SIST ES 203 119-2 V1.5.1:2022

Final draft ETSI ES 203 119-2 V1.5.1 (2022-03)

ETSI STANDARD
Methods for Testing and Specification (MTS);
The Test Description Language (TDL);
Part 2: Graphical Syntax
2 Final draft ETSI ES 203 119-2 V1.5.1 (2022-03)

Reference
RES/MTS-TDL1192v151
Keywords
graphical notation, language, MBT, methodology,
testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
n or warranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representatio
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.
ETSI
3 Final draft ETSI ES 203 119-2 V1.5.1 (2022-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Basic principles . 7
4.1 Introduction . 7
4.2 Document Structure . 7
4.3 Notational Conventions . 8
4.3.0 General . 8
4.3.1 Symbols and meanings for shapes . 8
4.3.2 Symbols for non-terminal textual labels . 8
4.3.3 Examples . 9
4.4 Conformance . 10
5 Diagram . 11
6 Shapes. 11
6.1 Foundation . 11
6.1.1 Element . 11
6.1.2 NamedElement . 11
6.1.3 ElementImport . 12
6.1.4 Package . 12
6.1.5 Comment . 13
6.1.6 AnnotationType . 13
6.1.7 Annotation . 14
6.1.8 TestObjective . 14
6.1.9 Extension . 15
6.1.10 ConstraintType . 15
6.1.11 Constraint . 15
6.2 Data . 16
6.2.1 SimpleDataType . 16
6.2.2 StructuredDataType . 16
6.2.3 CollectionDataType . 17
6.2.4 ProcedureSignature . 18
6.2.5 Time . 18
6.2.6 DataInstance . 18
6.2.7 SimpleDataInstance . 19
6.2.8 StructuredDataInstance . 19
6.2.9 CollectionDataInstance . 20
6.2.10 Parameter . 21
6.2.11 Action . 21
6.2.12 Function . 22
6.2.13 DataResourceMapping . 22
6.2.14 ParameterMapping . 23
6.2.15 DataElementMapping . 23
6.2.16 DataUse . 23
6.2.17 StaticDataUse . 24
6.2.18 DataInstanceUse . 25
ETSI
4 Final draft ETSI ES 203 119-2 V1.5.1 (2022-03)
6.2.19 AnyValue . 25
6.2.20 AnyValueOrOmit . 26
6.2.21 OmitValue. 26
6.2.22 DynamicDataUse . 26
6.2.23 FunctionCall . 27
6.2.24 FormalParameterUse . 27
6.2.25 VariableUse . 28
6.2.26 PredefinedFunctionCall . 28
6.2.27 LiteralValueUse . 28
6.2.27 DataType . 29
6.2.28 EnumDataType . 29
6.2.29 DataElementUse . 30
6.3 Time . 31
6.3.1 TimeLabel .
...

SLOVENSKI STANDARD
01-september-2022
Metode za preskušanje in specificiranje (MTS) - Jezik za opis preskusa (TDL) - 2.
del: Grafična skladnja
Methods for Testing and Specification (MTS) - The Test Description Language (TDL) -
Part 2: Graphical Syntax
Ta slovenski standard je istoveten z: ETSI ES 203 119-2 V1.5.1 (2022-05)
ICS:
35.060 Jeziki, ki se uporabljajo v Languages used in
informacijski tehniki in information technology
tehnologiji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI STANDARD
Methods for Testing and Specification (MTS);
The Test Description Language (TDL);
Part 2: Graphical Syntax
2 ETSI ES 203 119-2 V1.5.1 (2022-05)

Reference
RES/MTS-TDL1192v151
Keywords
graphical notation, language, MBT, methodology,
testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
and/or
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.
ETSI
3 ETSI ES 203 119-2 V1.5.1 (2022-05)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Basic principles . 7
4.1 Introduction . 7
4.2 Document Structure . 7
4.3 Notational Conventions . 8
4.3.0 General . 8
4.3.1 Symbols and meanings for shapes . 8
4.3.2 Symbols for non-terminal textual labels . 8
4.3.3 Examples . 9
4.4 Conformance . 10
5 Diagram . 11
6 Shapes. 11
6.1 Foundation . 11
6.1.1 Element . 11
6.1.2 NamedElement . 11
6.1.3 ElementImport . 12
6.1.4 Package . 12
6.1.5 Comment . 13
6.1.6 AnnotationType . 13
6.1.7 Annotation . 14
6.1.8 TestObjective . 14
6.1.9 Extension . 15
6.1.10 ConstraintType . 15
6.1.11 Constraint . 15
6.2 Data . 16
6.2.1 SimpleDataType . 16
6.2.2 StructuredDataType . 16
6.2.3 CollectionDataType . 17
6.2.4 ProcedureSignature . 17
6.2.5 Time . 18
6.2.6 DataInstance . 18
6.2.7 SimpleDataInstance . 19
6.2.8 StructuredDataInstance . 19
6.2.9 CollectionDataInstance . 20
6.2.10 Parameter . 20
6.2.11 Action . 21
6.2.12 Function . 21
6.2.13 DataResourceMapping . 22
6.2.14 ParameterMapping . 22
6.2.15 DataElementMapping . 23
6.2.16 DataUse . 23
6.2.17 StaticDataUse . 24
6.2.18 DataInstanceUse . 24
6.2.19 AnyValue . 25
6.2.20 AnyValueOrOmit . 25
ETSI
4 ETSI ES 203 119-2 V1.5.1 (2022-05)
6.2.21 OmitValue. 26
6.2.22 DynamicDataUse . 26
6.2.23 FunctionCall . 26
6.2.24 FormalParameterUse . 27
6.2.25 VariableUse . 27
6.2.26 PredefinedFunctionCall . 27
6.2.27 LiteralValueUse .
...