SIST EN 300 443-6 V1.2.1:2003
(Main)Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
General Information
- Abstract
Upgrade of Test Specification.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
Overview
SIST EN 300 443-6 V1.2.1:2003 is a European standard that focuses on testing and verifying the conformance of network implementations to the Digital Subscriber Signalling System No. two (DSS2) protocol at the B-ISDN user-network interface, specifically for basic call and bearer control. This part, produced by the Slovenian Institute for Standardization (SIST) and harmonized with ETSI EN 300 443-6, details the Abstract Test Suite (ATS) and the partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network, supporting quality assurance in broadband ISDN deployments.
The standard establishes a structured approach for manufacturers, service providers, and test laboratories to assess protocol conformance, ensuring interoperability and reliable network operations for broadband ISDN (B-ISDN) infrastructures.
Key Topics
Abstract Test Suite (ATS):
- Provides well-defined test scenarios and cases to systematically evaluate network DSS2 protocol implementations at the user-network interface.
- Ensures that network entities comply with essential signaling and bearer control requirements, focusing on layer 3 functionality.
Partial PIXIT Proforma:
- Gathers test-related configuration and protocol details about an implementation under test.
- Ensures test reproducibility and helps adapt testing methods for network-specific deployments.
Protocol Conformance Test Report (PCTR):
- Specifies requirements for documenting and reporting results of conformance testing.
- Assists in verifying and recording protocol compliance for regulatory, operational, and vendor assurance purposes.
Multi-Party Test Methods:
- Specifies the structure and behavior of test systems simulating complex real-world network interfaces.
- Uses master/slave test components to emulate and observe protocol behavior at multiple service access points.
Alignment with International Standards:
- Builds upon established methodologies defined in the ISO/IEC 9646 series for OSI conformance testing.
- Compatible with ITU-T Recommendations regarding B-ISDN user-network interfaces (e.g., I.413).
Applications
Network Equipment Verification:
- Ensures switches, nodes, and other network elements support the DSS2 protocol as per B-ISDN specifications.
- Minimizes interoperability risks in multi-vendor broadband ISDN networks.
Vendor and Operator Conformance Testing:
- Provides a rigorous checklist and test environment for vendors and network operators deploying new equipment or updating existing B-ISDN infrastructure.
Test Laboratory Accreditation and Services:
- Enables test laboratories to offer standardized, objective, and repeatable conformance testing services for B-ISDN/DSS2.
- Facilitates the generation of standardized protocol conformance test reports (PCTR) and tailored PIXIT proforma documentation.
Regulatory and Procurement Compliance:
- Supports procurement processes and regulatory requirements by providing evidence of conformance with pan-European ISDN standards.
Related Standards
- SIST EN 300 443-1: Protocol specification for DSS2 at the B-ISDN user-network interface layer 3.
- SIST EN 300 443-2: Protocol Implementation Conformance Statement (PICS) proforma for DSS2.
- SIST EN 300 443-5: Test Suite Structure and Test Purposes (TSS&TP) for the network side.
- ISO/IEC 9646 Series: General framework and methodology for conformance testing of OSI protocols.
- ITU-T Recommendation I.413: Reference configurations for B-ISDN user-network interface.
Key terms: B-ISDN, DSS2 protocol, user-network interface, conformance testing, ATS, PIXIT, broadband ISDN, protocol validation, test suite, test proforma, network interoperability.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 443-6 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network". This standard covers: Upgrade of Test Specification.
Upgrade of Test Specification.
