Abstract

This document defines the terms for the forensic reporting on human identification by dental evidence.

Status
Published
Publication Date
12-Nov-2026
Technical Committee
ISO/TC 106/SC 3 - Terminology
Current Stage
6060 - International Standard published
Start Date
13-Nov-2026
Completion Date
13-Nov-2026

Buy Documents

Standard

ISO 21611:2026 - Dentistry — Vocabulary for source conclusion for human identification by dental evidence

Release Date:13-Nov-2026
English language (2 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 21611:2026 - Médecine bucco-dentaire — Vocabulaire relatif aux conclusions tirées de sources pour l'identification des personnes à l'aide de preuves dentaires

Release Date:13-Nov-2026
French language (3 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO 21611:2026 is an International Standard from ISO that defines vocabulary for source conclusion in human identification by dental evidence. It gives forensic odontologists, report writers, and reviewers a common language for describing how dental comparisons support identification, exclusion, or an inconclusive result.

What does ISO 21611:2026 specify?

ISO 21611:2026 specifies the terms used for forensic reporting on human identification by dental evidence. Its focus is terminology, so it standardizes how conclusions are expressed rather than setting test methods or casework procedures.

The document is organized into Clause 1 Scope, Clause 2 Normative references, and Clause 3 Terms and definitions. Clause 3 is split into general terms in 3.1 and terms related to qualitative expression of source conclusion in human identification by dental evidence in 3.2. An index closes the document and helps readers find each defined term quickly.

What are the key requirements of ISO 21611:2026?

ISO 21611:2026 is a vocabulary standard, so its technical content is the set of defined terms used in forensic odontology. The important practical point is that the standard gives a shared wording for describing comparisons between dental sources and the resulting conclusion.

Core source terms

  • Source in Clause 3.1.1 is the full collection of an individual's dental data used for identification. In practice, this is the reference set an expert compares against another source.
  • Concordant feature in 3.1.2 is an individual's unique oro-dental feature that can support identification. The note states that comparing dental features does not require any fixed minimum number of concordant points to conclude identification established, which matters because the judgment is qualitative rather than count-based.
  • Unique concordant characteristic in 3.1.3 describes distinctive or unusual features present in two sources that are highly unlikely to appear elsewhere. This helps an expert explain why a match is stronger than a simple visual similarity.
  • Concordant tooth in 3.1.5 is a tooth or representation that matches another representation and has no unexplained discrepancies. The note allows explainable discrepancies, so the reader must separate normal variation or known effects from true conflict.
  • Contextual evidence in 3.1.6 is information from the setting of an event or object that helps the source conclusion. In practice, this can narrow the set of plausible sources when the dental comparison alone is not fully distinctive.
  • Explainable discrepancy in 3.1.7 covers differences that can be justified by known factors. This matters because not every difference invalidates the comparison.
  • Unexplainable discrepancy in 3.1.8 is a difference that cannot be justified. This is the key reason a source may be excluded.

Source conclusion terms

  • Lack of evidentiary quality for comparison in 3.2.1 applies when one or both sources are too limited in quality or quantity to compare. This tells the user that the problem is the evidence base, not the conclusion itself.
  • Identification established in 3.2.2 means there are no unexplainable discrepancies and there is strong agreement in concordant characteristics. In practice, the conclusion is that the two sources originate from the same source.
  • Identity not excluded in 3.2.3 means there are no unexplainable discrepancies, but the shared characteristics are not distinctive enough to rule in a unique source with certainty. The standard then distinguishes identity probable and identity possible.
  • Inconclusive in 3.2.4 means there are no unexplainable discrepancies, but there are not enough unique concordant characteristics to make a determination. This is the wording to use when the comparison does not support a firm conclusion either way.
  • Identity excluded in 3.2.5 means the comparison reveals unexplainable discrepancies that cannot be attributed to flawed data. This is the term for a negative source conclusion.

What terms does ISO 21611:2026 define?

ISO 21611:2026 defines the language used in dental source conclusion reporting. The most useful terms are:

  • Source - the dental data set used as the basis for identification.
  • Concordant feature - a recognizable oro-dental feature that supports identification.
  • Concordant tooth - a tooth or representation that matches another source without unexplained conflict.
  • Contextual evidence - surrounding information that helps narrow the source conclusion.
  • Identification established - a positive conclusion based on strong agreement and no unexplainable discrepancies.
  • Identity not excluded - a conclusion that the source cannot be ruled out.
  • Identity excluded - a conclusion that the comparison shows incompatible differences.

Who uses ISO 21611:2026?

ISO 21611:2026 is used by forensic odontologists and other professionals who prepare, review, or interpret dental identification reports. It is also relevant to laboratories and legal authorities that need consistent wording for human identification findings based on dental evidence.

