SIST EN ISO 11125-5:2025

SLOVENSKI STANDARD
01-november-2025
Nadomešča:
SIST EN ISO 11125-5:2018
Priprava jeklenih podlag pred nanašanjem barv in sorodnih premazov - Preskusne
metode za kovinske granulate za peskanje - 5. del: Določanje odstotka
poškodovanih delcev in mikrostrukture (ISO 11125-5:2025)
Preparation of steel substrates before application of paints and related products - Test
methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage
defective particles and of microstructure (ISO 11125-5:2025)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für metallische Strahlmittel - Teil 5: Bestimmung des Anteils an defekten
Körnern und des Gefüges (ISO 11125-5:2025)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d’essai pour abrasifs métalliques destinés au décapage par
projection - Partie 5: Détermination du pourcentage de particules défectueuses et de la
microstructure (ISO 11125-5:2025)
Ta slovenski standard je istoveten z: EN ISO 11125-5:2025
ICS:
25.220.10 Priprava površine Surface preparation
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11125-5
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2025
EUROPÄISCHE NORM
ICS 25.220.10 Supersedes EN ISO 11125-5:2018
English Version
Preparation of steel substrates before application of paints
and related products - Test methods for metallic blast-
cleaning abrasives - Part 5: Determination of percentage
defective particles and of microstructure (ISO 11125-
5:2025)
Préparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen
peintures et de produits assimilés - Méthodes d'essai von Beschichtungsstoffen - Prüfverfahren für
pour abrasifs métalliques destinés au décapage par metallische Strahlmittel - Teil 5: Bestimmung des
projection - Partie 5: Détermination du pourcentage de Anteils an defekten Körnern und des Gefüges (ISO
particules défectueuses et de la microstructure (ISO 11125-5:2025)
11125-5:2025)
This European Standard was approved by CEN on 8 February 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11125-5:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 11125-5:2025) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2026, and conflicting national standards
shall be withdrawn at the latest by February 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11125-5:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 11125-5:2025 has been approved by CEN as EN ISO 11125-5:2025 without any
modification.
International
Standard
ISO 11125-5
Third edition
Preparation of steel substrates
2025-07
before application of paints and
related products — Test methods
for metallic blast-cleaning
abrasives —
Part 5:
Determination of percentage
defective particles and of
microstructure
Préparation des subjectiles d'acier avant application de peintures
et de produits assimilés — Méthodes d’essai pour abrasifs
métalliques destinés au décapage par projection —
Partie 5: Détermination du pourcentage de particules
défectueuses et de la microstructure
Reference number
ISO 11125-5:2025(en) © ISO 2025

ISO 11125-5:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 11125-5:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
5 Sampling . 1
6 Preparation of the sample . 2
7 Procedure . 2
7.1 Determination of cracks, voids and shrinkage .2
7.2 Determination of defectively shaped shot particles .2
7.3 Determination of defectively shaped grit particles .2
7.4 Determination of defectively shaped cylindrical particles .3
7.5 Determination of defectively shaped irregular particles .3
7.6 Determination of microstructure .3
8 Test report . 3
Bibliography
...