Abstract

This document specifies the basic dimensions and tolerances, in millimetres, of trombone head punches. This document gives examples of materials and their hardness and specifies the designation of punches. These punches are available with shank diameters, D, from 4 mm to 20 mm. The main use of the punches specified in this document is for punching holes in steel sheets. They can also be used for punching in other materials.

Status
Published
Publication Date
16-Nov-2026
Current Stage
6060 - International Standard published
Start Date
17-Nov-2026
Completion Date
17-Nov-2026

Buy Documents

Standard

ISO 24987:2026 - Tools for pressing — Trombone head punches

Release Date:17-Nov-2026
English language (13 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 24987:2026 - Outillage de presse — Poinçons tulipes

Release Date:17-Nov-2026
French language (13 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO 24987:2026 is an International Standard published by ISO for trombone head punches used in pressing tools. It specifies basic dimensions and tolerances, examples of materials and hardness, and the designation system for punches used mainly to punch holes in steel sheets.

What does ISO 24987:2026 specify?

ISO 24987:2026 specifies trombone head punches with shank diameters from 4 mm to 20 mm, together with their dimensions, tolerances, material examples, hardness examples, and naming rules. The document is organized into scope, normative references, terms and definitions, dimensions, material and hardness, designation, and a normative annex for the setting-up system.

AnnexWhat it covers
Annex ASetting up system for trombone head punches, including the seat, mounting, milling tool, and designation

The scope also makes clear that the punches are mainly for punching holes in steel sheets, while other materials are also possible in use. For a buyer or tool designer, that means the standard is about the geometry and identification of the tool, not about the punching process itself.

What are the key requirements of ISO 24987:2026?

ISO 24987:2026 sets out the standard shapes, sizes, and identification details for trombone head punches. The most important practical point is that the document lets users choose a punch type and then match it to the required shank diameter, point shape, length, and material designation.

Punch types and dimensions

ISO 24987:2026 covers perforating punches and punches with ejector, each in straight-shank and reduced-shank forms. The types include A, B, BS, BR, BO, C, D, DS, DR, and DO, with figures and tables giving the corresponding dimensions. In practice, this helps designers and purchasers specify a punch that fits the press tool and the intended hole shape.

The standard also distinguishes between round, square, rectangular, and oblong point shapes. For types with reduced shank or ejector, the document gives the shape-dependent dimensions and, where applicable, the position of the location device at 0° or 90°. That matters because the punch must align correctly in the holder and in the tool stack.

Tolerances and referenced tolerance class

For several reduced-shank types, ISO 24987:2026 refers to ISO 2768-m for general tolerances. This means the user should apply the general dimensional tolerance class named in the document rather than inventing separate tolerances. That is important when checking conformity on the shop floor or in incoming inspection.

Material and hardness

ISO 24987:2026 leaves the material to the manufacturer's discretion, but it gives example materials and hardness values for the point and head. The examples are alloyed cold work steel with 5 % to 12 % Cr and high speed steel. For users, this provides a practical basis for selecting a punch material suited to wear, service life, and the application.

Designation rules

ISO 24987:2026 requires a punch designation to include the product name, the standard reference, the type, shank diameter, applicable point dimensions, location device angle where relevant, overall length, and material. This makes ordering and drawing specifications unambiguous, which reduces the risk of receiving the wrong punch variant.

Setting-up system

Annex A gives the setting-up system for trombone head punches. It covers the seat dimensions, mounting thickness relationship, material examples, and the milling tool used to machine the retainer shape. For manufacturers and toolmakers, Annex A is the practical interface between the punch and the holder system.

What terms does ISO 24987:2026 define?

ISO 24987:2026 uses the terms and definitions from ISO 8695 for punches and related terminology. A few key terms used in the document are:

  • Trombone head punch - the press tool covered by this standard, identified by its shank, point shape, and length.
  • Perforating punch - a punch intended to make holes in workpieces.
  • Ejector - a feature that helps remove the punched material from the punch area.
  • Location device - the positioning feature used for the BS, BR, BO, DS, DR, and DO types.
  • Seat for trombone head punches - the holder seat described in Annex A for mounting the punch.
  • Shank diameter, D - the diameter used to identify the punch size.
  • Overall length, L - the total length used in the designation and dimensional tables.

Who uses ISO 24987:2026?

ISO 24987:2026 is used by press tool designers, punch manufacturers, toolmakers, production engineers, and quality inspectors. It is also relevant to buyers and technical purchasers who need to specify a trombone head punch for sheet metal tooling.

