Abstract

This document specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply. It does not apply to chemical service glass-enamel and apparatus enamel.

Status
Not Published
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
04-Nov-2026
Completion Date
07-Nov-2026

Buy Documents

Draft

ISO/PRF 11177 - Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Release Date:04-Nov-2026
English language (5 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/PRF 11177 - Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Release Date:04-Nov-2026
English language (5 pages)
sale 15% off
sale 15% off

Relations

Effective Date
12-Feb-2026
Effective Date
01-Feb-2025

Buy Documents

Draft

ISO/PRF 11177 - Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Release Date:04-Nov-2026
English language (5 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/PRF 11177 - Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Release Date:04-Nov-2026
English language (5 pages)
sale 15% off
sale 15% off

Get Certified

Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)

German Institute for Building Technology.

DAKKS Germany Verified

DIN CERTCO

DIN Group product certification.

DAKKS Germany Verified

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified

Sponsored listings

Frequently Asked Questions

ISO/PRF 11177 is a draft published by the International Organization for Standardization (ISO). Its full title is "Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing". This standard covers: This document specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply. It does not apply to chemical service glass-enamel and apparatus enamel.

This document specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply. It does not apply to chemical service glass-enamel and apparatus enamel.

ISO/PRF 11177 is classified under the following ICS (International Classification for Standards) categories: 25.220.50 - Enamels; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/PRF 11177 has the following relationships with other standards: It is inter standard links to prEN ISO 11177, ISO 11177:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO/PRF 11177 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 11177
Third edition
Vitreous and porcelain enamels —
Inside and outside enamelled
valves and pressure pipe fittings for
untreated and potable water supply
— Quality requirements and testing
Émaux vitrifiés — Robinetterie et raccords de tuyauterie pour
conduites forcées émaillés à l’intérieur et à l’extérieur destinés à
l’alimentation en eau non traitée et en eau potable — Exigences
de qualité et essais
PROOF/ÉPREUVE
Reference number
ISO 11177:2026(en) © ISO 2026
ISO 11177:2026(en)
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
ii
ISO 11177:2026(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Sampling . 2
5 Quality requirements and testing procedures . 2
5.1 Enamelling surface quality .2
5.2 Coat thickness .2
5.3 Hardness .2
5.4 Resistance to thermal shock .2
5.5 Corrosion resistance to water and steam .3
5.6 Corrosion resistance to citric acid .3
5.7 Corrosion and chemical resistance to acid soil .3
5.8 Corrosion and chemical resistance to sub-surface migration of enamel after impact test .3
5.9 Corrosion resistance after scratch damage .4
5.10 Corrosion resistance after abrasion damage .4
5.11 Resistance to climatic exposure and ultraviolet radiation .4
5.12 Physiological harmlessness .5
5.13 Durability and sustainability .5
6 Test report . 5
PROOF/ÉPREUVE
iii
ISO 11177:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings,
in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
262, Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals
and alloys, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This third edition cancels and replaces the second edition (ISO 11177:2019), which has been technically
revised.
The main changes are as follows:
— the normative references have been updated;
— the terms and definitions have been updated:
— the coating thickness specification has been redefined;
— the frequency of testing for the quality requirements has been specified.
— a new clause has been added on durability and sustainability.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
PROOF/ÉPREUVE
iv
ISO 11177:2026(en)
Introduction
The requirements specified in this document regarding the product quality of enamelled valves and pressure
pipe fittings for untreated and potable water supply take into account the real stress conditions to which a
component can be subjected in the course of its operating life.
Typical types of stress are:
— during storage: climate, UV radiation, mechanical stress;
— during transportation: mechanical stress, e.g. at certain points (impact), laterally (friction);
— during preparation for installation: cleaning agents, mechanical stress, e.g. at certain points (impact),
laterally (friction);
— during installation: mechanical stress;
— during operation: abrasion caused by the carried medium, corrosion from surrounding medium,
mechanical stress from shifting ground loads, UV radiation with valves built in above ground.
PROOF/ÉPREUVE
v
International Standard ISO 11177:2026(en)
Vitreous and porcelain enamels — Inside and outside
enamelled valves and pressure pipe fittings for untreated and
potable water supply — Quality requirements and testing
1 Scope
This document specifies the requirements for product quality and product testing of enamelled valves and
pressure pipe fittings for untreated and potable water supply.
This document does not apply to chemical service glass-enamel and apparatus enamel.
2 Normative referen
...


Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
23 July 2026 Style Definition
...
Style Definition
...
ISO /PRF 11177:2026(en)
Style Definition
...
Style Definition
...
ISO/TC 107/SC /WG
Style Definition
...
Style Definition
Secretariat: KATS .
Style Definition
...
Date: 2026-11-04
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Vitreous and porcelain enamels — Inside and outside enamelled
Style Definition
...
valves and pressure pipe fittings for untreated and potable water
Style Definition
...
supply — Quality requirements and testing
Style Definition
...
Style Definition
...
Émaux vitrifiés — Robinetterie et raccords de tuyauterie pour conduites forcées émaillés à l’intérieur et à
Style Definition
l’extérieur destinés à l’alimentation en eau non traitée et en eau potable — Exigences de qualité et essais .
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
St l D fi iti
© PROOF
ISO/DIS PRF 11177(E:2026(en) Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: HeaderCentered, Space After: 0 pt
© ISO 2026
Formatted: Default Paragraph Font
All rights reserved. Unless otherwise specified,
Formatted: Default Paragraph Font
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
Formatted: Adjust space between Latin and Asian text,
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued
Adjust space between Asian text and numbers
by ISO, an ISO member body, or an authorized third-party distributor.
Formatted: Left: 1.5 cm, Right: 1.5 cm, Gutter: 0 cm,
Except as required in the context of its for implementation or expressly permitted by a separate licence, no part of this
Header distance from edge: 1.27 cm
ISO publication may be reproduced or utilized otherwise, distributed, modified, used, or made available in any form or
by any means, – electronic or mechanical, including photocopying, scanning, recording, or posting on internal or external
digital platforms.
Any use beyond the internet or an intranet, without prior written permission. Permission can be requested from either
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
ISO at the address below or ISO's member body in the countryscope of the requestergranted rights is prohibited and may
result in legal action.
ISO Copyright Officecopyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11 Formatted: English (United Kingdom)
Fax: + 41 22 749 09 47
Email: copyright@iso.org
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii
Formatted: Font: 11 pt, Bold
Formatted: Font: Bold
Contents Page Formatted: HeaderCentered, Left, Space After: 0 pt
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers, Tab stops: Not
Foreword . iv
at 0.71 cm + 17.2 cm
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Sampling . 2
5 Quality requirements and testing procedures . 2
5.1 Enamelling surface quality . 2
5.2 Coat thickness . 2
5.3 Hardness . 3
5.4 Resistance to thermal shock . 3
5.5 Corrosion resistance to water and steam . 3
5.6 Corrosion resistance to citric acid . 3
5.7 Corrosion and chemical resistance to acid soil . 3
5.8 Corrosion and chemical resistance to sub-surface migration of enamel after impact test . 4
5.9 Corrosion resistance after scratch damage . 4
5.10 Corrosion resistance after abrasion damage . 4
5.11 Resistance to climatic exposure and ultraviolet radiation . 5
5.12 Physiological harmlessness . 5
5.13 Durability and sustainability . 5
6 Test report . 5

Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Sampling . 2
5 Quality requirements and testing procedures . 2
5.1 Enamelling surface quality . 2
5.2 Coat thickness . 2
5.3 Hardness . 2
5.4 Resistance to thermal shock . 3
5.5 Corrosion resistance to water and steam . 3
5.6 Corrosion resistance to citric acid . 3
5.7 Corrosion and chemical resistance to acid soil . 3
5.8 Corrosion and chemical resistance to sub-surface migration of enamel after impact test . 3
5.9 Corrosion resistance after scratch damage . 4
5.10 Corrosion resistance after abrasion damage . 4
5.11 Resistance to climatic exposure and ultraviolet radiation . 4 Formatted: Font: 10 pt
5.12 Physiological harmlessness . 5
Formatted: Font: 10 pt
5.13 Durability and sustainability . 5
Formatted: Font: 10 pt
6 Test report . 5
Formatted: FooterCentered, Left, Space Before: 0 pt, Tab
stops: Not at 17.2 cm
Formatted: Font: 11 pt
© ISO 2026 – All rights reserved
iii
ISO/DIS PRF 11177(E:2026(en) Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Foreword Formatted: HeaderCentered, Space After: 0 pt
Formatted: Adjust space between Latin and Asian text,
ISO (the International Organization for Standardization) is a worldwide federation of national standards Adjust space between Asian text and numbers
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives). Formatted: English (United Kingdom)
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for identifying any or all such
patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html. Formatted: English (United Kingdom)
This document was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings., in Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 262,
Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and
alloys, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Formatted: Default Paragraph Font
This third edition cancels and replaces the second edition (ISO 11177:2019), which has been technically
revised.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
The main changes are as follows:
— — the normative references have been updated; Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers, Tab stops: Not
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
— — the terms and definitions have been updated:
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
— — the coating thickness specification has been redefined;
— — the frequency of testing for the quality requirements has been specified.
— — a new clause has been added on durability and sustainability.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html.
iv
Formatted: Font: 11 pt, Bold
Formatted: Font: Bold
Formatted: HeaderCentered, Left, Space After: 0 pt
Introduction
The requirements specified in this document regarding the product quality of enamelled valves and pressure
pipe fittings for untreated and potable water supply take into account the real stress conditions to which a
component can be subjected in the course of its operating life. Typical types of stress are:
Typical types of stress are:—
Formatted: Adjust space between Latin and Asian text,
— during storage: climate, UV radiation, mechanical stress;
Adjust space between Asian text and numbers, Tab stops: Not
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
— — during transportation: mechanical stress, e.g. at certain points (impact), laterally (friction);
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
— — during preparation for installation: cleaning agents, mechanical stress, e.g. at certain points (impact),
laterally (friction);
— — during installation: mechanical stress;
— — during operation: abrasion caused by the carried medium, corrosion from surrounding medium,
mechanical stress from shifting ground loads, UV radiation with valves built in above ground.
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: FooterCentered, Left, Space Before: 0 pt, Tab
stops: Not at 17.2 cm
Formatted: Font: 11 pt
© ISO 2026 – All rights reserved
v
International Standard ISO 11177:2026(en)
Formatted
...
Formatted
...
Formatted
Vitreous and porcelain enamels — Inside and outside enamelled .
Formatted
...
valves and pressure pipe fittings for untreated and potable water
Formatted
...
supply — Quality requirements and testing
Formatted
...
Formatted
...
1 Scope
Formatted
...
Formatted
This document specifies the requirements for product quality and product testing of enamelled valves and
...
pressure pipe fittings for untreated and potable water supply. Formatted
...
Formatted
...
ItThis document does not apply to chemical service glass-enamel and apparatus enamel.
Formatted
...
Formatted
...
2 Normative references
Formatted
...
Formatted
The following documents are referred to in the text in such a way that some or all of their content constitutes .
requirements of this document. For dated references, only the edition cited applies. For undated references,
Formatted
...
the latest edition of the referenced document (including any amendments) applies.
Formatted
...
Formatted
...
ISO 2178, Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic
Formatted
...
method
F
...