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Modal verbs terminology . 5 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 8 3.3 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 All equipment conformance requirements . 8 4.2.0 Compliance . 8 4.2.1 Operating frequency . 9 4.2.1.0 Applicability. 9 4.2.1.1 Description . 9 4.2.1.2 Limits . 9 4.2.1.3 Conformance . 9 4.2.2 Unwanted emissions in the spurious domain . 9 4.2.2.0 Applicability. 9 4.2.2.1 Description . 9 4.2.2.2 Limits . 9 4.2.2.3 Conformance . 9 4.3 Transmitters conformance requirements . 9 4.3.1 Effective Radiated Power . 9 4.3.1.0 Applicability. 9 4.3.1.1 Description . 9 4.3.1.2 Limits . 9 4.3.1.3 Conformance . 10 4.3.2 Duty Cycle . 10 4.3.2.0 Applicability. 10 4.3.2.1 Description . 10 4.3.2.2 Limits . 10 4.3.2.3 Conformance . 10 4.3.3 Occupied Bandwidth. 10 4.3.3.0 Applicability. 10 4.3.3.1 Description . 10 4.3.3.2 Limits . 10 4.3.3.3 Conformance . 10 4.3.4 TX Out Of Band Emissions . 10 4.3.4.0 Applicability. 10 4.3.4.1 Description . 10 4.3.4.2 Limits . 11 4.3.4.3 Conformance . 11 4.3.5 Transient power . 11 4.3.5.0 Applicability. 11 4.3.5.1 Description . 11 4.3.5.2 Limits . 11 4.3.5.3 Conformance . 11 4.3.6 Adjacent Channel Power . 11 4.3.6.0 Applicability. 11 SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 4 4.3.6.1 Description . 11 4.3.6.2 Limits . 11 4.3.6.3 Conformance . 12 4.3.7 TX behaviour under Low Voltage Conditions . 12 4.3.7.0 Applicability. 12 4.3.7.1 Description . 12 4.3.7.2 Limits . 12 4.3.7.3 Conformance . 12 4.4 Receivers conformance requirements . 12 4.4.1 RX sensitivity . 12 4.4.1.0 Applicability. 12 4.4.1.1 Description . 12 4.4.1.2 Limits . 12 4.4.1.3 Conformance . 12 4.4.2 Blocking . 12 4.4.2.0 Applicability. 12 4.4.2.1 Description . 13 4.4.2.2 Limits . 13 4.4.2.3 Conformance . 13 4.4.3 Clear Channel Assessment threshold . 13 4.4.3.0 Applicability. 13 4.4.3.1 Description . 13 4.4.3.2 Limits . 13 4.4.3.3 Conformance . 13 4.4.4 Polite spectrum access timing parameters . 13 4.4.4.0 Applicability. 13 4.4.4.1 Description . 13 4.4.4.2 Limits . 13 4.4.4.3 Conformance . 13 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 14 Annex B (normative): EU designated frequency bands for metering equipment . 15 Annex C (informative): Application form for testing . 16 C.0 Introduction . 16 C.1 Information as required by ETSI EN 300 220-4 . 16 Annex D (informative): Selection of technical parameters . 18 D.1 Introduction . 18 D.2 Receiver parameters . 18 Annex E (informative): Bibliography . 19 Annex F (informative): Change History . 20 History . 21
ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1]. For non EU countries the present document may be used for regulatory (Type Approval) purposes.
National transposition dates Date of adoption of this EN: 27 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 6 Introduction The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range 169,400 MHz to 169,475 MHz. The present document is structured as follows: Clause 2 provides references. Clause 3 provides definitions of terms and abbreviations used. Clause 4 provides technical requirements. Annex A (informative): provides relationship between the present document and essential requirements of Directive 2014/53/EU [i.1]. Annex B (normative): EU designated frequency bands for metering equipment. Annex C (informative): Application form for testing. Annex D (informative): Selection of parameters. Annex E (informative): Bibliography. Annex F (informative): Change History. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 7 1 Scope The present document specifies technical characteristics and methods of measurements for Metering Devices category equipment types: • Met
...