In practice, users rely on the standard when designing tooling, ordering punches, checking interchangeability, and verifying dimensions on received parts. It is especially relevant for work involving punching holes in steel sheets.

What changed in ISO 24987:2026 from the previous edition?

ISO 24987:2026 is the first edition.

Which standards are used with ISO 24987:2026?

ISO 24987:2026 refers to ISO 2768 for general dimensional tolerances and to ISO 8695 for nomenclature and terminology for punches. ISO 2768 contributes the tolerance class used for several dimensions, while ISO 8695 supplies the terms and definitions used throughout the document.

What does the ISO 24987:2026 document contain?

ISO 24987:2026 contains figures and tables for the main punch types, including straight-shank and reduced-shank versions, with and without ejectors. It also contains a material and hardness section, a designation clause, and a normative annex on the setting-up system.

Annex A includes a seat design, a mounting relationship, and a milling tool for machining the retainer shape. The annex also gives designation examples for both the seat and the milling tool, which supports tooling design and manufacture.

The bibliography points to ISO 21920-1 for surface texture indication and EN ISO 4957 for tool steels. These references help users connect the punch specification with surface finish and steel material selection when needed.

Buy Documents

Standard

ISO 24987:2026 - Tools for pressing — Trombone head punches

Release Date:17-Nov-2026
English language (13 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 24987:2026 - Outillage de presse — Poinçons tulipes

Release Date:17-Nov-2026
French language (13 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified

CARES (UK Certification Authority for Reinforcing Steels)

UK certification for reinforcing steels and construction.

UKAS United Kingdom Verified

EWF/IIW (European/International Welding Federation)

International welding personnel certification.

BELAC Belgium Verified

Sponsored listings

Frequently Asked Questions

ISO 24987:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tools for pressing — Trombone head punches". This standard covers: This document specifies the basic dimensions and tolerances, in millimetres, of trombone head punches. This document gives examples of materials and their hardness and specifies the designation of punches. These punches are available with shank diameters, D, from 4 mm to 20 mm. The main use of the punches specified in this document is for punching holes in steel sheets. They can also be used for punching in other materials.

This document specifies the basic dimensions and tolerances, in millimetres, of trombone head punches. This document gives examples of materials and their hardness and specifies the designation of punches. These punches are available with shank diameters, D, from 4 mm to 20 mm. The main use of the punches specified in this document is for punching holes in steel sheets. They can also be used for punching in other materials.

ISO 24987:2026 is classified under the following ICS (International Classification for Standards) categories: 25.120.10 - Forging equipment. Presses. Shears. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 24987:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 24987
First edition
Tools for pressing — Trombone
2026-11
head punches
Outillage de presse — Poinçons tulipes
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 1
4.1 Perforating punches .1
4.1.1 Punches with straight shank – Type A .1
4.1.2 Punches with reduced shank .2
4.2 Punches with ejector .4
4.2.1 Punches with ejector with straight shank – Type C.4
4.2.2 Punches with ejector with reduced shank .5
5 Material and hardness . 7
6 Designation . 7
Annex A (normative) Setting up system . 9
Bibliography .13

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for
pressing and moulding.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
International Standard ISO 24987:2026(en)
Tools for pressing — Trombone head punches
1 Scope
This document specifies the basic dimensions and tolerances, in millimetres, of trombone head punches.
This document gives examples of materials and their hardness and specifies the designation of punches.
These punches are available with shank diameters, D, from 4 mm to 20 mm.
The main use of the punches specified in this document is for punching holes in steel sheets. They can also
be used for punching in other materials.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 2768, Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general
specification of linear and angular sizes
ISO 8695, Tools for pressing — Punches — Nomenclature and terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8695 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Dimensions
4.1 Perforating punches
4.1.1 Punches with straight shank – Type A
The dimensions of punches with straight shank, type A, shall be in accordance with the indications of
Figure 1 and Table 1.
Figure 1 — Punches with straight shank – Type A
Table 1 — Dimensions of punches with straight shank – Type A
D D H k f r L
h6 0 02, +01, 0 05,
0 0 0
01, 02,
mm mm mm mm ° mm mm
71 80 100
4 5,5 20 8 × × ×
5 7 15 × × ×
6 9 20 × × ×
8 11 30 12 × × ×
4 1,5
10 14 35 × × ×
13 17 × × ×
16 20 40 × × ×
20 25 × × ×
Key
× standardized dimensions
4.1.2 Punches with reduced shank
4.1.2.1 Punches with round shape – Type B
The dimensions of punches with round shape, type B, shall be in accordance with the indications of Figure 2
and Table 2. The general tolerance shall be ISO 2768-m in accordance with ISO 2768.
General tolerance: ISO 2768-m
Figure 2 — Punches with round shape – Type B
...


