Abstract

This document provides an inventory, as far as known at time of publication, of manufacturer’s identification marks and their assigned radio frequency identification (RFID) codes according to ISO 21007-1 and ISO 21007-2. The listing includes marks of existing gas cylinder manufacturers, as well as cylinder manufacturers which have ceased production in the past, but whose cylinders can still be in service today. NOTE It is intended to revise Annex A of this document from time to time to update the list of codes and identification marks of gas cylinder manufacturers in accordance with the progressing commercial and economic development in the cylinder manufacturing industry.

Status
Published
Publication Date
12-Nov-2026
Current Stage
6060 - International Standard published
Start Date
13-Nov-2026
Completion Date
13-Nov-2026

Buy Documents

Technical report

ISO/TR 17329:2026 - Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes

Release Date:13-Nov-2026
English language (30 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO/TR 17329:2026 is an ISO Technical Report published by ISO on gas cylinders and the identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes. It gives a practical inventory of manufacturer marks and RFID codes for use with ISO 21007-1 and ISO 21007-2. The document is intended for people who need to identify a cylinder maker, the manufacturing plant, and the related RFID code in traceability, approval, and inspection work.

What does ISO/TR 17329:2026 specify?

ISO/TR 17329:2026 specifies an inventory of gas cylinder manufacturer identification marks and their assigned RFID codes, as known at the time of publication. The list covers both manufacturers that are still producing cylinders and manufacturers whose cylinders can still remain in service even though production has stopped.

The document is organized into five clauses plus one informative annex and a bibliography:

  • Clause 1 - Scope
  • Clause 2 - Normative references
  • Clause 3 - Terms and definitions
  • Clause 4 - General
  • Clause 5 - Explanation of columns
  • Annex A - List of codes and identification marks for gas cylinder manufacturers

Annex A is the practical core of the document. It is presented as a country-based listing and is intended to be updated over time as manufacturer codes and marks change.

What are the key requirements of ISO/TR 17329:2026?

ISO/TR 17329:2026 is mainly a reference document, so its key points are about identification practice, code structure, and how to read the manufacturer list.

Identification and traceability

Clause 4 states that gas cylinders are generally marked with the manufacturer's identification - such as a name, trademark, or logo - to support traceability. For composite cylinders, labelling can be used instead of stamp marking. In practice, this means users should be able to connect a cylinder to the manufacturer and, where relevant, the manufacturing location.

Clause 4 also says that, when cylinders are identified by RFID, the technologies and codes of the ISO 21007 series are used. This matters because the document is not inventing a separate coding scheme - it ties the manufacturer list to the RFID system already used for cylinder identification.

How the RFID code is built

Clause 4 states that the first three digits of the RFID code are the country code from ISO 3166-1, and the next two digits are assigned consecutively within that country's list. Once assigned, the RFID code designation does not change. For users, this means the code is stable and can be used as a long-term reference when checking cylinder records or marking data.

Manufacturer marks and manufacturing locations

Clause 4 explains that the manufacturer mark should identify the manufacturing plant or facility unambiguously, because the approval of a cylinder is tied to that plant. The same manufacturer name may appear over time with different marks, and one manufacturer may also use alternative marks. In practice, this helps approval bodies and inspectors link a cylinder to the correct plant history, even when company names have changed.

What Annex A records

Clause 4 says Annex A lists manufacturers by country, including manufacturers that no longer produce cylinders. It also notes that the annex records when production at an old plant ends and when a new plant begins. This is important when a cylinder was made during a company transition and the mark needs to be interpreted against the correct production period.

How to read the columns

Clause 5 explains the meaning of the Annex A columns:

  • Code - the RFID code assigned to the manufacturer
  • Manufacturer name - the official name of the gas cylinder manufacturer
  • Location of manufacturing plant/facility - the plant responsible for manufacture and to which the mark is assigned
  • Year(s) of manufacture - the period when the mark was used, if known
  • Manufacturer's mark - the identification marked on the cylinder in the form specified by ISO 13769

This matters in practice because the annex is not just a name list - it is a lookup table for matching a mark, a code, a place, and a production period.

Time-limited inventory

Annex A states that the list is current as of 30 April 2024 and does not claim to be complete. It is meant to be revised from time to time. For users, this means the annex is a working reference for identification, not a permanent register.

What terms does ISO/TR 17329:2026 define?

Radio frequency identification (RFID) is the electronic identification method used in the ISO 21007 series to assign a code to a gas cylinder manufacturer.

