SIST EN 1869:1997
(Main)Fire blankets
Fire blankets
This standard specifies requirements for fire blankets which are not re-usable and are intended for use by one person. It is applicable to fire blankets primarily intended for extinguishing cooking oil fires. NOTE: It is anticipated that they can also be used on fires involving personal clothing
Löschdecken
Die vorliegende Norm legt die Anforderungen an Löschdecken fest, die nicht wiederverwendbar und zur Benutzung durch eine einzelne Person bestimmt sind. Sie findet Anwendung auf Löschdecken, die hauptsächlich zum Löschen von Speiseölbränden vorgesehen sind. ANMERKUNG: Es ist zu erwarten, dass die Löschdecken auch zum Löschen von Bränden verwendet werden können, die auf die persönliche Kleidung übergrei- fen.
Couvertures anti-feu
La présente norme spécifie les exigences pour les couvertures anti-feu à usage unique et prévues pour une seule personne. Elle s'applique aux couverturesanti-feu essentiellement destinées à éteindre les feux d'huile de cuisine. NOTE: Il est prévu qu'elles peuvent également être utilisées sur des feux impliquant des vêtements individuels.
Požarne odeje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1997
Požarne odeje
Fire blankets
Löschdecken
Couvertures anti-feu
Ta slovenski standard je istoveten z: EN 1869:1997
ICS:
13.220.10 Gašenje požara Fire-fighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
--------------
...
This May Also Interest You
This document specifies safety and performance requirements for powered rescue tools manufactured after the date of publication.
This document is applicable to powered rescue tools which are intended for use by the firefighting and rescue services, principally for cutting, crushing, spreading, squeezing, pushing or pulling the structural parts of road vehicles, ships, trains, aircraft and building structures involved in accidents. This document is not applicable to hydraulic power packs covered by 2000/14/EC.
Powered rescue tools consist of tool(s) and the necessary system components (e.g. energy source, drive system and prime mover) and intended accessories, as defined in Clause 3.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to the machinery, when it is used as intended and under conditions or misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 The aim of powered rescue tools is to assist the firefighting and rescue services while extracting the casualties or to create a working space for paramedical services taking the local conditions into account.
This document does not include:
- tools with pneumatic drive systems or pneumatic energy sources;
- tools which are single acting (for example spring /gravity return jacks, powered struts, etc.).
It is not applicable to additional requirements for:
a) operation in severe conditions (e.g. extreme environmental conditions such as temperatures outside the range –20 °C and +55 °C, corrosive environment, tropical environment, contaminating environments, strong magnetic fields, potentially explosive atmospheres, underwater use);
b) the risk directly arising from the means provided for the portability, transportability, mobility and decommissioning of powered rescue tools during periods of their operation;
c) generic tools such as, but not limited to, powered drills, angle grinders, saws, not solely intended for extrication purposes;
d) tools intended to lift and/or hoist, not solely intended for extrication purposes.
NOTE 2 EN 13731:2007 deals with lifting bag systems for fire and rescue services.
NOTE 3 For the EU/EEA other Directives can be applicable to the equipment in the scope, for example the Electro Magnetic Compatibility Directive.
- Standard77 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Oct-2022
- 03-Apr-2025
- 11.160
- 13.220.10
- 2006/42/EC
- M/396
- POZ
This document specifies requirements for the design and installation of early suppression fast response (ESFR) and control mode specific application (CMSA) sprinklers in automatic sprinkler systems, in accordance with this standard and additionally the EN 12845 series of standards.
This document does not cover all legislative requirements.
NOTE In certain countries, specific national regulations can apply. Attention is drawn to the applicability or non-applicability for this document as specified by national responsible authorities.
- Standard60 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1.
NOTE 1 Categories and mass classes of these vehicles are given in EN 1846-1.
NOTE 2 Vehicle means terrestrial vehicles that can also drive on rails and amphibious vehicles.
When drafting this document, it has been assumed that the finished standard automotive chassis (or
the chassis designed in accordance with the same principles) that is the basis for the firefighting or
rescue vehicle offers an acceptable safety level for its basic transport functions within the limits
specified by the manufacturer. Therefore, this document does not formulate requirements for this
chassis.
This document deals with all significant hazards, hazardous situations and events relevant to
firefighting and rescue service vehicles, when they are used as intended and under the conditions of
misuse which are reasonably foreseeable by the manufacturer.
Complementary specific requirements for aerial appliances are the subject of the following European
Standards:
— EN 1777: Hydraulic platforms (HPs) for firefighting and rescue services,
— EN 14043: Turntable ladders with combined movements,
— EN 14044: Turntable ladders with sequential movements.