Norme
internationale
ISO 24987
Première édition
Outillage de presse — Poinçons
2026-11
tulipes
Tools for pressing — Trombone head punches
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2026
Tous droits réservés.
La présente publication de l’ISO est protégée par le droit d’auteur et demeure la propriété de l’ISO et/ou de ses concédants de
licence.
Le contenu de la présente publication de l’ISO est fourni sous licence, et n’est pas vendu. Son utilisation est soumise aux conditions
de licence applicables définies par l’ISO, un organisme membre de l’ISO, ou un distributeur tiers agréé.
Sous réserve des besoins liés à sa mise en œuvre ou d’une autorisation expresse prévue aux termes d’une licence distincte, aucune
partie de la présente publication de l’ISO ne peut être reproduite, distribuée, modifiée, utilisée ou mise à disposition sous quelque
forme ou par quelque moyen que ce soit – électronique ou mécanique, y compris la photocopie, la numérisation, l’enregistrement
ou la publication sur des plateformes numériques internes ou externes.
Toute utilisation hors du champ d’application des droits accordés est interdite et peut donner lieu à des poursuites judiciaires.
ISO copyright office
Case postale 401 • CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Dimensions . 1
4.1 Poinçons de découpe .1
4.1.1 Poinçons à corps droit – Type A .1
4.1.2 Poinçons à corps épaulé .2
4.2 Poinçons avec éjecteur .4
4.2.1 Poinçons avec éjecteur à corps droit – Type C .4
4.2.2 Poinçons avec éjecteur à corps épaulé .5
5 Matériau et dureté . 7
6 Désignation . 7
Annexe A (normative) Système d'implantation . 9
Bibliographie .13

iii
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l'élaboration du
document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de brevets reçues par l'ISO
(voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant: www.iso.org/iso/fr/avant-propos.html.
Le présent document a été élaboré par le comité technique ISO/TC 29, Petit outillage, sous-comité SC 8,
Outillage de presse et de moulage.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.

iv
Norme internationale ISO 24987:2026(fr)
Outillage de presse — Poinçons tulipes
1 Domaine d’application
Le présent document spécifie les dimensions et tolérances de base, en millimètres, des poinçons tulipes.
Le présent document donne des exemples de matériaux et de leur dureté, et spécifie la désignation des
poinçons. Ces poinçons sont disponibles en diamètres de corps D allant de 4 mm à 20 mm.
Les poinçons spécifiés dans le présent document sont principalment utilisés pour percer des trous dans les
tôles d'acier. Ils peuvent également être utilisés pour le poinçonnage d'autres matériaux.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique. Pour
les références non datées, la dernière édition du document de référence s'applique (y compris les éventuels
amendements).
ISO 2768, Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Limites de tolérance
pour la spécification générale des tailles linéaires et angulaires
ISO 8695, Outillage de presse — Poinçons — Nomenclature et terminologie
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions de l'ISO 8695 ainsi que les suivants
s'appliquent.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en normalisation,
consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l’adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l’adresse https:// www .electropedia .org/
4 Dimensions
4.1 Poinçons de découpe
4.1.1 Poinçons à corps droit – Type A
Les dimensions des poinçons à corps droit, de type A, doivent être conformes aux indications de la Figure 1
et du Tableau 1.
Figure 1 — Poinçons à corps droit – Type A
Tableau 1 — Dimensions des poinçons à corps droit – Type A
D D H k f r L
+05,
h6 0 +02, +01, 0
0 0
−01, −02,
mm mm mm mm ° mm mm
71 80 100
4 5,5 20 8 × × ×
5 7 15 × × ×
6 9 20 × × ×
8 11 30 12 × × ×
4 1,5
10 14 35 × × ×
13 17 × × ×
16 20 40 × × ×
20 25 × × ×
Légende
× dimensions normalisées
4.1.2 Poinçons à corps épaulé
4.1.2.1 Poinçons de forme ronde – Type B
Les dimensions des poinçons de forme ronde, de type B, doivent être conformes aux indications de la Figure 2
et du Tableau 2. La tolérance générale applicable doit être l
...