SIST EN 301 070-3 V1.1.2:2005
(Main)Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification
General Information
- Abstract
TSS&TP for part 1
- Status
- Published
- Publication Date
- 31-Dec-2004
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2005
- Due Date
- 01-Jan-2005
- Completion Date
- 01-Jan-2005
- Mandate
- BC-T-338
Overview
SIST EN 301 070-3 V1.1.2:2005 is a Slovenian adoption of the European standard EN 301 070-3, published by the Slovenski inštitut za standardizacijo (SIST). This standard focuses on the Integrated Services Digital Network (ISDN) and specifically addresses conformance testing for Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 interworking with the Intelligent Network Application Part (INAP). The standard falls under the Telecommunications series and defines the Test Suite Structure and Test Purposes (TSS&TP) for validating ISUP v3 and INAP Capability Set 1 (CS1) interactions as described in Part 1 of the multi-part EN 301 070 series.
This document is essential for ensuring the reliable interoperability between exchange systems using ISUP and Smart Network (Intelligent Network) services supported via INAP, focusing on the specification and methodology for validation (conformance) testing.
Key Topics
- Test Suite Structure (TSS): Defines the hierarchical organization of test groups and cases aimed at verifying ISUP v3 and INAP CS1 protocol interactions.
- Test Purposes (TP): Documents specific objectives for each test, including mapping requirements for message parameters across ISUP and INAP.
- Abstract Test Methods (ATM): Describes the structured methodology for conformance testing, using an abstract system to decouple the test logic from specific hardware or software implementations.
- Implementation Under Test (IUT) and System Under Test (SUT): Specifies roles and configurations for protocol components (exchanges, call control and service switching functions) and how they are tested.
- Point of Control and Observation (PCO): Details where within the network the test stimuli are applied and where outcomes are verified.
- Test Configuration: Specifies recommended configurations to validate protocol and functional behavior across ISUP signaling links and INAP operations.
Applications
This standard is designed for use by:
- Telecommunications equipment vendors: To ensure ISDN switches and intelligent network components are fully interoperable and standards-compliant.
- Network operators and service providers: For validating that deployed infrastructure supports required end-to-end services across ISDN and intelligent network platforms.
- Testing laboratories and certification bodies: To structure and conduct standardized conformance testing programs for ISUP v3 and INAP CS1 protocols.
- Systems integrators and network engineers: Assisting in troubleshooting, verifying, and integrating multi-vendor networks where SS7, ISUP, and INAP interactions are critical.
The TSS&TP defined in SIST EN 301 070-3 enables:
- Detailed verification and validation of message mapping between ISUP and INAP - including parameters such as called/Calling Party Number, redirection information, and service indicators.
- Structured approach for both valid behavior and abnormal condition testing, improving network robustness and reliability.
- Support for evolving telecommunications architectures where open standards and conformance play a vital role in seamless service delivery.
Related Standards
For comprehensive ISDN and SS7 conformance testing, refer to:
- SIST EN 301 070-1: Protocol specification for ISUP v3 - INAP CS1 interactions (base protocol requirements).
- SIST EN 301 070-2: Protocol Implementation Conformance Statement (PICS) proforma specification.
- SIST EN 301 070-4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification.
- ITU-T Recommendation Q.1600: Base protocol for ISUP-INAP CS1 interworking.
- ISO/IEC 9646 series: General methodology for OSI conformance testing, including TTCN notation and implementation conformance statements.
Keywords: ISDN, Signalling System No.7, ISUP, INAP, conformance testing, TSS&TP, telecommunications standards, protocol interoperability, SS7, intelligent network, validation.