NOTE 3 Additional regulations, not dealt with in this document, can apply in relation with the use of the
vehicles on public roads.
This document deals with firefighting and rescue vehicles intended for use in a temperature range
from –15 °C to +40 °C.
NOTE 4 In the case of utilization outside this temperature range, additional measures might be necessary as agreed between the manufacturer and the user. Such requirements are outside the scope of this document.
1.2 This document does not deal with the following types of firefighting or rescue vehicles or equipment:
- vehicles designed exclusively for carrying personnel;
- vehicles with a gross laden mass not exceeding 3 t;
- boats;
- aircraft;
- railway vehicles;
- ambulances (see EN 1789);
- provisions for non-firefighting removable equipment driven by PTO;
- airport vehicles in the scope of the recommendations of the International Civil Aviation Organization (ICAO).
1.3 This document deals with the technical requirements to minimize the hazards listed in Annex K which can arise during operational use, routine checking and maintenance of firefighting and rescue service vehicles when carried out in accordance with the specifications given by the manufacturer or his authorized representative.
It does not cover the hazards generated by:
- non-permanently installed equipment i.e. portable equipment carried on the vehicle;
- use in potentially explosive atmospheres;
- commissioning and decommissioning;
- electromagnetic compatibility.
Additional measures not dealt with in this document might be necessary for specific use (e.g. fire in natural environment, flooding, etc.).
1.4 This document is not applicable to machines that are manufactured before its date of publication as a European Standard.
- Standard77 pagesEnglish languagesale 10% offe-Library read for×1 day
- 29-Jun-2022
- 07-Jan-2025
- 13.220.10
- 43.160
- 2006/42/EC
- M/396
- POZ
This document specifies design, assembly, installation and commissioning requirements for pump sets for use in sprinkler systems conforming to EN 12845:2015+A1:2019.
Where applicable, this document can also be used for pump sets for other water based fixed firefighting systems.
- Standard45 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gas extinguishing systems in buildings, plants or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium.
This document describes total flooding systems primarily related to buildings, plants and other specific applications, utilizing electrically non-conducting gaseous fire extinguishants that do not leave a residue after discharge and for which there are sufficient data currently available to enable validation of performance and safety characteristics by an appropriate independent authority. This document is not applicable to explosion suppression.
This document is not intended to indicate approval of the extinguishants listed therein by the appropriate authorities, as other extinguishants may be equally acceptable. CO2 is not included as it is covered by its own European standard.
This document is applicable to the extinguishants listed in Table 1. This document is intended to be used in conjunction with the given parts of EN 15004 for fire extinguishing agents in Table 1.
Table 1 - Listed extinguishant
[...table not represented...]
- Standard126 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the evaluation of the fire performance of water mist systems for non-stacking garages, fully enclosed garages and underground garages.
This document is applicable for horizontal, solid, flat ceilings with heights of 2 m and above.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies product characteristics and test methods of open nozzles and automatic nozzles for use in water mist systems.
NOTE All pressure data in this document are given as gauge pressures in bar.
- Standard37 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat and incorporating the following types of water seals:
— conical metal spring with a PTFE gasket or coating;
— metal cap or disc with PTFE gasket or coating;
— copper gasket, with or without a PTFE coating.
Sprinklers in accordance with this document are only used in automatic sprinkler systems for domestic and residential applications as defined in EN 16925.
- Standard61 pagesEnglish languagesale 10% offe-Library read for×1 day
This document provides specific requirements for gaseous fire-extinguishing systems with respect to the Halocarbon Blend 55 extinguishant. It includes details of physical properties, specification, usage and safety aspects. It also covers systems operating at nominal pressures of 25 bar, 35 bar, and 42 bar and 50 bar, superpressurized with nitrogen. This document does not preclude the use of other systems.
NOTE 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and test methods for materials, construction and performance of components intended for use in powder firefighting systems complying with EN 12416-2:2001+A1:2007.
The components covered are as follows:
- powder containers;
- expellant gas container assemblies;
- pressure regulators and gauges;
- actuators;
- main isolating valves and selector valves;
- nozzles.
The components are suitable for powder firefighting systems for general use in buildings and other construction works. In areas with a risk of explosion, earthquake zones, extreme environmental conditions, e.g. marine, offshore, mining or aircraft additional considerations apply.
This document covers components for use in powder extinguishing systems complying with EN 12416-2:2001+A1:2007. It does not cover, for example, pipes and fittings which are covered by more general standards for which requirements and recommendations are given in EN 12416-2:2001+A1:2007. Nor does it cover fire detectors or electrical control and indicating equipment.
- Standard39 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.