iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 840-6:2000

(Main)

Mobile waste containers - Part 6: Safety and health requirements

Mobile waste containers - Part 6: Safety and health requirements

This part 6 of the European Standard provides the most essential safety and health requirements for mobile waste containers, not including hazardous wastes containers.

Fahrbare Abfallsammelbehälter - Teil 6: Sicherheits- und Gesundheitsanforderungen

Dieser Teil der Europäischen Normenreihe prEN 840 enthält die wichtigsten Sicherheits- und Gesundheitsanforderungen für fahrbare Abfallsammelbehälter. Er behandelt keine Behälter für gefährliche Abfälle.

Conteneurs roulants a déchets - Partie 6: Exigences d'hygiene et de sécurité

Cette partie de la Norme Européenne prEN 840 indique les exigences essentielles en matière de sécurité et de santé pour les conteneurs mobiles à déchets, étant exclus les conteneurs pour déchets dangereux.

Mobilni zbiralniki odpadkov - 6. del: Varnostne in zdravstvene zahteve

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
31-Jan-2005
ICS
13.030.40 - Installations and equipment for waste disposal and treatment
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Feb-2005
Due Date
01-Feb-2005
Completion Date
01-Feb-2005
Ref Project
EN 840-6:1997 - Mobile waste containers - Part 6: Safety and health requirements

Relations

Replaced By
SIST EN 840-6:2004 - Mobile waste containers - Part 6: Safety and health requirements
Effective Date
01-Feb-2005
Amended By
SIST EN 840-6:2000/A1:2001 - Mobile waste containers - Part 6: Safety and health requirements
Effective Date
22-Dec-2008

Buy Standard

EN 840-6:2000EN 840-6:2000
PreviousNext
Standard
EN 840-6:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2000
Mobilni zbiralniki odpadkov - 6. del: Varnostne in zdravstvene zahteve
Mobile waste containers - Part 6: Safety and health requirements
Fahrbare Abfallsammelbehälter - Teil 6: Sicherheits- und Gesundheitsanforderungen
Conteneurs roulants a déchets - Partie 6: Exigences d'hygiene et de sécurité
Ta slovenski standard je istoveten z: EN 840-6:1997
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14803:2020+A1:2025(Main + Amendment)
Waste management - Identification and/or determination of the quantity of waste
EN 14803:2020+A1:2024

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15518-3:2024(Main)
Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipment
EN 15518-3:2023

This document specifies the terminology and performance requirements for all sensor components of stationary equipment within a Road Weather Information System (RWIS).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 15518-4:2024(Main)
Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment
CEN/TS 15518-4:2023

This document specifies the test methods, the experimental set-up and result analysis for the laboratory qualification of stationary equipment within a RWIS.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-4:2023(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 1501-4:2023

This document provides all of the information required in order to perform efficiently, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The document ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values.
This document specifies the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501:2021 series.
This document applies to machines which are manufactured after the date of approval of this document by CEN.
Noise emissions of mobile waste and recycling containers are excluded.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17367:2023(Main)
Waste Management - Data communication between communication management system and the back office system for stationary waste collection containers - Functional specification and the semantic data model
EN 17367:2023

This document defines the standard for exchanging stationary waste collection container information between the collection container system and the back-office systems.
This document defines the way to exchange data between the "Communication Management System" of the collection container and the "Back-Office Systems".
The exchange of data between the "Collection Container Systems" and the "Communication Management Systems" or the "Back-Office Systems" is excluded.
This document targets two streams of information in the waste processing industry:
-   The processing of transactions and system information for the deposit of waste from the communication management systems to the back office systems.
-   The processing of authorization and configuration information from the back-office systems to the communication management systems.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CWA 17866:2022(Main)
Key factors for the successful implementation of urban biowaste selective collection schemes
CWA 17866:2022

This CWA provides guidance for the implementation of biowaste selective collection schemes.
This CWA also paves the way to increase citizen engagement, as this is crucial for the successful implementation of urban biowaste selective collection schemes.
It is intended to be used by city managers and municipal waste managers with interest in implementing the selective collection of urban biowaste to produce high quality biowaste (i.e., minimal presence of non-required fractions) which can be then used in robust valorization processes with attractive business cases.

  • Standardization document
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17443:2021(Main)
Winter service equipment - Brine production systems - Requirements and test methods
EN 17443:2021

This document specifies the essential requirements of stationary systems for production of brines for winter road maintenance and includes tests of these requirements. Installation boundary: chloride and water inlet to the saturator, brine outlet to the spreading machine. Within the scope are materials, brine storage and brine loading/unloading equipment also. Mobile systems for production of brines in situ are not content of this document.
The following points are not covered by this document:
-   System and construction requirements;
-   Requirements according to national and European legislations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16907-7:2021(Main)
Earthworks - Part 7: Hydraulic placement of extractive waste
EN 16907-7:2021

This European Standard gives general guidelines for the hydraulic placement of extractive wastes applicable, in particular, to the extractive industries.
The scope of this European Standard includes any dam, confining embankment or other structure serving to contain, retain, confine or otherwise support such wastes on surface in a terrestrial environment.  
This standard therefore addresses the characterisation of the extractive waste for the purposes of hydraulic placement in the MWF both as part of the confining embankment and for safe storage, and in addition:
- specifies minimum requirements for the data to be acquired before the design and execution stage of a hydraulic fill project;
- provides guidelines for the selection of the type of confining embankment appropriate for the selected site;
- provides guidelines for the selection and characterisation of the construction materials;
- establishes general principles on how to design and execute the hydraulic fill project from pre deposition through operation to closure and rehabilitation;
- provides guidelines for monitoring and quality control of all stages of the hydraulic fill project to ensure long-term safety and stability.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-1:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-1:2021

This document applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This document describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5. Safety requirements for loader cranes are defined in EN 12999.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below -25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-2:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-2:2021

This document applies to side loaded refuse collection vehicle (RCV), as defined in prEN 1501-1.
This document deals with all significant hazards, hazardous situations and events relevant to the side loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the side loaded RCV so as to ensure that it is fit for its intended function and can be operated, moved, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the side loaded RCV.
This document describes and defines the safety requirements of side loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s) including the loader cranes and the interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day