By applying SIST EN 301 070-3 V1.1.2:2005, organizations can achieve effective and standardized validation of critical telecommunication services and ensure robust service integration in advanced networks.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 070-3 V1.1.2:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification". This standard covers: TSS&TP for part 1
TSS&TP for part 1
SIST EN 301 070-3 V1.1.2:2005 is classified under the following ICS (International Classification for Standards) categories: 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 070-3 V1.1.2:2005 is associated with the following European legislation: Standardization Mandates: BC-T-338. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 301 070-3 V1.1.2:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 070-3 Version 1.1.2SIST EN 301 070-3 V1.1.2:2005en01-januar-2005SIST EN 301 070-3 V1.1.2:2005SLOVENSKI
STANDARD
ETSIEN301070-3V1.1.2(2000-11)EuropeanStandard(Telecommunicationsseries)IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version3interactionswiththeIntelligentNetworkApplicationPart(INAP);Part3:TestSuiteStructureandTestPurposes(TSS&TP)specificationSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)2ReferenceDEN/SPS-01044-3KeywordsINAP,ISDN,ISUP,TSS&TP,SS7ETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitionsandabbreviations.63.1Definitions.63.2Abbreviations.74Implementationundertestandtestmethods.84.1Identificationofthesystemandimplementationundertest.84.2ATMandtestingconfigurationforISUPv3.84.3INexchange.95TestSuiteStructure(TSS).116Testpurposes(TP).126.1Introduction.126.2Testpurpose(TP)namingconvention.126.2.1Sourceoftestpurposedefinition.136.2.2Testpurposestructure.136.3TestpurposesfortheISUP-INAPinteraction.136.3.1INAPbasiccall.136.3.1.1InitialDetectionPoint.136.3.1.2ConnectOperation.176.3.1.3OtherINAPbasiccallrelatedissues.226.3.2INcallwithSCPrequesttocollectfurtherdigits.246.3.3DetectionPointProcessing.246.3.4SetupofanINcalltodestinationB.276.3.4.1SuccessfulCallSetup.276.3.4.2Abnormalconditions.296.3.5Userinteractivedialogue(in-band).296.3.5.1SSPsupportsrequestedIPCapabilities.306.3.5.2Assistmethod-procedureintheinitiatingSSP.366.3.5.3Hand-offmethod-procedureintheinitiatingSSP.416.3.5.3.1BasicCallscenarios.416.3.5.4Assist/Hand-offmethod-procedureintheassistingSSP.416.3.5.4.1BasicCallscenarios.416.3.6Callgapping.426.3.7Servicefiltering.456.3.8SCPinitiatedcall.476.3.8.1Successfulcallset-up.477TestCoverage.48History.49SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart3ofamulti-partENcoveringtheinteractionsbetweenISDNUserPart(ISUP)version3andIntelligentNetworkApplicationPart(INAP)inthescopeofINCapabilitySet1(CS1),asidentifiedbelow:Part1:"Protocolspecification[ITU-RecommendationQ.1600(1997),modified]";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specification";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecification".NationaltranspositiondatesDateofadoptionofthisEN:27October2000DateoflatestannouncementofthisEN(doa):31January2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31July2001DateofwithdrawalofanyconflictingNationalStandard(dow):31July2001SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)51ScopeThepresentdocumentcontainsthevalidation(conformance)testspecificationfortheinteractionbetweenISUPv3andINAPCS1definedin[1].ThepresentdocumentappliesonlytoexchangeshavingimplementedtheISUPv3protocolspecificationinthecallcontrolfunction(CCF)andtheINAPCS1intheserviceswitchingfunction(SSF)oftheexchange.ItisapplicableforvalidationtestingofalltypesofexchangesasdefinedintheISUPv3protocolspecification.Thepresentdocumentdoesnotdealwithcompatibilitytesting.Themaintextpartofthepresentdocumentpresentstherequirementsregardingthechosentestmethod,conventionsusedwithintheATS,theTestSuiteStructureandTestPurposes(TSS&TP)fortheinteractionbetweenISUPv3andINAPCS1.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN301070-1(V1.2):"IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version3interactionswiththeIntelligentNetworkApplicationPart(INAP);Part1:Protocolspecification[ITU-TRecommendationQ.1600(1997),modified]".[2]ETSIEN300356-1:"IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version4fortheinternationalinterface;Part1:Basicservices[ITU-TRecommendationsQ.761toQ.764modified]".[3]ISO/IEC9646-1(1997):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:GeneralConcepts".[4]ISO/IEC9646-3(1992):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[5]ISO/IEC9646-7(1995):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".[6]ITU-TRecommendationQ.1214(1995):"DistributedfunctionalplaneforintelligentnetworkCS-1".