ISO 22037:2007
(Main)Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
ISO 22037:2007 specifies types and dimensions of solid end mills, with corner radii and cylindrical shanks, made of hard cutting materials in accordance with ISO 513.
Fraises toriques deux tailles monobloc, à queue cylindrique, en matériaux durs de coupe — Dimensions
L'ISO 22037:2007 spécifie les types et les dimensions des fraises toriques deux tailles monobloc, à queue cylindrique, en matériaux durs de coupe conformément à l'ISO 513.
General Information
- Status
- Published
- Publication Date
- 08-Feb-2007
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 31-Oct-2022
- Completion Date
- 14-Feb-2026
Overview
ISO 22037:2007 specifies the types and dimensions of solid end mills with corner radii and cylindrical shanks made from hard cutting materials. This international standard, published by ISO, is crucial for manufacturers, suppliers, and users involved in the design, production, and application of precision end mills in metalworking operations. The standard aligns with ISO 513 for compliant hard cutting materials and supports global consistency for machining tools.
Key Topics
- End Mill Types:
- Describes both short and long versions of solid end mills with specified corner radii.
- Covers end mills with or without a neck recess.
- Dimensional Requirements:
- Outlines minimum cutting lengths, diameters, radii, and shank sizes.
- Specifies tolerances and recommended combinations as per ISO 286-2.
- Details on neck recess dimensions and preferences.
- Material Classification:
- Focuses on hard cutting materials classified under ISO 513.
- Ensures that the cutting tool materials meet industry standards for durability and performance.
- Interchangeability:
- Promotes compatible tool designs for international markets.
- Facilitates tool standardization for suppliers, manufacturers, and end-users.
Applications
ISO 22037:2007 is widely applied in:
- Metal Cutting and Machining:
- Used for precision metal removal and finishing operations in automotive, aerospace, and general engineering sectors.
- Manufacturing and Tool Production:
- Essential reference for companies producing solid end mills, ensuring that tools meet standardized dimensions for efficient operation and compatibility with existing systems.
- Quality Control and Procurement:
- Allows purchasing professionals and quality inspectors to specify and verify compliant end mills, streamlining supply chain processes and reducing risks of mismatched products.
- Tool Design and Engineering:
- Assists engineers in selecting appropriate end mills for applications requiring specific radii, lengths, and material performance characteristics.
- International Trade:
- Facilitates worldwide trade and sourcing of cutting tools by adhering to common dimensional criteria.
Related Standards
Understanding and applying ISO 22037:2007 is enhanced by referencing associated standards:
- ISO 513 - Classification and application of hard cutting materials for metal removal with defined cutting edges. Provides the base material specification referenced in ISO 22037.
- ISO 286-2 - System of limits and fits, specifying standard tolerance grades and limit deviations for holes and shafts.
- Other ISO End Mill Standards - For additional tool types, geometries, and material specifications relevant to machining and manufacturing.
SEO Keywords: ISO 22037, solid end mills, corner radii, cylindrical shank, hard cutting materials, end mill dimensions, ISO standards for cutting tools, machining tool standards, ISO 513, ISO 286-2, manufacturing standards for end mills, metal cutting tools.
By following ISO 22037:2007, industry professionals ensure that solid end mills are manufactured and used according to internationally recognized dimensions and material requirements, driving efficiency, interoperability, and quality in metalworking and machining operations.
Buy Documents
ISO 22037:2007 - Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions Released:2/9/2007
ISO 22037:2007 - Fraises toriques deux tailles monobloc, a queue cylindrique, en matériaux durs de coupe — Dimensions Released:2/9/2007
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
ISO 22037:2007 is a standard published by the International Organization for Standardization (ISO). Its full title is "Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions". This standard covers: ISO 22037:2007 specifies types and dimensions of solid end mills, with corner radii and cylindrical shanks, made of hard cutting materials in accordance with ISO 513.
ISO 22037:2007 specifies types and dimensions of solid end mills, with corner radii and cylindrical shanks, made of hard cutting materials in accordance with ISO 513.
ISO 22037:2007 is classified under the following ICS (International Classification for Standards) categories: 25.100.20 - Milling tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 22037:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 22037
First edition
2007-02-15
Solid end mills with corner radii and
cylindrical shanks made of hard cutting
materials — Dimensions
Fraises toriques deux tailles monobloc, à queue cylindrique, en
matériaux durs de coupe — Dimensions
Reference number
©
ISO 2007
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22037 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 9, Tools with
cutting edges made of hard cutting materials.
INTERNATIONAL STANDARD ISO 22037:2007(E)
Solid end mills with corner radii and cylindrical shanks made of
hard cutting materials — Dimensions
1 Scope
This International Standard specifies types and dimensions of solid end mills, with corner radii and cylindrical
shanks, made of hard cutting materials in accordance with ISO 513.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 286-2, ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for
holes and shafts
ISO 513, Classification and application of hard cutting materials for metal removal with defined cutting
edges — Designation of the main groups and groups of application
3 Types of
...
NORME ISO
INTERNATIONALE 22037
Première édition
2007-02-15
Fraises toriques deux tailles monobloc, à
queue cylindrique, en matériaux durs de
coupe — Dimensions
Solid end mills with corner radii and cylindrical shanks made of hard
cutting materials — Dimensions
Numéro de référence
©
ISO 2007
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2007
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2007 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 22037 a été élaborée par le comité technique ISO/TC 29, Petit outillage, sous-comité SC 9, Outils
coupants à arête en matériaux durs de coupe.
NORME INTERNATIONALE ISO 22037:2007(F)
Fraises toriques deux tailles monobloc, à queue cylindrique, en
matériaux durs de coupe — Dimensions
1 Domaine d'application
La présente Norme internationale spécifie les types et les dimensions des fraises toriques deux tailles
monobloc, à queue cylindrique, en matériaux durs de coupe conformément à l'ISO 513.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 286-2, Système ISO de tolérances et d'ajustements — Partie 2: Tables des degrés de tolérance
normalisés et des écarts limites des alésages et des arbres
ISO 513, Classification et application des matériaux durs de coupe pou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...