ISO/TS 10303-5001:2010

TECHNICAL ISO/TS
SPECIFICATION 10303-5001
First edition
2010-11-15
Industrial automation systems and
integration — Product data
representation and exchange —
Part 5001:
Guidance on the usage of ISO 10303-214
for gear units
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 5001: Directives relatives à l'utilisation de l'ISO 10303-214 pour
les transmissions à engrenages

Reference number
©
ISO 2010
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

Contents Page
Foreword .viii
Introduction.ix
1 Scope.1
2 Normative references.3
3 Terms, definitions and abbreviated terms.3
3.1 Terms defined in ISO 10303-1 .3
3.2 Abbreviated terms.3
4 Information requirements.4
4.1 Preliminary elements .4
4.2 Application objects.4
4.2.1 Application_context .4
4.2.2 Application_property.5
4.2.3 Assembly_definition .5
4.2.4 Assembly_relationship.5
4.2.5 Baseplate.6
4.2.6 Basic_material.6
4.2.7 Bearing .6
4.2.8 Bearing_bearing.7
4.2.9 Belt_or_chain.7
4.2.10 Bevel_or_hypoid_gear.7
4.2.11 Bevel_or_hypoid_gear_pair .7
4.2.12 Clutch_or_brake.7
4.2.13 Coordinate_definition.8
4.2.14 Coupling.8
4.2.15 Crossed_helical_gear .8
4.2.16 Crossed_helical_gear_pair.8
4.2.17 Cylindrical_gear.8
4.2.18 Cylindrical_gear_pair.9
4.2.19 Data_environment.9
4.2.20 Deformation_shift_bending.9
4.2.21 Direction_definition.9
4.2.22 Document_assignment.10
4.2.23 Dynamic.11
4.2.24 Efficiency_loss .11
4.2.25 Environment.11
4.2.26 External_geometric_model.11
4.2.27 Fit_of_key_assembly .11
4.2.28 Fitting_key.12
4.2.29 Functional_relationship.12
4.2.30 Gear.12
4.2.31 Gear_pair.12
4.2.32 Gear_unit.13
4.2.33 General_gear_pair.13
4.2.34 General_property.13
4.2.35 Geometric_model.14
4.2.36 Geometry_property.14
4.2.37 Hardness.15
4.2.38 Housing.15
4.2.39 Housing_baseplate.16
4.2.40 Housing_bearing .16
4.2.41 Housing_clutch_or_brake.16
4.2.42 Housing_coupling .16
4.2.43 Housing_sealing .17
4.2.44 Interference_fit_assembly.17
4.2.45 Life_time.17
4.2.46 Load_capacity.17
4.2.47 Lubricant.17
4.2.48 Lubricant_definition.18
4.2.49 Lubricant_part.18
4.2.50 Manufacturing.18
4.2.51 Material_definition .18
4.2.52 Material_part.19
4.2.53 Material_property.19
4.2.54 Material_property_association.19
4.2.55 Material_property_value_definition .19
4.2.56 Mesh.20
4.2.57 Numerical_value .20
4.2.58 Parameter_property.20
4.2.59 Part.21
4.2.60 Partial_document_assignment.21
4.2.61 Partial_part_shape_definition .22
4.2.62 Part_definition.24
4.2.63 Part_definition_relationship.24
4.2.64 Part_instance.25
4.2.65 Part_shape_definition.25
4.2.66 Part_version .26
4.2.67 Pinion_shaft.26
4.2.68 Placement_reference_relationship .26
4.2.69 Placement_relationship.27
4.2.70 Plain_bearing.27
4.2.71 Planetary_gear_train.27
4.2.72 Position_orientation_property .27
4.2.73 Position_
...