SIST EN 300 443-6 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 443-6 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHBroadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 443-6 Version 1.2.1SIST EN 300 443-6 V1.2.1:2003en01-december-2003SIST EN 300 443-6 V1.2.1:2003SLOVENSKI
STANDARD
ETSIEN300443-6V1.2.1(2000-10)EuropeanStandard(Telecommunicationsseries)BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part6:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetworkSIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)2ReferenceREN/SPAN-05143-6KeywordsATS,BC,broadband,B-ISDN,DSS2,ISDN,layer3,network,PIXIT,UNIETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.74AbstractTestMethod.84.1DescriptionofATMused.84.2ConventionsfortestcomponentsandPCOs.85Untestabletestpurposes.96ATStoTPmap.97PCTRconformance.108PIXITconformance.109ATSconformance.10AnnexA(normative):ProtocolConformanceTestReport(PCTR)proforma.11A.1Identificationsummary.11A.1.1Protocolconformancetestreport.11A.1.2IUTidentification.11A.1.3Testingenvironment.11A.1.4Limitsandreservations.12A.1.5Comments.12A.2IUTConformancestatus.12A.3Staticconformancesummary.12A.4Dynamicconformancesummary.13A.5Staticconformancereviewreport.13A.6Testcampaignreport.13A.7Observations.22AnnexB(normative):PartialPIXITproforma.23B.1Identificationsummary.23B.2Abstracttestsuitesummary.23B.3Testlaboratory.23B.4Client(ofthetestlaboratory).24B.5SUT.24B.6Protocolinformation.25B.6.1Protocolidentification.25B.6.2Configurationtobetested.25B.6.3StimulifortheIUT.26B.6.4Testmanagementtimers.26B.6.5ParameterValues.26SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)4AnnexC(normative):AbstractTestSuite(ATS).29C.1TheTTCNGraphicalform(TTCN.GR).29C.2TheTTCNMachineProcessableform(TTCN.MP).29History.30SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart6ofamulti-partstandardcoveringtheDigitalSubscriberSignallingSystemNo.2(DSS2)protocolspecificationfortheB-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol,asidentifiedbelow:Part1:"Protocolspecification";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser";Part5:"TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork";Part6:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetwork".NationaltranspositiondatesDateofadoptionofthisEN:6October2000DateoflatestannouncementofthisEN(doa):31January2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31July2001DateofwithdrawalofanyconflictingNationalStandard(dow):31July2001SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)61ScopeThissixthpartofEN300443specifiesthenetworkAbstractTestSuite(ATS)fortheTBreferencepointorcoincidentSBandTBreferencepoint(asdefinedinITU-TRecommendationI.413[9])ofimplementationsconformingtothestandardsforthesignallinguser-networklayer3specificationforbasiccall/bearercontroloftheDigitalSubscriberSignallingSystemNo.two(DSS2)protocolforthepan-EuropeanBroadbandIntegratedServicesDigitalNetwork(B-ISDN),EN300443-1[1].EN300443-5[3]specifiestheTestSuiteStructureandTestPurposes(TSS&TP)relatedtothisATSandpartialPIXITproforma.OtherpartsspecifytheTSS&TPandtheATSandpartialPIXITproformafortheUsersideoftheTBreferencepointorcoincidentSBandTBreferencepointofimplementationsconformingtoEN300443-1[1].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300443-1(V1.3):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part1:Protocolspecification[ITU-TRecommendationQ.2931(1995),modified]".[2]ETSIEN300443-2(V1.2):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[3]ETSIEN300443-5(V1.2):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part5:TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork".[4]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[5]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:AbstractTestSuitespecification".