The document supports communication across different legal authorities by giving a common vocabulary for analysis, interpretation, and reporting. That makes it useful wherever dental evidence is examined for identity conclusions and those conclusions must be written in a standard form.

What does the ISO 21611:2026 document contain?

ISO 21611:2026 contains a short foreword, an introduction that explains why standardized terminology is needed, and Clause 3 with the actual definitions. The main technical content is grouped into general terms and terms for qualitative source conclusions.

The document also includes an index that lists each defined term with its clause number. For a user, this makes it easier to locate the exact wording to use in reports or reviews.

Because the standard is a terminology document, its main value is the set of defined expressions for comparison outcomes such as identification established, identity not excluded, inconclusive, and identity excluded. Those terms are the vocabulary used in forensic reporting on human identification by dental evidence.

Relations

Effective Date
12-Feb-2026
Effective Date
07-Jan-2025

Buy Documents

Standard

ISO 21611:2026 - Dentistry — Vocabulary for source conclusion for human identification by dental evidence

Release Date:13-Nov-2026
English language (2 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 21611:2026 - Médecine bucco-dentaire — Vocabulaire relatif aux conclusions tirées de sources pour l'identification des personnes à l'aide de preuves dentaires

Release Date:13-Nov-2026
French language (3 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

TÜV Rheinland

TÜV Rheinland is a leading international provider of technical services.

DAKKS Germany Verified

TÜV SÜD

TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.

DAKKS Germany Verified

Sponsored listings

Frequently Asked Questions

ISO 21611:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Dentistry — Vocabulary for source conclusion for human identification by dental evidence". This standard covers: This document defines the terms for the forensic reporting on human identification by dental evidence.

This document defines the terms for the forensic reporting on human identification by dental evidence.

ISO 21611:2026 is classified under the following ICS (International Classification for Standards) categories: 01.040.11 - Health care technology (Vocabularies); 11.060.01 - Dentistry in general. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 21611:2026 has the following relationships with other standards: It is inter standard links to prEN ISO 21611, ISO 8549-4:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 21611:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 21611
First edition
Dentistry — Vocabulary for source
2026-11
conclusion for human identification
by dental evidence
Médecine bucco-dentaire — Vocabulaire relatif aux conclusions
tirées de sources pour l'identification des personnes à l'aide de
preuves dentaires
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms .1
3.2 Terms related to qualitative expression of source conclusion in human identification
by dental evidence .2
Index . 3

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 3,
Terminology, in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 55, Dentistry, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
Forensic odontology holds an indis
...


Norme
internationale
ISO 21611
Première édition
Médecine bucco-dentaire —
2026-11
Vocabulaire relatif aux
conclusions tirées de sources pour
l'identification des personnes à
l'aide de preuves dentaires
Dentistry — Vocabulary for source conclusion for human
identification by dental evidence
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2026
Tous droits réservés.
La présente publication de l’ISO est protégée par le droit d’auteur et demeure la propriété de l’ISO et/ou de ses concédants de
licence.
Le contenu de la présente publication de l’ISO est fourni sous licence, et n’est pas vendu. Son utilisation est soumise aux conditions
de licence applicables définies par l’ISO, un organisme membre de l’ISO, ou un distributeur tiers agréé.
Sous réserve des besoins liés à sa mise en œuvre ou d’une autorisation expresse prévue aux termes d’une licence distincte, aucune
partie de la présente publication de l’ISO ne peut être reproduite, distribuée, modifiée, utilisée ou mise à disposition sous quelque
forme ou par quelque moyen que ce soit – électronique ou mécanique, y compris la photocopie, la numérisation, l’enregistrement
ou la publication sur des plateformes numériques internes ou externes.
Toute utilisation hors du champ d’application des droits accordés est interdite et peut donner lieu à des poursuites judiciaires.
ISO copyright office
Case postale 401 • CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
3.1 Termes généraux .1
3.2 Termes liés à l’expression qualitative d’une conclusion tirée d'une source dans
l'identification des personnes à l'aide de preuves dentaires .2
Index . 4

iii
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L'ISO attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation
d'un ou de plusieurs brevets. L'ISO ne prend pas position quant à la preuve, à la validité et à l'applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l'ISO n’avait pas
reçu notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d'avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou partie de
tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 106, Médecine bucco-dentaire, sous-
comité SC 3, Terminologie, en collaboration avec le comité technique CEN/TC 55, Médecine bucco-dentaire, du
Comité européen de normalisation (CEN), conformément à l'Accord de coopération technique entre l'ISO et
le CEN (Accord de Vienne).
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l'adresse www.iso.org/members.html.

iv
Introduction
L'odontologie médico-légale joue un rôle indispensable dans l'identification des personnes. Les données
dentaires constituent l'un des principaux éléments d'identification et revêtent donc une importance capitale
dans le processus d'identification des personne
...