Manufacturer's mark is the official identification placed on the cylinder, such as a stamp mark or label, that identifies the manufacturer.

Manufacturing plant/facility is the specific site responsible for making the cylinder and the site to which the mark is assigned.

Traceability is the ability to connect a cylinder back to its manufacturing origin using the manufacturer's identification.

Type approval is the approval linked to the cylinder and the plant that made it, so the mark needs to point to the correct manufacturing site.

ISO 3166-1 country code is the country identifier used at the start of the RFID code structure in Annex A.

Who uses ISO/TR 17329:2026?

ISO/TR 17329:2026 is intended for the gas cylinder manufacturing industry, approval authorities, inspection bodies, the gas industry, and related industry branches dealing with gas cylinders. These users need it to identify cylinder origin, check manufacturer marks, assign or verify RFID codes, and interpret cylinders that may have been made by older or renamed plants.

What changed in ISO/TR 17329:2026 from the previous edition?

ISO/TR 17329:2026 is the second edition and it cancels and replaces ISO/TR 17329:2015. The stated technical change is the removal of Annex B and Annex C.

Which standards are used with ISO/TR 17329:2026?

ISO/TR 17329:2026 is used together with ISO 21007-1 and ISO 21007-2, which provide the RFID identification architecture and numbering scheme for gas cylinders.

It also refers to ISO 3166-1 for the country codes used at the start of the RFID code, and to ISO 13769 for the cylinder stamp marking format referenced in the explanation of the manufacturer's mark.

What does the ISO/TR 17329:2026 document contain?

ISO/TR 17329:2026 contains one informative annex with a country-by-country list of manufacturer codes and identification marks. The annex records manufacturer names, plant locations, years of manufacture where known, and the mark or RFID code associated with each entry.

The document also includes a short set of explanatory clauses that tell the reader how the list is structured and how to interpret each column. In practice, that makes the report useful as a reference for marking checks, traceability reviews, and identity verification during manufacturing or inspection.

Relations

Effective Date
10-Feb-2024

Buy Documents

Technical report

ISO/TR 17329:2026 - Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes

Release Date:13-Nov-2026
English language (30 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

Institut za varilstvo d.o.o. (Welding Institute)

Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au

SA Slovenia Verified

Sponsored listings

Frequently Asked Questions

ISO/TR 17329:2026 is a technical report published by the International Organization for Standardization (ISO). Its full title is "Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes". This standard covers: This document provides an inventory, as far as known at time of publication, of manufacturer’s identification marks and their assigned radio frequency identification (RFID) codes according to ISO 21007-1 and ISO 21007-2. The listing includes marks of existing gas cylinder manufacturers, as well as cylinder manufacturers which have ceased production in the past, but whose cylinders can still be in service today. NOTE It is intended to revise Annex A of this document from time to time to update the list of codes and identification marks of gas cylinder manufacturers in accordance with the progressing commercial and economic development in the cylinder manufacturing industry.

This document provides an inventory, as far as known at time of publication, of manufacturer’s identification marks and their assigned radio frequency identification (RFID) codes according to ISO 21007-1 and ISO 21007-2. The listing includes marks of existing gas cylinder manufacturers, as well as cylinder manufacturers which have ceased production in the past, but whose cylinders can still be in service today. NOTE It is intended to revise Annex A of this document from time to time to update the list of codes and identification marks of gas cylinder manufacturers in accordance with the progressing commercial and economic development in the cylinder manufacturing industry.

ISO/TR 17329:2026 is classified under the following ICS (International Classification for Standards) categories: 23.020.35 - Gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/TR 17329:2026 has the following relationships with other standards: It is inter standard links to ISO/TR 17329:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO/TR 17329:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


Technical
Report
ISO/TR 17329
Second edition
Gas cylinders — Identification of
2026-11
gas cylinder manufacturer marks
and their assigned radio frequency
identification (RFID) codes
Bouteilles à gaz — Identification des marques de fabricant
de la bouteille de gaz et leurs codes d'identification (RFID) de
fréquences radio
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 1
5 Explanation of columns . 2
Annex A (informative) List of codes and identification marks for gas cylinder manufacturers. 3
Bibliography .30

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 4,
Operational requirements for gas cylinders.
This second edition cancels and replaces the first edition (ISO/TR 17329:2015), which has been technically
revised.
The main changes are as follows:
— Removal of Annex B and Annex C.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
The purpose of this document is to provide the gas cylinder manufacturing industry, the approval
authorities, the inspection bodies, the gas industry and all associated industry branches dealing with gas
cylinders a tool for identifying gas cylinders with their manufacturer’s marks and their assigned radio
frequency identification (RFID) codes.