[7]ITU-TRecommendationQ.1218(1995):"InterfaceRecommendationforintelligentnetworkCS-1".[8]ITU-TRecommendationE.164(1997):"Theinternationalpublictelecommunicationnumberingplan".[9]ITU-TRecommendationQ.701(1993):"Functionaldescriptionofthemessagetransferpart(MTP)ofSignallingSystemNo.7".[10]ITU-TRecommendationQ.702(1988):"Signallingdatalink".[11]ITU-TRecommendationQ.703(1996):"Signallinglink".[12]ITU-TRecommendationQ.704(1996):"Signallingnetworkfunctionsandmessages".SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)6[13]ITU-TRecommendationQ.705(1993):"Signallingnetworkstructure".[14]ITU-TRecommendationQ.706(1993):"Messagetransferpartsignallingperformance".[15]ITU-TRecommendationQ.707(1988):"Testingandmaintenance".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:-termsdefinedinISDNUserPart(ISUP)referencespecifications[1]and[2];-termsdefinedinISO/IEC9646-1[3],ISO/IEC9646-3[4]andinISO/IEC9646-7[5].Inparticular,thefollowingtermsanddefinitionsapply:AbstractTestCase(ATC):completeandindependentspecificationoftheactionsrequiredtoachieveaspecifictestpurpose,definedatthelevelofabstractionofaparticularAbstractTestMethod,startinginastabletestingstateandendinginastabletestingstate(seeISO/IEC9646-1[3],subclause3.3.3).AbstractTestMethod(ATM):descriptionofhowanIUTistobetested,givenatanappropriatelevelofabstractiontomakethedescriptionindependentofanyparticularrealizationofaMeansofTesting,butwithenoughdetailtoenableabstracttestcasestobespecifiedforthismethod(seeISO/IEC9646-1[3],subclause3.3.5).AbstractTestSuite(ATS):testsuitecomposedofabstracttestcases(seeISO/IEC9646-1[3],subclause3.3.6).ImplementationUnderTest(IUT):implementationofoneormoreOSIprotocolsinanadjacentuser/providerrelationship,beingpartofarealopensystemwhichistobestudiedbytesting(seeISO/IEC9646-1[3],subclause3.3.43).ISDNnumber:numberconformingtothenumberingandstructurespecifiedinITU-TRecommendationE.164[8].MeansofTesting(MOT):combinationofequipmentandproceduresthatcanperformthederivation,selection,parameterizationandexecutionoftestcases,inconformancewithareferencestandardizedATS,andcanproduceaconformancelog(seeISO/IEC9646-1[3],subclause3.3.54).PICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesthePICS.PIXITproforma:document,intheformofaquestionnaire,whichwhencompletedfortheIUTbecomesthePIXIT.PointofControlandObservation(PCO):pointwithinatestingenvironmentwheretheoccurrenceoftesteventsistobecontrolledandobserved,asdefinedinanAbstractTestMethod(seeISO/IEC9646-1[3],subclause3.3.64).Pre-testcondition:settingorstateintheIUTwhichcannotbeachievedbyprovidingstimulusfromthetestenvironment.ProtocolImplementationConformanceStatement(PICS):statementmadebythesupplierofaprotocolclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented(seeISO/IEC9646-1[3],subclauses3.3.39and3.3.80).ProtocolImplementationeXtraInformationforTesting(PIXIT):statementmadebyasupplierorimplementorofanIUT(protocol)whichcontainsorreferencesalloftheinformationrelatedtotheIUTanditstestingenvironment,whichwillenablethetestlaboratorytorunanappropriatetestsuiteagainsttheIUT(seeISO/IEC9646-1[3],subclauses3.3.41and3.3.81).SystemUnderTest(SUT):realopensysteminwhichtheIUTresides(seeISO/IEC9646-1[3],subclause3.3.103).SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)73.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ACONAbnormalCONditionsAM_ISSPAssistMethod-procedureintheInitiatingSSPASPAbstractServicePrimitiveA-SSPAssistingSignallingSwitchingPointATMAbstractTestMethodATSAbstractTestSuiteCCFCallControlFunctionCDCallDeflectionCGCallGappingCONCONnectoperationCS1INCapabilitySetNo1DPPDetectionPointProcessingHOM_ASSPHand-OffMethod–procedureintheAssistingSSPHOM_ISSPHand-OffMethod–procedureintheInitiatingSSPICSImplementationConformanceStatementIDPInitialDetectionPointoperationINAPIntelligentNetworkApplicationProtocolINBSetupofanINcalltodestinationBINBCINAPBasicCallINCDINcallwithSCPrequesttoCollectfurtherDigitsIPCSSPsupportsrequestedIPCapabilitiesISDNIntegratedServicesDigitalNetworkISSImpactonSupplementaryServicesI-SSPInitiatingSignallingSwitchingPointISUPISDNUserPartIUTImplementationUnderTestMOTMeansOfTestingMTPMessageTransferPartOINOtherINbasiccallrelatedissuesPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingSCP_ICSCPInitiatedCallSCSSuccessfulCallSetupSFServiceFilteringSPSignallingPointSSFServiceSwitchingFunctionSUTSystemUnderTestTPTestPurpose(contextdependent)TSS&TPTestSuiteStructureandTestPurposesTSSTestSuiteStructureTTCNTreeandTabularCombinedNotationUIDUserInteractiveDialogue(in-band)VValidbehaviourstimulusTheISUPmessageacronymscanbefoundintable2ofITU-TRecommendationQ.762asendorsedby[2].ThefollowingabbreviationsapplyforISUPparametersandparametervalues:AdSgAddressSignalsCgPNCallingPartyNumberGenNotGenericNotificationTMRTransmissionMediumRequirementUSIUserServiceIndicatorSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)84Implementationundertestandtestmethods4.1IdentificationofthesystemandimplementationundertestThesystemundertest(SUT)isanexchange.Theimplementationundertest(IUT)istheISUPv3implementationinthisexchange,mainlythepartresponsiblefortheinteractionbetweenISUPv3andINAPCS1whichtakesplaceintheCCFandSSF,asshowninfigure1.Thefollowingmainsubjectshavetobeconsideredinthisarea:a)detectionpointprocessingintheCCF;b)receiptofINAPCS1operationsintheSSF.INAPISUPISUPExchangeSSFCCFINAPCS1ISUPv3SUTIUTINAP-IntelligentNetworkApplicationProtocolCS1-CapatibilitySet1ISUP-ISDNUserPartIUT-ImplementationUnderTestSUT-SystemUnderTestSSF-ServiceSwitchingFunctionCCF-CallControlFunctionFigure1:SystemundertestTheISUPsignallingprotocolandtheINAPcanbeobservedontheSSNo.7linkonthenetworknodalinterface(NNI).OnthesignallinglinkspointingtotheCallControlFunction(CCF)theISDNUserPartprocedurescanbeobserved.ThesignallinglinkemergingformtheSSFtheINAPprocedurescanbeobserved.4.2ATMandtestingconfigurationforISUPv3TheAbstractTestMethod(ATM)chosenfortheInteractionbetweenISUPv3andINAPtestingspecificationisthedistributedmulti-partytestmethod.TheATMisdefinedatanappropriatelevelofabstractionsothatthetestcasesmaybespecifiedappropriately,withoutaddingrestrictionstotheimplementationundertest.TheATSiswritteninconcurrentTTCN.SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)94.3INexchangeTheconfigurationproposedfortestingexchangeshavinganSSF(INexchanges)isshowninfigure2/Q.ISIN_TEST.InordertotesttheprotocolandfunctionalityoftheseexchangesoneneedstoconsidertheincomingandoutgoingISUPcircuitsandthesignallinglinktotheSCP.TheIUTisobservedandcontrolledfromtwoISUPlinkswithassociatedcircuits.Thepointsofcontrolandobservation(PCO)arelabelledLACandCACononeside,andLADandCADontheother.ThenamingconventionforthesignallinglinkPCOis'L'followedbytwolettersindicatingtheinterface.SimilarlyforthecircuitPCO,thenameis'C'followedbythesametwolettersdesignatingtheinterface.TheLABPCOisusedbythelowertester(LT)tocontrolandobservetheINAPonthesignallingtotheSCP.TheLACandLADPCOsareusedbythelowertesters(LT)forcontrollingtheISUPsignallinglink,whereastheCACandCADPCOsareusedbythelowertestersforobservingcircuitrelatedevents,suchasconnectivity,DTMFtones,announcements,etc.TheISUPPDUstobesentandobservedontheLACandLADPCOssideallowforPDUconstraintstobespecifiedandcodeddowntothebit-level.ThesameappliesfortheINAPPDUsontheLABPCO.TheunderlyingnetworkserviceprovideristheMessageTransferPart(MTP)protocolasspecifiedinITU-TRecommendationsQ.701[9]toQ.707[15].Figure2/Q.ISIN_TESTshowstheactualusedconfigurationforINexchanges,withamaintestingcomponent(MTC),responsiblefortheABinterfaceandtwoslaveparalleltestingcomponents(PTCs),responsiblefortheACandADinterfaces.Thetestco-ordinationprocedures(TCP)allowforcommunicationbetweenthetesters.Thetestcomponentsaremostlyimplicitlyco-ordinated(asynchronously);theTCPsareonlyusedwhenitisnecessarytoobtaintheverdictfromtheparalleltestcomponent.Theleftandrightsideparalleltestcomponentsmaybeofanykind:theymaybeinternationalornationalISUP.SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)10NetworkserviceproviderCABLABTCPPTCCCFSPBMTCISUPsignalling,circuitsSSFSPAIUT-ImplementationUnderTestMTC-MainTestComponentPCO-PointofControlandObservationPTC-ParallelTestComponentSP-SignallingPointSSF-ServiceSwitchingFunctionCCF-CallControlFunctionLAB-PCOforsignallinglinkABCAB-CircuitPCOonABinterfaceLAC-PCOforsignallinglinkACCAC-CircuitPCOonACinterfaceLAD-PCOforsignallinglinkADCAD-CircuitPCOonADinterfaceTCP-TestCoordinationProceduresTCPNetworkserviceproviderISUPsignalling,circuitsPTCLACCACSPCINAPsignalling,circuitsSPDLADCADFigure2:ISUPmixedtestconfigurationforlocalexchangesSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)115TestSuiteStructure(TSS)ISUP_INAP_Interaction1INBC1IDP2CON3OIN2INCD3DPPForeachleaf:4INBV1SCS2ACON5UID1IPC2AM_ISSP3HOM_ISSP4HOM_ASSP6CG7SF8SCP_IC1SCSFigure3:TestsuitestructureTestSuiteStructure(TSS)namingconventionsare:INBCINAPBasicCallIDPInitialDetectionPointoperationCONCONnectoperationOINOtherINbasiccallrelatedissuesINCDINcallwithSCPrequesttoCollectfurtherDigitsDPPDetectionPointProcessingINBSetupofanINcalltodestinationBSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)12SCSSuccessfulCallSetupACONAbnormalCONditionsISSImpactonSupplementaryServicesUIDUserInteractiveDialogue(in-band)IPCSSPsupportsrequestedIPCapabilitiesAM_ISSPAssistMethod-procedureintheInitiatingSSPHOM_ISSPHand-OffMethod–procedureintheInitiatingSSPHOM_ASSPHand-OffMethod–procedureintheAssistingSSPCGCallGappingSFServiceFilteringSCP_ICSCPInitiatedCallVValidbehaviourstimulus6Testpurposes(TP)6.1IntroductionForeachtestrequirementaTestPurpose(TP)isdefined.6.2Testpurpose(TP)namingconventionTestPurposesarenumberedascendingwithineachgroup.GroupsareorganizedaccordingtotheTestSuiteStructure(TSS)downtothelastbutonelevel.TheclassificationintheV/IgroupsisdonebytheinclusionofVorIinthetestcasename.Additionalqualifiers,informoflowercaseletters,areaddedtoidentifyvariantswithinonegenerictestcase(seetable1).Table1:TPIdentifiernamingconventionschemeIdentifier:ISN____{}_{}ISN=ISUPINAPInteraction=Onecharacterrepresentingthetestgroup:V:ValidstimulusI:Inopportunestimulus=Sequencenumberinthetestsuitestructure=Sequencenumberusedwithinthegroup{}=Optionaladditionalnumberused{}=Optionallower-casecharacterdistinguishingtestswithsamereferencenumberSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)136.2.1SourceoftestpurposedefinitionThetestpurposescovervalidationtestingaspectsandweredevelopedwithinETSI.6.2.2TestpurposestructureThetestpurposestructureoverlapswiththeTestSuiteStructure(TSS).TestpurposesthattestnormalbehaviourhavebeengroupedintheV-validbehaviourgroup.TestpurposesthattesttheIUTbehaviourinsituationsthatarenotnormaloperationhavebeengroupedintheI-Inopportunestimulusgroup.6.3TestpurposesfortheISUP-INAPinteractionAllofthefollowingtestpurposesbelongtothemaingroupISUP_INAP_Interaction.Eachtestpurposeispresentedinaseparatetable.Thefirstrowofthetablecontainsthefollowingitems:TSSIdentifierinthetestsuitestructure(testgroup/subgroupidentifier)TPIdentifierofthetestpurposeReferenceITU-TRecommendationQ.1600ThereferencetotherequirementintheISUPINAPinteractionstandard,whichledtothetestpurpose.SelectionexpressionSelectioncriterionforthetestpurposetakingintoaccounttheexchange'sroleandtheanswerstothespecifiedPICSquestions(seeannexA/Q.isin_test).Ifthereisnoselectionexpressionspecified,theTPisvalidforallrolesofexchanges.ConfigurationThisisareferencetothetestconfigurationused.Thenextrowdefinesthetestpurposeitself,eachhavingatitleinitalicsandatextbody.TheISUPmessages,parameters,theINAPoperationsandinformationelementsarehighlightedboldtoeasethereadability.Inordertocheckthespecifiedbehaviourforsometestpurposes,aspecialprerequisitetestconditionhastobefulfilled.Ifsuchaconditionisneeded,itispresentedafterthetestpurposeundertheheading'Pre-testconditions'.6.3.1INAPbasiccall6.3.1.1InitialDetectionPointTSS/INBC/IDPTPISN_V_1_1_1ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecalledpartynumberToverifythattheIUTcansuccessfullymapthecalledpartynumberfromtheIAMtothecalledPartyNumberoftheInitialDPoperation.Pre-testconditions:ArmDP3(Analyzed_Information)SIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)14TSS/INBC/IDPTPISN_V_1_1_2ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingpartynumberToverifythattheIUTcansuccessfullymapthecallingpartynumberfromtheIAMtothecallingPartyNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_3ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingpartysub-addressToverifythattheIUTcansuccessfullymapthecallingpartynumberandthecallingpartysub-addresscontainedintheaccesstransportparameterfromtheIAMtothecallingPartyNumberandcallingPartySubaddressoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_4ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheadditionalcallingpartynumberinthegenericnumberToverifythattheIUTcansuccessfullymaptheadditionalcallingpartynumberinthegenericnumberfromtheIAMtotheadditionalCallingPartyNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_5ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingparty'scategoryToverifythattheIUTcansuccessfullymapthecallingparty'scategoryfromtheIAMtothecallingPartysCategoryoftheInitialDPoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)15TSS/INBC/IDPTPISN_V_1_1_6ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheforwardcallindicatorsToverifythattheIUTcansuccessfullymaptheforwardcallindicatorsfromtheIAMtotheforwardCallIndicatorsoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_7ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthelocationnumberToverifythattheIUTcansuccessfullymapthelocationnumberfromtheIAMtothelocationNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_8ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheoriginalcallednumberToverifythattheIUTcansuccessfullymaptheoriginalcallednumberfromtheIAMtotheoriginalCalledPartyIdoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_9ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectingnumberToverifythattheIUTcansuccessfullymaptheredirectingnumberfromtheIAMtotheredirectingPartyIdoftheInitialDPoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)16TSS/INBC/IDPTPISN_V_1_1_10ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectioninformationToverifythattheIUTcansuccessfullymaptheredirectioninformationfromtheIAMtotheredirectionInformationoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_11ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserteleserviceinformationToverifythattheIUTcansuccessfullymaptheuserteleserviceinformationfromtheIAMtothehighLayerCompatibilityoftheInitialDPoperation.Theuserteleserviceinformationcontainsthefirstpriorityhighlayercompatibilityinformationelement.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_12ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthepreferredhighlayercompatibilityfromtheaccesstransportparameterToverifythattheIUTcansuccessfullymapthehighlayercompatibilityinformationelementscontainedintheaccesstransportparameterfromtheIAMtothehighLayerCompatibilityoftheInitialDPoperation.TheuserteleserviceinformationparameterisnotcontainedintheIAM.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_13ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserserviceinformationprimeToverifythattheIUTcansuccessfullymaptheuserserviceinformationprimefromtheIAMtothebearerCapabilityoftheInitialDPoperation.Thisisthefirstprioritybearercapability,thesecondonebeingcontainedintheuserserviceinformationoftheIAM.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)17TSS/INBC/IDPTPISN_V_1_1_14ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserserviceinformationToverifythattheIUTcansuccessfullymaptheuserserviceinformationfromtheIAMtothebearerCapabilityoftheInitialDPoperation.TheuserserviceinformationprimeparameterisnotcontainedintheIAM.Pre-testconditions:None6.3.1.2ConnectOperationTSS/INBC/CONTPISN_V_1_2_1ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthedestinationRoutingAddressToverifythattheIUTcansuccessfullymapthedestinationRoutingAddressoftheConnectoperationtothecalledpartynumberoftheIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_2ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note2table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofonedestinationRoutingAddressoutofthreeToverifythattheIUTcansuccessfullymaponeofthreedestinationRoutingAddressinformationelementsoftheConnectoperationtothecalledpartynumberoftheIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_3ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note3table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthedestinationRoutingAddresswithcutAndPasteToverifythattheIUTcansuccessfullymapthedestinationRoutingAddresswiththecutAndPasteinformationelementoftheConnectoperationtothecalledpartynumberoftheIAMconformtosubclause3.3.16ofITU-TRecommendationQ.1218[7].Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)18TSS/INBC/CONTPISN_V_1_2_4ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note3table5/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1TestpurposeMappingofthedestinationRoutingAddresswithoutcutAndPasteToverifythat,ifthereisnocutAndPasteinformationelementintheConnectoperation,theIUTsendsanACMmessageinthebackwarddirectionwiththebackwardcallindicatorscodedasfollows:calledparty'sstatusindicator00(noindication)calledparty'scategory00(noindication)end-to-endmethodindicator00(noend-to-endmethodavailable)interworkingindicator0(nointerworkingencountered)end-to-endinformationindicator0(noend-to-endinformationavailable)ISDNUserPartindicator1(ISDNUserPartusedalltheway)ISDNaccessindicator1(terminatingaccessISDN)SCCPmethodindicator00(noindication)Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_2_5ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingPartysCategoryToverifythattheIUTcansuccessfullymapthecallingPartysCategoryoftheConnectoperationtothecallingparty'scategoryintheoutgoingIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_6ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobedivertedindicator(allowed)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththecalltobedivertedindicatorsetto‘calldiversionallowed’oftheConnectoperationtothecalldiversiontreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)19TSS/INBC/CONTPISN_V_1_2_7ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobedivertedindicator(notallowed)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththecalltobedivertedindicatorsetto‘calldiversionnotallowed’oftheConnectoperationtothecalldiversiontreatmentindicatorsparameteroftheIAMwiththecalltobedivertedindicatorsetto‘calldiversionnotallowed’.