ISO/FDIS 105-C09
(Main)Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
- Abstract
This part of ISO 105 specifies a method for determining the consumer relevant shade change of textiles, of all kinds, (excluding silk and wool) and in all forms, to domestic/commercial laundering procedures in which a bleach activator (oxygen bleaching system) is used. The colour fastness resulting from oxygen bleaching in this test provides an indication of the shade change behaviour observed after multiple domestic/commercial launderings. This part of ISO 105 is not applicable for the assessment of the dye staining of adjacent fabrics, where suitable methods are described in ISO 105-A04. This part of ISO 105 does not reflect the contribution of optical brighteners, which are present in some commercial washing products, to shade change. This part of ISO 105 specifies a procedure incorporating the use of ECE1) non-phosphate reference detergent, sodium perborate tetrahydrate, and the bleach activator tetra-acetylethylenediamine (TAED). An alternative test procedure using the AATCC 1993 zero phosphate reference detergent (without optical brightener), and incorporating sodium perborate monohydrate and the bleach activator sodium nonanoyloxybenzene sulphonate (SNOBS) is currently under development.
- Status
- Not Published
- Technical Committee
- ISO/TC 38/SC 1 - Tests for coloured textiles and colorants
- Drafting Committee
- ISO/TC 38/SC 1 - Tests for coloured textiles and colorants
- Current Stage
- 5000 - FDIS registered for formal approval
- Start Date
- 13-Oct-2026
- Due Date
- 28-Oct-2027
- Completion Date
- 08-Oct-2026
Buy Documents
ISO/FDIS 105-C09 - Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
REDLINE ISO/FDIS 105-C09 - Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
Relations
- Effective Date
- 12-Feb-2026
- Effective Date
- 07-Jan-2025
- Effective Date
- 07-Jan-2025
- Effective Date
- 07-Jan-2025
- Effective Date
- 07-Jan-2025
Buy Documents
ISO/FDIS 105-C09 - Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
REDLINE ISO/FDIS 105-C09 - Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
Get Certified
Connect with accredited certification bodies for this standard

Control Union Certifications
Global certification for agriculture and sustainability.
Hohenstein Institut
Textile testing and certification.

Bureau Veritas Bangladesh
Bureau Veritas certification services in Bangladesh.
Sponsored listings
Frequently Asked Questions
ISO/FDIS 105-C09 is a draft published by the International Organization for Standardization (ISO). Its full title is "Textiles — Tests for colour fastness — Part C09: Oxidative bleach response in domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator". This standard covers: This part of ISO 105 specifies a method for determining the consumer relevant shade change of textiles, of all kinds, (excluding silk and wool) and in all forms, to domestic/commercial laundering procedures in which a bleach activator (oxygen bleaching system) is used. The colour fastness resulting from oxygen bleaching in this test provides an indication of the shade change behaviour observed after multiple domestic/commercial launderings. This part of ISO 105 is not applicable for the assessment of the dye staining of adjacent fabrics, where suitable methods are described in ISO 105-A04. This part of ISO 105 does not reflect the contribution of optical brighteners, which are present in some commercial washing products, to shade change. This part of ISO 105 specifies a procedure incorporating the use of ECE1) non-phosphate reference detergent, sodium perborate tetrahydrate, and the bleach activator tetra-acetylethylenediamine (TAED). An alternative test procedure using the AATCC 1993 zero phosphate reference detergent (without optical brightener), and incorporating sodium perborate monohydrate and the bleach activator sodium nonanoyloxybenzene sulphonate (SNOBS) is currently under development.
This part of ISO 105 specifies a method for determining the consumer relevant shade change of textiles, of all kinds, (excluding silk and wool) and in all forms, to domestic/commercial laundering procedures in which a bleach activator (oxygen bleaching system) is used. The colour fastness resulting from oxygen bleaching in this test provides an indication of the shade change behaviour observed after multiple domestic/commercial launderings. This part of ISO 105 is not applicable for the assessment of the dye staining of adjacent fabrics, where suitable methods are described in ISO 105-A04. This part of ISO 105 does not reflect the contribution of optical brighteners, which are present in some commercial washing products, to shade change. This part of ISO 105 specifies a procedure incorporating the use of ECE1) non-phosphate reference detergent, sodium perborate tetrahydrate, and the bleach activator tetra-acetylethylenediamine (TAED). An alternative test procedure using the AATCC 1993 zero phosphate reference detergent (without optical brightener), and incorporating sodium perborate monohydrate and the bleach activator sodium nonanoyloxybenzene sulphonate (SNOBS) is currently under development.