[6]ISO/IEC9646-3:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[7]ISO/IEC9646-4:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part4:Testrealization".[8]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[9]ITU-TRecommendationI.413(1993):"B-ISDNuser-networkinterface".SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)73Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:ImplementationUnderTest(IUT):seeISO/IEC9646-1[4]SystemUnderTest(SUT):seeISO/IEC9646-1[4]AbstractTestSuite(ATS):seeISO/IEC9646-1[4]ProtocolImplementationConformanceStatement(PICS):seeISO/IEC9646-1[4]PICSproforma:seeISO/IEC9646-1[4]ProtocolImplementationeXtraInformationforTesting(PIXIT):seeISO/IEC9646-1[4]PIXITproforma:seeISO/IEC9646-1[4]LowerTester(LT):seeISO/IEC9646-1[4]UpperTester(UT):seeISO/IEC9646-1[4]PointofControlandObservation(PCO):seeISO/IEC9646-1[4]3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATMAbstractTestMethodATSAbstractTestSuiteB-ISDNBroadbandIntegratedServicesDigitalNetworkCMCo-ordinationMessageCPCo-ordinationPointDSS2DigitalSubscriberSignallingSystemNo.twoExTSExecutableTestSuiteISDNIntegratedServicesDigitalNetworkIUTImplementationUnderTestLTLowerTesterMOTMeansOfTestingMTCMainTestComponentPCOPointofControlandObservationPCTRProtocolConformanceTestReportPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPTCParallelTestComponentSUTSystemUnderTestTPTestPurposeTTCNTreeandTabularCombinedNotationUTUpperTesterSIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)84AbstractTestMethod4.1DescriptionofATMusedTherequirementfortestingthenetworkIUTistofocusonthebehaviourofthenetworkIUTattheuser-networkinterfacewhereaTBreferencepointorcoincidentSBandTBreferencepointapplies.ThustheIUTisthenetworkDSS2protocolentityataparticularuser-networkinterfaceandisnotthewholenetwork.ItispossibletospecifyanATSbasedonasingleparty(remote)testmethodforsuchanIUT.However,itisconsideredthatanATSbasedonsuchanapproachisoflimiteduseastheonlywaytospecifyIUTgeneratedPDUsistousethe"implicitsend"statement.ManyusersofsuchanATSwouldreplacethe"implicitsend"statementswithdescriptionsofthebehaviouratotherinterfaces.AnATSbasedonamulti-partytestmethodisconsideredtobemoreusefulinthatitisclosertohowarealtestsuitewouldbeconstructed.Suchatestmethodspecifiesbehaviouratmultiplenetworkinterfaces.Oneveryimportantlimitationhereisthattestsarefocussedononeparticularinterface.ThusthetestsystemismadeuponeMainTestComponent(MTC)andoneormoreParallelTestComponents(PTC),seefigure1.4.2ConventionsfortestcomponentsandPCOsMasterpartSlavepartMTCAPTC1A1(CP)L0(PCO)L1(PCO)IUTNETWORKFigure1:Multi-partytestmethodInamaster/slavearrangement,theMTCisconsideredtobethemasterwhilethePTCsaretheslaves.The"slave"testersareonlyanexplicitdescriptionofhowtodealwiththeremoteinterfacesduringthetestingprocess,i.e."howtomaketheIUTsendtherequiredmessage".SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)9Thismeans,inparticular,thattheverdictwillonlybeassignedfromtheprotocolaspectsobservedontheinterfaceundertest(i.e.bythe"master"tester),asitwouldbeobservedbyaterminalconnectedtothisinterface.Afailureinthecorrelationbetweentheprotocolatthedifferentinterfacestowhichthedifferenttestersareconnected,i.e.inthemechanismofthefunctionalserviceitself,willnotcauseaFAILverdict.Forinstance,iftheIUTfailstosendamessageonthetestedinterfaceafteranotherinterfacehasreceivedtheproperstimulus,theverdictwillbeINCONCLUSIVE.TheMTCMTCAhastwofunctionsinthisconfiguration.Firstly,ithastheMTCfunctionofcontrollingtheoneormorePTCs.ThusitisresponsibleforstartingthePTCsandafterwardsco-ordinatesactivitiesbyexchangingCo-ordinationMessages(CM)withthePTCs.SecondlyitisresponsibleforthebehaviouroftheLowerTester(LT)atPCOL0.Acombinationoftheremoteandmulti-partytestmethodsisapplied.Ascanbeseenfromfigure1,severalPCOsareused.AllPCOsresideattheserviceaccesspointsbetweenlayers2and3.MTCSUTPTC1Layer