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_8ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1(double)TestpurposeMappingoftheserviceInteractionIndicators-Calltobeofferedindicator(notallowed)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththecalltobeofferedindicatorsetto‘callofferingnotallowed(default)’oftheConnectoperationtothecallofferingtreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_9ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobeofferedindicator(allowed)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththecalltobeofferedindicatorsetto'callofferingallowed'oftheConnectoperationtothecallofferingtreatmentindicatorsparameteroftheIAMwiththecalltobeofferedindicatorsetto'callofferingallowed'.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_10ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatDLEacceptanceindicator(accept)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththeConferenceatDLEacceptanceindicatorsetto‘acceptconferencerequest(default)’oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)20TSS/INBC/CONTPISN_V_1_2_11ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatDLEacceptanceindicator(reject)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatDLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheIAMintheforwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_12ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionPICSA.4/7Configuration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(accept)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'acceptconferencerequest(default)'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheACM/CON,,becausethecodinginthiscaseis‘noindication’.ThesendingoftheACM/CONinthebackwarddirectionispostponeduntiltheACMorCONisreceived.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_13ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(accept)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'acceptconferencerequest(default)'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANMinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'noindication'or'acceptconferencerequest'.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto‘acceptconferencerequest(default)’oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANM,becausethecodinginthiscaseis‘noindication’.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)21TSS/INBC/CONTPISN_V_1_2_14ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNotPICSA.4/7Configuration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(reject)TestpurposeToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheACM/CONinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.ThesendingoftheACM/CONinthebackwarddirectionispostponeduntiltheACMorCONisreceived.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_15ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(reject)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANMinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_16ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheoriginalCalledNumberToverifythattheIUTcansuccessfullymaptheoriginalCalledPartyIdoftheConnectoperationtotheoriginalcallednumberintheIAMmessage.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_17ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectingPartyIDToverifythattheIUTcansuccessfullymaptheredirectingPartyIdoftheConnectoperationtotheredirectingnumberintheIAMmessage.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)22TSS/INBC/CONTPISN_V_1_2_18ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectionInformationToverifythattheIUTcansuccessfullymaptheredirectionInformationoftheConnectoperationtotheredirectioninformationintheIAMmessage.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_19ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note5table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeNomappingoftheisdnAccessRelatedInformationToverifythattheIUTdoesnotmaptheisdnAccessRelatedInformationoftheConnectoperation,sothatthereceivedinformationintheaccesstransportparameteroftheIAM(calledpartysub-address,lowlayercompatibilityandhighlayercompatibility)ispassedonunchangedintheforwarddirectionintheoutgoingIAMmessage.Pre-testconditions:None6.3.1.3OtherINAPbasiccallrelatedissuesTSS/INBC/OINTPISN_V_1_3_1ReferenceITU-TRecommendationQ.16009.1.1.6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeContinuitycheckToverifythattheIUTdoesnotstartINAPoperationsuntiltheCOTmessageindicatingasuccessfulcontinuitycheckisreceived.TheIAMcontainstheindication'continuitycheckperformedonapreviouscircuit'inthenatureofconnectionindicators.