SIST EN 301 002-3 V1.1.4:2005
(Main)Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
General Information
- Abstract
Test specification for RE/SPS-05141-1.
- Status
- Published
- Publication Date
- 30-Jun-2005
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jul-2005
- Due Date
- 01-Jul-2005
- Completion Date
- 01-Jul-2005
Overview
SIST EN 301 002-3 V1.1.4:2005 defines the Test Suite Structure and Test Purposes (TSS&TP) for the user side of the Integrated Services Digital Network (ISDN) using the Digital Subscriber Signalling System No. one (DSS1) protocol and Security tools (SET) procedures. This standard is an essential part of conformance testing for ISDN security services and supplementary service interactions at the user interface, ensuring interoperability and compliance with pan-European telecommunication requirements.
The document is part of a comprehensive standardization series addressing diverse aspects of ISDN security and signaling. Conformance to this standard enables reliable implementation, testing, and deployment of secure ISDN services across networks and devices.
Key Topics
Test Suite Structure (TSS):
The standard specifies the organization of test groups and cases, covering signalling procedures at S and T reference points for user access and interworking with private ISDNs.Test Purposes (TP):
- Definition and structure for each test requirement.
- Coverage includes registration and management of Personal Identification Numbers (PIN), notification of possible fraudulent use (using PIN or Transaction Number (TAN)), and response behavior for specific protocol states.
- Clear naming conventions and reference criteria, aligned with the implementation under test (IUT) and supported features.
Conformance Testing Methodology:
- Test purposes address externally observable behaviors associated with the DSS1 protocol, as required by EN 301 002-1.
- Emphasis on compliance with internationally recognized testing frameworks such as ISO/IEC 9646.
Selection and Execution Criteria:
- Guidance for including or excluding test cases depending on equipment configuration and PICS (Protocol Implementation Conformance Statement) options.
- All mandatory test purposes must be covered unless considered untestable by the chosen Abstract Test Method (ATM).
Applications
Practical applications of SIST EN 301 002-3 V1.1.4:2005 include:
ISDN Equipment Testing:
- Testing ISDN terminals and network components for conformity to security procedures and signaling requirements.
- Ensuring consistent and reliable handling of registration, PIN modification, and fraudulent use notifications at the user interface.
Product Certification:
- Providing a recognized framework for third-party certification of ISDN devices and services, helping vendors gain market acceptance and regulatory clearance.
Network Interoperability:
- Facilitating secure interworking between public and private ISDN networks.
- Supporting customer-specific security services with robust signaling validation.
Quality Assurance:
- Enabling manufacturers and operators to detect and resolve protocol implementation errors before deployment.
Key stakeholders for this standard include telecommunications equipment manufacturers, service providers, test laboratories, and regulatory authorities.
Related Standards
The strength of SIST EN 301 002-3 V1.1.4:2005 lies in its integration within a wider ISDN security and protocol testing framework. Related standards include:
- EN 301 002-1: Protocol specification for ISDN SET procedures with DSS1.
- EN 301 002-2: Protocol Implementation Conformance Statement (PICS) proforma specification.
- EN 301 002-4 and EN 301 002-6: Abstract Test Suite (ATS) and PIXIT proforma specifications for both user and network sides.
- EN 300 196-1: Generic functional protocol for supplementary services over DSS1.
- EN 301 132: Security tools for use within telecommunication services.
- ISO/IEC 9646 Series: Conformance testing methodology and framework for Open Systems Interconnection (OSI) protocols.
- ITU-T Recommendations I.411 and Q.931: ISDN user-network interfaces and signaling specifications.
Implementing SIST EN 301 002-3 V1.1.4:2005 ensures a globally recognized approach to ISDN security protocol conformance and enhances the quality and security of digital telecommunications services.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 002-3 V1.1.4:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user". This standard covers: Test specification for RE/SPS-05141-1.
Test specification for RE/SPS-05141-1.