ISO/FDIS 105-C09 is classified under the following ICS (International Classification for Standards) categories: 59.080.01 - Textiles in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO/FDIS 105-C09 has the following relationships with other standards: It is inter standard links to prEN ISO 105-C09, ISO 8130-16:2022, ISO 105-C09:2001, ISO 105-C09:2001/Cor 1:2002, ISO 105-C09:2001/Amd 1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO/FDIS 105-C09 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/TC 38/SC 1
Textiles — Tests for colour
Secretariat: SAC
fastness —
Voting begins on:
2026-11-23
Part C09:
Oxidative bleach response
Voting terminates on:
2027-01-04
in domestic and commercial
laundering using a non-phosphate
reference detergent incorporating a
low temperature bleach activator
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 38/SC 1
Textiles — Tests for colour
Secretariat: SAC
fastness —
Voting begins on:
Part C09:
Oxidative bleach response
Voting terminates on:
in domestic and commercial
laundering using a non-phosphate
reference detergent incorporating a
low temperature bleach activator
© ISO 2026
All rights reserved.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
an ISO member body, or an authorized third-party distributor.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
photocopying, scanning, recording, or posting on internal or external digital platforms. TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
Reference number
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents and materials . 2
6 Apparatus . 3
7 Test specimen . 3
8 Procedure . 3
9 Test report . 3
Annex A (normative) ECE non-phosphate reference detergent/TAED procedure . 4
Annex B (normative) AATCC 1993 Standard reference detergent/SNOBS procedure . 6
Bibliography . 8
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for
coloured textiles and colorants, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 248, Textiles and textile products, in accordance with the Agreement on
technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 105-C09:2001), which has been technically
revised. It also incorporates the Amendment ISO 105-C09:2001/Amd. 1:2003 and the Technical Corrigendum
ISO 105-C09:2001/Cor. 1:2002.
The main changes are as follows:
— percarbonate has been included as a bleaching agent.
ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with
publication dates between 1978 and 1985. Each part contained a series of “sections”, each designated by the
respective part letter and by a two-digit serial number (e.g. “Section A02”). These sections are now being
republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric
designations.
A list of all parts in the ISO 105 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
Introduction
The test method described in this document is intended to reflect the effect of multicycle laundering using
an activated bleach detergent by domestic and commercial laundering procedures. The washes are carried
out in a similar manner to the ISO 105-C06 tests using an activated oxygen bleach and reference detergent
at 60 °C.
A paper describing the development of this method has been published in the Journal of the Society of Dyers
[5]
& Colourists .
v
FINAL DRAFT International Standard ISO/FDIS 105-C09:2026(en)
Textiles — Tests for colour fastness —
Part C09:
Oxidative bleach response in domestic and commercial
laundering using a non-phosphate reference detergent
incorporating a low temperature bleach activator
1 Scope
This document specifies a method for determining the consumer relevant shade change of textiles, of all
kinds (excluding silk and wool), and in all forms, to domestic/commercial laundering procedures in which a
bleach activator (oxygen bleaching system) is used. The colour fastness resulting from oxygen bleaching in
this test provides an indication of the shade change behaviour observed after multiple domestic/commercial
launderings.
This document is not applicable for the assessment of the dye staining of adjacent fabrics, where suitable
methods are described in ISO 105-A04.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 105-J01, Textiles — Tests for colour fastness — Part J01: General principles for measurement of surface
colour
ISO 3696, Water for analytical laboratory use — Specification and test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Principle
A test specimen of the textile is laundered, rinsed and dried. Test specimens are laundered under specified
conditions of temperature, alkalinity and bleach concentration such that a fading result which correlates
with a multicycle machine washing is obtained in a conveniently short time. The change in colour of the test
specimen is assessed with reference to the original fabric, either with the grey scale or instrumentally.
1)
This document specifies a procedure incorporating the use of ECE non-phosphate reference
detergent, sodium perborate tetrahydrate or sodium percarbonate, and the bleach activator tetra-
acetylethylenediam
...
ISO/TC 38/SC 1
Secretariat: SAC
Date: 2026-10-1211-06
Textiles — Tests for colour fastness —
Part C09:
Oxidative bleach response in domestic and commercial
laundering using a non-phosphate reference detergent
incorporating a low temperature bleach activator
TTTThhhhiiiissss d d d drrrraftaftaftaft i i i issss s s s suuuubbbbmmmmiiiittttttttedededed t t t toooo a pa pa pa pararararallel vallel vallel vallel vooootttte e e e iiiinnnn I I I ISSSSOOOO,,,, C C C CEEEENNNN.
ISO #####-#:####(X)
© FDIS stage
2 © ISO #### – All rights reserved
All rights reserved. Unless otherwise specified,
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued
by ISO, an ISO member body, or an authorized third-party distributor.
Except as required in the context of its for implementation or expressly permitted by a separate licence, no part of this
ISO publication may be reproduced or utilized otherwise, distributed, modified, used, or made available in any form or
by any means, – electronic or mechanical, including photocopying, scanning, recording, or posting on internal or external
digital platforms.