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_2ReferenceITU-TRecommendationQ.16009.1.1.7/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeSegmentationToverifythattheIUTdoesnotstartINAPoperationsuntiltheSGMisreceived.TheIAMcontainsasimplesegmentationindicatorsetto'additionalinformationwillbesentinasegmentationmessage'intheoptionalforwardcallindicators.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)23TSS/INBC/OINTPISN_V_1_3_3ReferenceITU-TRecommendationQ.16009.1.4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeReleaseCalloperationwithreleaseCallArgToverifythattheIUTreleasesthecallinbothdirectionsuponreceiptofaReleaseCalloperationfromtheSCPwiththecausevalueinthecauseindicatorssettothereceivedreleaseCallArgvalue.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_4ReferenceITU-TRecommendationQ.16009.1.4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeReleaseCalloperationwithoutreleaseCallArgToverifythattheIUTreleasesthecallinbothdirectionsuponreceiptofaReleaseCalloperationwithoutreleaseCallArgfromtheSCPwiththecausevalueinthecauseindicatorssetto'#31-normalunspecified'.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_5ReferenceITU-TRecommendationQ.16009.1.5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeTransferofcalledINnumberToverifythattheIUTsendsthecalledpartynumberfromthereceivedIAMinthecalledINnumberoftheoutgoingIAM.TheaddresspresentationrestrictedindicatorofthecalledINnumberwillbesetaccordingtothecalledINnumberpresentationrestrictedindicatorintheserviceInteractionIndicatorsofthereceivedConnectoperation.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_6ReferenceITU-TRecommendationQ.16009.1.5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeTransferofcalledINnumberToverifythattheIUToverwritesintheoutgoingIAMthecalledINnumberfromthereceivedIAMwiththecalledpartynumberofthereceivedIAM.TheaddresspresentationrestrictedindicatorofthecalledINnumberwillbesetaccordingtothecalledINnumberpresentationrestrictedindicatorintheserviceInteractionIndicatorsofthereceivedConnectoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)246.3.2INcallwithSCPrequesttocollectfurtherdigitsTSS/INCDTPISN_V_2_1ReferenceITU-TRecommendationQ.16009.2/Q.1600asendorsedby[1]SelectionexpressionPICSA1/5Configuration1TestpurposeEventReportBCSMoperationToverifythattheIUTcanreplytoaRequestReportBCSMEventoperationtoarmDP2andaCollectInformationoperationfromtheSCPwithanEventReportBCSMoperation.ThecalledINnumberoftheoutgoingIAMshallcontaintheaddresssignaldigitsreceivedintheIAMandinthesubsequentnumberoftheSAMmessage.Pre-testconditions:NoneTSS/INCDTPISN_V_2_2ReferenceITU-TRecommendationQ.16009.2/Q.1600asendorsedby[1]SelectionexpressionPICSA1/6Configuration1TestpurposeCollectedInformationoperationToverifythattheIUTcanreplytoaRequestReportBCSMEventoperationtoarmDP2andaCollectInformationoperationwithanCollectedInformationoperation.ThecalledINnumberoftheoutgoingIAMshallcontaintheaddresssignaldigitsreceivedinthecalledpartynumberoftheIAMandinthesubsequentnumberoftheSAMmessage.Pre-testconditions:None6.3.3DetectionPointProcessingTSS/DPPTPISN_V_3_1ReferenceITU-TRecommendationQ.16009.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeExpiryoftimerTNoReplyToverifythattheIUTcaninformtheSCPoftheexpiryofthetimerTNoReplywithaEventReportBCSMoperationiftheSCPhasrequestedwithinaRequestReportBCSMEventoperationthearmingofDP6orDP14specifyingnotifyAndContinue.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005
ETSIETSIEN301070-3V1.1.2(2000-11)25TSS/DPPTPISN_V_3_2ReferenceITU-TRecommendationQ.16009.3.2.2/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeFallbackToverifythattheIUTcanperformfallbackifanIAMwithatransmissionmediumrequirementsetto'64kbit/sunrestrictedpreferred'isreceived.Pre-testconditions:NoneTSS/DPPTPISN_V_3_3ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1implicitToverifythattheIUTdiscardstheuser-to-userinformationreceivedintheIAMandsignalsintheuser-to-userindicatorsoftheACM'user-to-userinformationdiscardedbythenetwork'.TheoutgoingIAMwillnotcontainauser-to-userinformationparameter.Pre-testconditions:NoneTSS/DPPTPISN_V_3_4ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1explicitnon-essentialToverifythattheIUTdiscardsfromthereceivedIAMhavingtheuser-to-userindicatorswiththeService1fieldsetto‘request,non-essential’andsignalsintheService1fieldoftheuser-to-userindicatorsoftheACM‘notprovided’.TheoutgoingIAMwillnotcontainauser-to-userindicator/user-to-userinformationparameter.Pre-testconditions:NoneTSS/DPPTPISN_V_3_5ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1explicitess
...