v
Technical Report ISO/TR 17329:2026(en)
Gas cylinders — Identification of gas cylinder manufacturer
marks and their assigned radio frequency identification
(RFID) codes
1 Scope
This document provides an inventory, as far as known at time of publication, of manufacturer’s identification
marks and their assigned radio frequency identification (RFID) codes according to ISO 21007-1 and
ISO 21007-2. The listing includes marks of existing gas cylinder manufacturers, as well as cylinder
manufacturers which have ceased production in the past, but whose cylinders can still be in service today.
NOTE It is intended to revise Annex A of this document from time to time to update the list of codes and
identification marks of gas cylinder manufacturers in accordance with the progressing commercial and economic
development in the cylinder manufacturing industry.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 General
There is a general marking requirement by national or international regulations and standards to identify
gas cylinders with the cylinder manufacturer’s identification (name, trademark and/or logo), e.g. by stamp
marking, or for composite cylinders, by labelling, to guarantee their traceability. In certain circumstances,
it is very important to enable a distinctive identification of the origin of the cylinder. Normally for a given
manufacturer, the identification is specific to a manufacturing location.
When, in addition to the above marking requirements, the cylinders are identified by radio frequency
identification (RFID) codes, the technologies and RFID codes in accordance with ISO 21007 series are used.
The first three digits of the RFID codes listed in Column 1 of Annex A are the country code as listed in
ISO 3166-1. The subsequent two digits are assigned consecutively in the country's listing. Once assigned, the
RFID code designation does not change.
Annex A lists cylinder manufacturers by countries which are currently known to produce or have produced
gas cylinders. The list does not claim to be complete and is valid only as of the date of the publication of this
document. Manufacturers that no longer produce cylinders remain listed in Annex A as their cylinders can
still be in service and need to be identified.
It is expected that the manufacturers are using manufacturer’s marks which identify unambiguously the
manufacturing plant/facility to clearly identify the plant to which the type approval of the concerned
cylinder was assigned. Annex A indicates the date when the manufacturing at the old plant/facility ends
and the date when the new plant/facility begins manufacturing cylinders. Names of manufacturers can

have changed over time; however, these manufacturers can have continued using the same manufacturer’s
mark provided the approval criteria for the cylinders in question have not changed. Vice versa, a change
of the manufacturer’s mark can have taken place or alternative marks can be used by one and the same
manufacturer.
Clause 5 explains the information provided in each column of Annex A.
5 Explanation of columns
The column entitled “Code” designates the RFID code for a manufacturer.
The column entitled “Manufacturer name” designates the official name of the gas cylinder manufacturer.
The name can have changed over time.
The column entitled “Location of manufacturing plant/facility” designates the plant/facility responsible for
manufacturing and to which the mark is assigned.
The column entitled “Year(s) of manufacture” designates the years for which the manufacturer's mark(s)
were used, if known.
For example,
— “→ 1927” means the mark was used inclusive of 1927,
— “1927 → 1961” means the mark was used from some time in 1927 to some time during 1961, and
— “2002 →” means the mark has been used starting some time during 2002 to present.
The column entitled “Manufacturer's mark” provides the official manufacturer's identification that is
marked on the cylinder as specified by ISO 13769 (stamp marking 3 in ISO 13769:2018, Table 1).
Country: XXXXX
Location of Year(s) of manufacture Manufacturer's mark
Code Manufacturer name manufacturing
plant/facility
Annex A
(informative)
List of codes and identification marks for gas cylinder manufacturers
The following list does not claim to be complete and is current as of 30 April 2024.
Country: ALGERIA
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
F.E.R.A.P.
012 01 (Fabrication et entretien Algiers
de récipients à pression)
Country: ARGENTINA
Location of Year(s) of manufacture Manufacturer's mark
Code Manufacturer name manufacturing
plant/facility
032 01 L'Air Liquide Buenos Aires
1960 → 1985
032 02 Drago Buenos Aires 1938 →
032 03 Fabricacion Militar
032 04 Gas Carbonic Argentina
Gonzalez & Chiesa
032 05 Changed to Inflex San Luis 1967 →
Argentoil S.A.
032 06 Pablo Casale 1958 → 1986
032 07 Saravia Y Lopez Buenos Aires → 1993
032 08 Oxi — Luz
032 09 Acetylene Buenos Aires 1972 → 1992
032 10 Miguel Balbona
032 11 R. Batalles S.A. Buenos Aires 1944 →