Any use beyond the internet or an intranet, without prior written permission. Permission can be requested from either
ISO at the address below or ISO’s member body in the countryscope of the requestergranted rights is prohibited and may
result in legal action.
ISO copyright office
CP 401 • CH. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
iii
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents and materials . 2
6 Apparatus . 3
7 Test specimen . 3
8 Procedure . 3
9 Test report . 3
Annex A (normative) ECE non-phosphate reference detergent/TAED procedure . 4
Annex B (normative) AATCC 1993 Standard reference detergent/SNOBS procedure . 6
Bibliography . 8
iv
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO documentsdocument should be noted. This document was drafted in accordance with the editorial rules
of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this
document, ISO had not received notice of (a) patent(s) which may be required to implement this document.
However, implementers are cautioned that this may not represent the latest information, which may be
obtained from the patent database available at www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights. Details of any patent rights identified during the development of the
document will be in the Introduction and/or on the ISO list of patent declarations received (see ).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for
coloured textiles and colorants., in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 248, Textiles and textile products, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 105-C09:2001), which has been technically
revised. It also incorporates the Amendment ISO 105-C09:2001/Amd. 1:2003 and the Technical Corrigendum
ISO 105-C09:2001/Cor. 1:2002.
The main changes are as follows:
— — percarbonate has been included as a bleaching agent.
ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g.,. “Part A”), with
publication dates between 1978 and 1985. Each part contained a series of “sections”, each designated by the
respective part letter and by a two-digit serial number (e.g. “Section A02”). These sections are now being
republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric
designations.
A list of all parts in the ISO 105 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
Introduction
The test method described in this document is intended to reflect the effect of multicycle laundering using an
activated bleach detergent by domestic and commercial laundering procedures. The washes are carried out
in a similar manner to the ISO 105-C06 tests using an activated oxygen bleach and reference detergent at 60 °C.
A paper describing the development of this method has been published in the Journal of the Society of Dyers
[5][5]
& Colourists .
vi
Textiles — Tests for colour fastness —
Part C09: Colour fastness to
Oxidative bleach response in domestic and commercial laundering —
Oxidative bleach response using a non-phosphate reference detergent
incorporating a low temperature bleach activator
1 Scope
This document specifies a method for determining the consumer relevant shade change of textiles, of all kinds,
(excluding silk and wool)), and in all forms, to domestic/commercial laundering procedures in which a bleach
activator (oxygen bleaching system) is used. The colour fastness resulting from oxygen bleaching in this test
provides an indication of the shade change behaviour observed after multiple domestic/commercial
launderings.
This document is not applicable for the assessment of the dye staining of adjacent fabrics, where suitable
methods are described in ISO 105-A04.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 105--A02:1993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 105--J01:1997, Textiles — Tests for colour fastness — Part J01: General principles for measurement of
surface colour
ISO 3696, Water for analytical laboratory use — Specification and test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminologicalterminology databases for use in standardization at the following
addresses:
— — ISO Online browsing platform: available at https://www.iso.org/obp
— — IEC Electropedia: available at https://www.electropedia.org/
4 Principle
A test specimen of the textile is laundered, rinsed and dried. Test specimens are laundered under specified
conditions of temperature, alkalinity and bleach concentration such that a fading result which correlates with
a multicycle machine washing is obtained in a conveniently short time. The change in colour of the test
specimen is assessed with reference to the original fabric, either with the grey scale or instrumentally.
11)
This document specifies a procedure incorporating the use of ECE non-phosphate reference detergent,
sodium perborate tetrahydrate or sodium percarbonate, and the bleach activator tetra-acetylethylenediamine
(TAED) (see Annex AAnnex A)) and a procedure incorporating the use of AATCC 1993 zero phosphate
reference detergent (without optical brightener), sodium perborate monohydrate or sodium percarbonate
and the bleach activator sodium nonanoyloxybenzene sulfonate (SNOBS) (see Annex BAnnex B).).
This method has been designed for the detergents and bleach systems given. Other detergents and bleach
systems may require different conditions and levels of ingredient.
5 Reagents and materials
5.1 Reference detergent
5.1.1 5.1.1 ECE detergent formulation.
5.1.1.1 5.1.1.1 ECE non-phosphate reference detergent base powder (1998 formulation).
5.1.1.2 5.1.1.2 Bleach activator, tetra-acetylethylenediamine, TAED.
5.1.1.3 5.1.1.3 Bleach agent, Sodium perborate tetrahydrate or sodium percarbonate.
Preference is given to the use of sodium percarbonate.
NOTE As bleaching agent sodium perborate tetrahydrate and sodium percarbonate are chemically equivalent. But
sodium perbora
...