3Layer2Layer1L0IUTL1Layer3Layer2Layer1ServiceproviderFigure2:Combinationoftheremoteandmulti-partytestmethodsTheMTCPCOisnamed"L0"("L"forLower).TheL0PCOisusedtocontrolandobservethebehaviouroftheIUTandtestcaseverdictsareassigneddependingonthebehaviourobservedatthisPCO.ThePTCPTC1usesPCOsL1.ThesePCOisusedtocontroland,inalimitedway,observethebehaviourofthenetworkequipmentatinterfaceotherthantheoneundertest.NoverdictsareassignedatthisPCO.Asstatedinapreviousparagraph,thenon-receiptofnetworkgeneratedmessagesatL0,whicharestimulatedbyeventsattheL1,willresultinINCONCLUSIVEratherthanFAILverdictsbeingassigned.IntestcaseswhichverifythattheIUTrejectsinvalidorunacceptableSETUPmessagesandinthemajorityofthetestcasesfortherestartprocedures,noPTCisactivatedatall,astheseproceduresareconsideredlocaltotheaccessbetweenIUTandMTC.5UntestabletestpurposesTherearenountestabletestpurposesassociatedwiththisATS.6ATStoTPmapTheidentifiersusedfortheTPs(seeEN300443-5[3])arereusedastestcasenames.Thusthereisastraightforwardone-to-onemapping.SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)107PCTRconformanceAtestlaboratory,whenrequestedbyaclienttoproduceaPCTR,isrequired,asspecifiedinISO/IEC9646-5[8],toproduceaPCTRconformantwiththePCTRtemplategiveninannexBofISO/IEC9646-5[8].Furthermore,atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,whenrequestedbyaclienttoproduceaPCTR,isrequiredtoproduceaPCTRconformantwiththePCTRproformacontainedinannexAofthepresentdocument.APCTRwhichconformstothisPCTRproformaspecificationshallpreservethecontentandorderingoftheclausescontainedinannexA.ClauseA.6ofthePCTRmaycontainadditionalcolumns.Ifincluded,theseshallbeplacedtotherightoftheexistingcolumns.Textinitalicsmayberetainedbythetestlaboratory.8PIXITconformanceAtestrealizer,producinganexecutabletestsuitefortheAbstractTestSuite(ATS)specificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-4[7],toproduceanaugmentedpartialPIXITproformaconformantwiththispartialPIXITproformaspecification.AnaugmentedpartialPIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.TheaugmentedpartialPIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparetheMeansOfTesting(MOT)foraparticularImplementationUnderTest(IUT).Atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-5[8],tofurtheraugmenttheaugmentedpartialPIXITproformatoproduceaPIXITproformaconformantwiththispartialPIXITproformaspecification.APIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.ThePIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparethetestlaboratoryforaparticularIUT.9ATSconformanceThetestrealizerproducingaMeansOfTesting(MOT)andExecutableTestSuite(ExTS)forthisAbstractTestSuite(ATS)specificationshallcomplywiththerequirementsofISO/IEC9646-4[7].Inparticular,theseconcerntherealizationofanExTSbasedoneachATS.ThetestrealizershallprovideastatementofconformanceoftheMOTtothisATSspecification.AnExTSwhichconformstothisATSspecificationshallcontaintestgroupsandtestcaseswhicharetechnicallyequivalenttothosecontainedintheATSinannexC.Allsequencesoftesteventscomprisinganabstracttestcaseshallbecapableofbeingrealizedintheexecutabletestcase.AnyfurthercheckingwhichthetestsystemmightbecapableofperformingisoutsidethescopeofthisATSspecificationandshallnotcontributetotheverdictassignmentforeachtestcase.TestlaboratoriesrunningconformancetestservicesusingthisATSshallcomplywithISO/IEC9646-5[8].AtestlaboratorywhichclaimstoconformtothisATSspecificationshalluseanMOTwhichconformstothisATS.SIST EN 300 443-6 V1.2.1:2003
ETSIETSIEN300443-6V1.2.1(2000-10)11AnnexA(normative):ProtocolConformanceTestReport(PCTR)proformaNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePCTRproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPCTR.A.1IdentificationsummaryA.1.1ProtocolconformancetestreportPCTRnumber:PCTRDate:CorrespondingSCTRnumber:CorrespondingSCTRdate:TestLa
...