SIST EN 301 002-3 V1.1.4:2005 is classified under the following ICS (International Classification for Standards) categories: 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 002-3 V1.1.4:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 3RVWRSNLYDURYDOQHJDRURGMD
6(7 3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW '66 GHO =JUDGED
SUHVNXãDOQHJDQL]DLQQDPHQLSUHVNXãDQMD 766 73 6SHFLILNDFLMD]DXSRUDEQLND
Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital
Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and
Test Purposes (TSS&TP) specification for the user
Ta slovenski standard je istoveten z: EN 301 002-3 Version 1.1.4
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Security tools (SET) procedures;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 3: Test Suite Structure and Test Purposes (TSS&TP)
specification for the user
2 ETSI EN 301 002-3 V1.1.4 (2000-05)
Reference
DEN/SPS-05141-3
Keywords
DSS1, ISDN, security, supplementary service,
TSS&TP, user
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
3 ETSI EN 301 002-3 V1.1.4 (2000-05)
Contents
Intellectual Property Rights.4
Foreword .4
1 Scope.5
2 References.5
3 Definitions and abbreviations .6
3.1 Definitions.6
3.1.1 Definitions related to conformance testing .6
3.1.2 Definitions related to EN 301 002-1.6
3.2 Abbreviations .7
4 Test Suite Structure (TSS) .7
5 Test Purposes (TP).7
5.1 Introduction .7
5.1.1 TP naming convention .7
5.1.2 Source of TP definition.8
5.1.3 TP structure.8
5.1.4 Test strategy.9
5.2 User TPs for SET .9
5.2.1 Signalling procedures at the coincident S and T reference point and for interworking with private
ISDN.9
5.2.1.1 Registration - PIN .9
5.2.1.2 Invocation and Operation.10
5.2.1.3 Notification of possible fraudulent use.10
5.2.1.3.1 PIN .10
5.2.1.3.2 TAN.11
6 Compliance .11
7 Requirements for a comprehensive testing service.11
Bibliography.12
History.13
ETSI
4 ETSI EN 301 002-3 V1.1.4 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 3 of a multi-part EN covering the Integrated Services Digital Network (ISDN); Security
tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol, as identified below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
National transposition dates
Date of adoption of this EN: 28 April 2000
Date of latest announcement of this EN (doa): 31 July 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2001
Date of withdrawal of any conflicting National Standard (dow): 31 January 2001
ETSI
5 ETSI EN 301 002-3 V1.1.4 (2000-05)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the User side of the T
reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [6]) of
implementations conforming to the stage three standard for the Security tools (SET) procedures for the pan-European
Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1)
protocol, EN 301 002-1 [1].
A further part of the present document specifies the Abstract Test Suite (ATS) and partial PIXIT proforma based on the
present document. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the
T reference point or coincident S and T reference point of implementations conforming to EN 301 002-1 [1].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 301 002-1: "Integrated Services Digital Network (ISDN); Security tools (SET)
procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
[2] ETSI EN 301 002-2: "Integrated Services Digital Network (ISDN); Security tools (SET)
procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol
Implementation Conformance Statement (PICS) proforma specification".
[3] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[4] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[5] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[6] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces – Reference
configurations".
[7] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[8] ITU-T Recommendation I.112 (1993): "Vocabulary of terms for ISDNs".
[9] ITU-T Recommendation E.164 (1997): "The international public telecommunication numbering
plan".
[10] ITU-T Recommendation I.210 (1993): "Principles of telecommunication services supported by an
ISDN and the means to describe them".
ETSI
6 ETSI EN 301 002-3 V1.1.4 (2000-05)
[11] ETSI ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[12] ETSI ETR 232: "Security Techniques Advisory Group (STAG); Glossary of security terminology".
[13] ETSI EN 301 132: "Integrated Services Digital Network (ISDN); Security tools (SET) for use
within telecommunication services".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply.
3.1.1 Definitions related to conformance testing
Abstract Test Suite (ATS): refer to ISO/IEC 9646-1 [3].
Implementation Under Test (IUT): refer to ISO/IEC 9646-1 [3].
Protocol Implementation Conformance Statement (PICS): refer to ISO/IEC 9646-1 [3].
PICS proforma: refer to ISO/IEC 9646-1 [3].
Protocol Implementation eXtra Information for Testing (PIXIT): refer to ISO/IEC 9646-1 [3].
PIXIT proforma: refer to ISO/IEC 9646-1 [3].
system under test: refer to ISO/IEC 9646-1 [3].
Test Purpose (TP): refer to ISO/IEC 9646-1 [3].
3.1.2 Definitions related to EN 301 002-1
component: see EN 300 196-1 [5], subclause 11.2.2.1.
Dummy call reference: see EN 300 403-1 [7], subclause 4.3.
Integrated Services Digital Network (ISDN): see ITU-T Recommendation I.112 [8], definition 308.
invoke component: see EN 300
...