Country: ARGENTINA
Location of Year(s) of manufacture Manufacturer's mark
Code Manufacturer name manufacturing
plant/facility
032 12 Propulsora San Luis San Luis
032 13 Luis Pasquinelli e Hijos Buenos Aires 1947 →
032 14 Kioshi Compresion Buenos Aires 2005 →
032 15 Mozart Buenos Aires 1995 →
032 16 INPROCIL S.A. Entre Rios 2007
032 17 CIDEGAS S.A. Buenos Aires 2004 →
Country: AUSTRALIA
Location of Year(s) of manufacture Manufacturer's mark
Code Manufacturer name manufacturing
plant/facility
Manchester Tank & Equip-
036 01 Echuca MANCHESTER
ment CO
036 02 CIG Gas Cylinders → 1996 CIG
036 03 Luxfer Gas Cylinders Sydney 1997 → 2004 LUXFER
Country: AUSTRIA
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
→ 1927
1927 → 1961
Jos. Heiser
Changed to Worthington 1961 → 1976
Heiser
040 01 Kienberg
Changed to Worthington
1976 → 2001
Cylinders GmbH Changed
to heiserTEC GmbH
2002 → 2026
Country: BELARUS
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
112 01 CYLINDERS BEL Orsha November 1, 2019 →
Country: BELGIUM
Location of
Code Manufacturer name manufacturing Year(s) of Manufacture Manufacturer's mark
plant/facility
S.A. Ateliers
Belges Réunis
056 01 La Dyle-Louvain → 1962
(formerly S.A. des
Ateliers de la Dyle)
056 02 Établissements Champy Antwerp → 1940
→ 1980
056 03 S.A. Comet Mechelen
→ 1980
S.A. Standard Van Leer
056 04 (formerly S.A. Usines Lierre
Standard)
S.A. Des Usines A Tubes de Flémalle-Haute
056 05
la Meuse (Liège)
Country: BRAZIL
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
076 01 Worthington Cylinders Itu 2002 → 2003
076 02 Worthington Tank Itu 2002 → 2003
076 03 MAT A/A São Paulo
Country: CANADA
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
Canadian Cylinder
124 01 Brantford, Ontario
Company, Ltd
Engineering Products
124 02 Boucherville, Québec
of Canada Ltd
E.P.C.L
Cap-de-la-Madeleine
124 03 Forges HPC Ltee
Québec
Hugh Canning Industries,
124 04 Toronto, Ontario
Inc.
Aircom Industries ('76)
124 05 Edmonton, Alberta M4803
Ltd
BRUIN
Bruin Engineered Parts,
124 06 Midland, Ontario
Inc.
M8802
Gas Cylinder
124 07 Tecumseh, Ontario M9001
Technologies
124 08 Kadet Engineering, Inc. Mississauga, Ontario KENG
Metal-Flo Corporation
124 09 Guelph, Ontario MFCCL
Canada Limited
Wolfedale Engineering,
124 10 Mississauga, Ontario → 2007 WENG or M8903
Ltd
→ 1996 SCM or M8004
Steel Cylinder
1996 → 2002 M8004
Manufacturing
124 11 Tilbury, Ontario
changed to
2002 → M8004 or
Worthington Cylinders
→ March 1, 2007 M5550
March 1, 2007 → M0501
Dynetek Industries Ltd.
124 12 changed to Calgary, Alberta
Luxfer Canada Limited
2018 →
NOTE This mark is ap-
plicable to Type 3 and 4
cylinders only.
Country: CHINA
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
Beijing Tianhai Industry
156 01 Beijing 1978 → JP
Co., Ltd.
Changzhou Aircraft Changzhou, Jiangsu
156 02 1980 → CAF
Manufacture Co., Ltd. Province
Chengdu Great High Pres- Chengdu, Sichuan
156 03 1978 → CG
sure Vessel Co., Ltd. Province
Chongqing Yifeng
156 04 High-pressure Container Chongqing 1987 → YM
Co., Ltd.
Juhua Group Corp- Quzhou, Zhejiang
156 05 2002 → JG
Engineering Co., Ltd. Province
Ningbo Meike Acetylene
156 06 Cicheng Town, Ningbo 1984 → NB
Cylinders Co., Ltd.
Shanghai Ronghua
156 07 High-Pressure Vessel Co., Shanghai 1979 → HT
Ltd.
Shanghai Huasheng Enter-
156 08 prises (Group) Shanghai 2002 → SG
Co., Ltd.
Tianjin Tianhai High Pres-
156 09 sure Container Tianjin 2003 → JP1
Co., Ltd.
Shanghai Tianhai Dekun
156 10 Composite Cylinders Shanghai 2005 → JP2
Co., Ltd.
Langfang Tianhai High
Langfang,
156 11 Pressure Container 2008 → JP3
Hebei Province
Co., Ltd.
2005 →
Luxfer Gas Cylinders
156 12 Shanghai
(Shanghai) Co. Ltd.
2018 →
NOTE This mark is ap-
plicable to Type 3 and 4
cylinders only.
Country: CROATIA
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
1972 → 2007
Djuro Djakovice Oour
891 01 Changed to Cilinder Slavonski Brod
Sistem D.o.o
2007 →
891 02 Slavonski Partizan Slavonski Brod 1956 → 1972
Country: CZECH REPUBLIC
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
Eisenwerke Podbrezová
203 01 1916 →
A.G.
1925 → 1928
1929 → 1938
Witkowitzer Bergbau und
1939 → 1991
Eisenhütten-
203 02 Gewerkschaft Ostrava-Vítkovice
Changed to VÍTKOVICE
1991 → 2016
CYLINDERS a.s.
2016 → 2018
2018 →
1992 → 1999 GTH
Gastec,
1999 → 2001 WGH
Changed to Worthington
203 03 Gastec Hustopece
Changed to Worthington
2002 →
Cylinders a.s.
203 04 Plynokov Brno JMP BRNO
KAYSER
203 05 KAYSER Moravská Třebová 2004 →

