SIST EN 1870-5:2003
(Main)Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
This European Standard specifies the requirements and/or the measures to remove the hazards and limit the risk on circular sawbenches/up-cutting cross-cut sawing machines, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates.
This European Standard does not apply to :
- hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting;
- machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand.
This European Standard covers the hazards relevant to these machines as stated in clause 4.
For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards related to Electro-Magnetic Compatibility (EMC).
This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.
NOTE Circular sawbenches are dealt with in EN 1870-1:1999
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 5: Kombinierte Tischkreissägemaschinen/von unten schneidende Kappsägemaschinen
Diese Europäische Norm legt die Anforderungen und/oder Maßnahmen für die Beseitigung von Gefähr-dungen und zur Begrenzung der Risiken an kombinierten Tischkreissägemaschinen/von unten schneidenden Kappsägemaschinen fest, im folgenden als "Maschinen" bezeichnet, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten versehen und/oder Beschichtungen aus Kunststoff/Leichtmetall-Legierung haben.
Diese Europäische Norm gilt nicht für:
- handgeführte Holzbearbeitungsmaschinen einschließlich solcher Einrichtungen, die ihre Verwendung in einer anderen Weise z.B. in einer Stationäreinrichtung ermöglichen;
- Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von Hand von einer Person angehoben werden können.
Diese Europäische Norm behandelt die von der Maschine ausgehenden Gefährdungen, wie sie in Abschnitt 4 aufgelistet sind.
Diese Europäische Norm behandelt bei CNC-Maschinen nicht die Gefährdungen im Zusammenhang mit der elektromagnetischen Verträglichkeit (EMV).
Diese Europäische Norm ist in erster Linie auf Maschinen anzuwenden, die nach dem Datum der Herausgabe dieser Europäischen Norm hergestellt werden.
ANMERKUNG Tischkreissägemaschinen werden in EN 1870-1:1999 behandelt.
Sécurité des machines pour le travail du bois - Machines a scier circulaires - Partie 5: Scies circulaires combinées a table et a coupe transversale ascendante
La présente Norme européenne spécifie les prescriptions et/ou les mesures destinées à éliminer les phénomènes dangereux et limiter les risques sur les scies circulaires combinées à table et à coupe transversale ascendante (ci-après dénommées "machines"), conçues pour la coupe de bois massif, de panneaux de particules, et de fibres, de contre-plaqué, ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliage léger stratifié.
La présente Norme européenne ne s'applique pas aux :
- machines à bois portatives ou toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixées sur un établi;
- machines installée sur un établi ou une table similaire à un établi, destinées à exécuter des travaux dans une position fixe, pouvant être soulevées à la main par une personne.
La présente Norme européenne couvre les phénomènes dangereux applicables à ces machines dont une liste est donnée à l'article 4.
Pour les machines à commande numérique la présente Norme européenne ne traite pas des phénomènes dangereux liés à la compatibilité électromagnétique (CEM).
La présente Norme européenne est applicable avant tout aux machines fabriquées après la date de publication de la présente Norme européenne.
NOTE Les scies circulaires à table sont traitées dans l'EN 1870-1:1999
Varnost lesnoobdelovalnih strojev - Krožne žage - 5. del: Delovne mize za krožno žago/podmizni čelilniki in stroji za prečni prerez
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 5: Kombinierte Tischkreissägemaschinen/von unten schneidende KappsägemaschinenSécurité des machines pour le travail du bois - Machines a scier circulaires - Partie 5: Scies circulaires combinées a table et a coupe transversale ascendanteSafety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-5:2002SIST EN 1870-5:2003en01-september-2003SIST EN 1870-5:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1870-5April 2002ICS 79.120.10English versionSafety of woodworking machines - Circular sawing machines -Part 5: Circular sawbenches/up-cutting cross-cut sawingmachinesSécurité des machines pour le travail du bois - Machines àscier circulaires - Partie 5: Scies circulaires combinées àtable et à coupe transversale ascendanteSicherheit von Holzbearbeitungsmaschinen -Kreissägemaschinen - Teil 5: KombinierteTischkreissägemaschinen/von unten schneidendeKappsägemaschinenThis European Standard was approved by CEN on 8 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1870-5:2002 ESIST EN 1870-5:2003
Open frame machines stability test.37Annex B (normative)
Dimensional tolerances of saw spindles.38Annex C (normative)
Riving knife mounting strength test.39Annex D (normative)
Riving knife lateral stability test.40Annex E (normative)
Sawblade guard stability test.41E.1General.41E.2Machines with sawblade guards with lead-in.41E.3Machines with sawblade guards with in-feed rollers.41Annex F (informative)
Safe working practice.43Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.45Bibliography.46SIST EN 1870-5:2003
- Part 1:General requirementsHD 22.4 S3Rubber insulated cables of rated voltages up to and including 450/750 V
- Part4: Cord
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.