SIST EN 301 178-2:2001

SLOVENSKI STANDARD
01-julij-2001
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]DSUHQRVQHUDGLRWHOHIRQVNHQDSUDYH
9+)]DSRPRUVNRPRELOQRVOXåERNLGHOXMHMRQDSDVRYLK9+)VDPR]DXSRUDER
L]YHQ*0'66GHO+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQD
GLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High
Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in
the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under article
3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 178-2 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands (for non-GMDSS applications only);
Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

2 ETSI EN 301 178-2 V1.1.1 (2000-08)
Reference
REN/ERM-RP01-040-2
Keywords
Maritime, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 944200 Fax:+33 4 936547 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
3 ETSI EN 301 178-2 V1.1.1 (2000-08)
Contents
Intellectual Property Rights .5
Foreword .5
Introduction.6
1 Scope.8
2 References.8
3 Definitions, symbols and abbreviations.9
3.1 Definitions. 9
3.2 Symbols. 9
3.3 Abbreviations. 9
4 Technical requirements specifications .9
4.1 Environmental profile . 9
4.2 Conformance requirements . 9
4.2.1 Transmitter frequency error. 9
4.2.1.1 Definition. 9
4.2.1.2 Limit . 9
4.2.1.3 Conformance. 10
4.2.2 Transmitter carrier power. 10
4.2.2.1 Definition. 10
4.2.2.2 Limit . 10
4.2.2.3 Conformance. 10
4.2.3 Transmitter frequency deviation. 10
4.2.3.1 Definition. 10
4.2.3.2 Limit . 10
4.2.3.3 Conformance. 10
4.2.4 Transmitter adjacent channel power. 10
4.2.4.1 Definition. 10
4.2.4.2 Limit . 10
4.2.4.3 Conformance. 10
4.2.5 Transmitter conducted spurious emissions conveyed to the antenna. 10
4.2.5.1 Definition. 10
4.2.5.2 Limit . 11
4.2.5.3 Conformance. 11
4.2.6 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 11
4.2.6.1 Definition. 11
4.2.6.2 Limit . 11
4.2.6.3 Conformance. 11
4.2.7 Transient frequency behaviour of the transmitter . 11
4.2.7.1 Definition. 11
4.2.7.2 Limit . 11
4.2.7.3 Conformance. 11
4.2.8 Receiver maximum usable sensitivity. 11
4.2.8.1 Definition. 11
4.2.8.2 Limit . 11
4.2.8.3 Conformance. 11
4.2.9 Receiver co-channel rejection . 12
4.2.9.1 Definition. 12
4.2.9.2 Limit . 12
4.2.9.3 Conformance. 12
4.2.10 Receiver adjacent channel selectivity. 12
4.2.10.1 Definition. 12
4.2.10.2 Limit . 12
ETSI
4 ETSI EN 301 178-2 V1.1.1 (2000-08)
4.2.10.3 Conformance. 12
4.2.11 Receiver spurious response rejection . 12
4.2.11.1 Definition. 12
4.2.11.2 Limit . 12
4.2.11.3 Conformance. 12
4.2.12 Receiver intermodulation response. 12
4.2.12.1 Definition. 12
4.2.12.2 Limit . 12
4.2.12.3 Conformance. 12
4.2.13 Receiver blocking or desensitization. 13
4.2.13.1 Definition. 13
4.2.13.2 Limit . 13
4.2.13.3 Conformance. 13
4.2.14 Receiver conducted spurious emissions . 13
4.2.14.1 Definition. 13
4.2.14.2 Limit . 13
4.2.14.3 Conformance. 13
4.2.15 Receiver radiated spurious emissions. 13
4.2.15.1 Definition. 13
4.2.15.2 Limit . 13
4.2.15.3 Conformance. 13
5 Testing for compliance with technical requirements.13
5.1 Test conditions, power supply and ambient temperatures. 13
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 14
5.3.1 Transmitter frequency error. 14
5.3.2 Transmitter carrier power. 14
5.3.3 Transmitter frequency deviation. 14
5.3.4 Transmitter adjacent channel power. 15
5.3.5 Transmitter conducted spurious emissions conveyed to the antenna. 15
5.3.6 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.7 Transient frequency behaviour of the transmitter . 15
5.4 Other test specifications. 15
5.4.1 General . 15
5.4.2 Receiver maximum usable sensitivity. 15
5.4.3 Receiver co-channel rejection . 15
5.4.4 Receiver adjacent channel selectivity. 15
5.4.5 Receiver spurious response rejection . 15
5.4.6 Receiver intermodulation response. 15
5.4.7 Receiver blocking or desensitization. 16
5.4.8 Receiver conducted spurious emissions . 16
5.4.9 Receiver radiated spurious emissions. 16
Annex A (normative): The EN Requirements Table (EN-RT).17
History.19
ETSI
5 ETSI EN 301 178-2 V1.1.1 (2000-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part EN covering the Electromagnetic compatibility and Radio spectrum
Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service
operating in the VHF bands (for non-GMDSS applications only), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [6] laying down a procedure for the provision of information in the field of technical
standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
National transposition dates
Date of adoption of this EN: 21 July 2000
Date of latest announcement of this EN (doa): 31 October 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2001
Date of withdrawal of any conflicting National Standard (dow): 30 April 2001
ETSI
6 ETSI EN 301 178-2 V1.1.1 (2000-08)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The
modular structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Inter-working via the network*
equipment
3.3a class or type
Inter-working with the network
Use of spectrum
3.2
New radio harmonised standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
Existing EMC standards to be replaced
by a new, single, multi-part standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
New standards for human exposure to Electromagnetic Fields
and, if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive [1]
ETSI
7 ETSI EN 301 178-2 V1.1.1 (2000-08)
The left hand edge of the figure 1 shows the different subclauses of Article 3 of the R&TTE Directive [1].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present
document essential requirements in
...