Country: DENMARK
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
208 01 Brdr. Degn Besser → 1973
208 02 Cylindric Denmark A/S Bieghusvej
→ 1973
208 03 Dalso Maskinfabrik A/S Langedalsvej
→ 1973
208 04 Kosan Cylindric Middelfart
208 05 Metal Møller Hadsten
Country: FINLAND
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
246 01 Mekes Oy Parkano 1964 → 1967
246 02 Mkt — Tehtaat Oy 00700 — Helsinki 70 04/1958 →
246 03 Oy Vähäsilta Ab 21530 — Paimio 1975 →
246 04 Oy Wärtsilä Ab Helsinki 13/08/1958 → 1973
Country: FRANCE
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
250 01 Brunon Vallette & Cie Rive-de-Gier → 1962
Établissements
250 02 Freudenberg et Sté de Region 75 — Paris 1945 → 1950
Fabrication de Bouteilles
Établissements
250 03 Region 2 — Crouy
Pecquet-Tesson
Region 69 — Mions 1983 → 2007
Region 59 —
250 04 Établissements Roth Wignehies
Region 92 — Co-
1972 →
lombes
S.A. des Anciens
250 05 Region 93 — Pantin 1920 →
Établissements Poulet
250 06 Société d'Escaut et Meuse Region 59 — Anzin
Société de Forgeage de Region 42 — Rive-de-
250 07 1962 →
Rive-de-Gier Gier
250 08 Sociéte Lorraine-Escaut Region 59 — Anzin

Country: FRANCE
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
Société Louvroil — Mont- Region 21 —
250 09 → 1945
bard — Aulnoye Montbard
→ 1989
→ 2005
1989 → 2005 SMG
2005 → 2019 LUXFER
Société Métallurgique
2005 → 2018
de Gerzat
250 10 Region 63 — Gerzat
Changed to Luxfer Gas
NOTE This mark is appli-
Cylinders, France
cable to Type 3 cylinders
only.
2018 → 2019
NOTE This mark is appli-
cable to Type 3 cylinders
only.
250 11 Société Olaer Region 69 — Mions 1976 → 1983
La Soudure Autogène Region 60 —
250 12 1920 → 1940
Française Pont-Ste-Maxence
Region 59 —
1945 → 1963
Louvroil
250 13 Vallourec
Region 21 —
→ 1945
Montbard
Region 59 — Aulnoye
Country: FRANCE
Location of
Code Manufacturer name manufacturing Year(s) of manufacture Manufacturer's mark
plant/facility
1961 → 2020 SCHNEIDER
Schneider (GLI) changed
1991 →
Region 67 —
250 14 to CHEMET GLI SAS in
Bischwiller
1961 → 2020 SCHNEIDER BISCH
2020 → CHEMET GLI
CB Moulins
250 15 Region 3 — Moulins 1990 CB MOULINS
Chevalier Bertrand
→ 1980 SMLF
Region 37 — St Pierre
250 16 Liotard
d
...