IEC 62899-202-13:2026
(Main)Printed electronics - Part 202-13: Materials - Conductive ink - Sheet resistance measurement method for conductive layer in printed and in-mould-electronics
- Abstract
IEC 62899-202-13:2026 specifies a test pattern as well as resistance and thickness measurement methods for the conductive layer in printed and in-mould-electronics.
- Status
- Published
- Publication Date
- 02-Nov-2026
- Technical Committee
- TC 119 - Printed Electronics
- Drafting Committee
- WG 2 - TC 119/WG 2
- Current Stage
- PPUB - Publication issued
- Start Date
- 03-Nov-2026
- Completion Date
- 13-Nov-2026
Buy Documents
IEC 62899-202-13:2026 - Printed electronics - Part 202-13: Materials - Conductive ink - Sheet resistance measurement method for conductive layer in printed and in-mould-electronics
IEC 62899-202-13:2026 is an International Standard from IEC that specifies a test pattern and methods for measuring resistance and layer thickness in the conductive layer of printed electronics and in-mould-electronics (IME). It is meant for people who need to compare conductive ink performance before and after manufacturing steps such as printing, surface mounting, thermoforming, and injection moulding.
What does IEC 62899-202-13:2026 specify?
IEC 62899-202-13:2026 covers a defined test pattern, the environmental conditions for evaluation, the measurement methods, and the reporting items for conductive layers in printed electronics and IME. The document is organized into Scope, Normative references, Terms and definitions, Atmospheric conditions, Resistance and thickness measurement methods, and one informative annex with an example report.
Clause 5 is the main technical part. It sets out the test specimen layout, the measurement equipment, the procedures for different manufacturing stages, and the data analysis used to calculate sheet resistance.
What are the key requirements of IEC 62899-202-13:2026?
Test specimen and atmospheric conditions
IEC 62899-202-13:2026 requires measurements to be made under a standard atmosphere of 23 °C ± 2 °C and 50 % ± 10 % relative humidity, in line with ISO 291 class 2. This matters because resistance and thickness readings can shift with climate, so results stay comparable between laboratories.
The test specimen shall include the conductive layer, and it may also include graphic ink layers. The specified layout uses 165 squares, with a conductive line width of 0.6 mm and spacing of 0.4 mm, so users know exactly what geometry the resistance calculation is based on.
Printing, curing, and test pattern placement
IEC 62899-202-13:2026 requires the printing and curing process to follow the ink material specifications, or the best available knowledge if those specifications are not sufficient. Printing parameters and curing parameters shall be recorded in the test report because they affect thickness and resistivity.
At least 5 test specimens shall be selected after the printing process has stabilized, and they should represent the population over time and printing order. For IME parts that will be injection moulded, the pattern shall be placed on the injection moulded area and routed to a connector area so that resistance can still be measured after moulding.
Measurement equipment
IEC 62899-202-13:2026 requires four-wire resistance measurement equipment that complies with IEC 62899-202 and reads at least 3 digits. The probe shall not damage the conductive layer, and the probe pin diameter shall be 0.5 mm to 0.8 mm with a semi-spherical or flat tip and spring-controlled force.
For thickness, the document allows non-contact or probe-type equipment, but it must also support profilometry so the cross-sectional area can be shown. The thickness measurement accuracy shall be at least ±5 % in the thickness direction and ±10 % in the line width direction.
Measurement procedure by process step
IEC 62899-202-13:2026 requires resistance measurement after printing and curing from at least 30 test patterns. Thickness is measured from at least 3 samples already used for resistance measurement, with at least 20 thickness values in total.
After surface mounting, resistance measurements are optional but, if performed, they shall cover all test patterns. After thermoforming, resistance shall be measured from all test patterns when the conductive ink is intended for IME. After injection moulding, resistance measurements are optional, and if performed they shall again cover all test patterns.
Data analysis and report
IEC 62899-202-13:2026 uses the average measured resistance and the number of squares to calculate sheet resistance with printed thickness. It also defines a second value normalized to a 25 μm conductive layer, which helps compare results from layers that do not have the same thickness.
The measurement report shall include specimen information, thickness results, resistance results, and calculated sheet resistance values, each separated by manufacturing step where relevant. In practice, that means the report can be used to compare printing runs, check process stability, and track how later forming or moulding steps change the conductive layer.
What terms does IEC 62899-202-13:2026 define?
- In-mould-electronics (IME) - a 3D circuit made by integrating and embedding printed electronics and electronic components within shaped structures.
- Mesh count - the number of threads per unit length in a screen mesh, expressed in tpcm.
- Ink stack - the combination of ink layers printed on a substrate, which may include graphic ink layers, functional layers, or an insulation layer.
- Conductive layer - a film-like structure formed by printing or coating conductive ink on a substrate and post-treating it so that it conducts electricity.
- Graphic ink - a composite ink with colorants, functional components, vehicle, and additives, used to form visual layers after drying or curing.
- Four-wire resistance measurement - a resistance method that separates current supply and voltage sensing, which reduces the influence of contact resistance.
- Sheet resistance - the electrical resistance of a layer of nominally uniform thickness measured across the opposite sides of a square area.
Who uses IEC 62899-202-13:2026?
IEC 62899-202-13:2026 is used by printed electronics engineers, materials suppliers, test laboratories, and quality teams working with conductive ink layers. It is also relevant to IME manufacturers that need to check how resistance changes after surface mounting, thermoforming, or injection moulding.
Buyers and technical reviewers can use it when they need a defined test pattern and a repeatable way to ask for resistance and thickness data from suppliers. The document is especially useful where process comparison matters, because it links the measurement results to the printing order, curing conditions, and later manufacturing steps.
Which standards are used with IEC 62899-202-13:2026?
- IEC 62899-202:2023 - the normative reference for conductive ink and related test equipment requirements.
- ISO 291 - gives the standard atmosphere class used for conditioning and testing.
- IEC 62899-202-10:2023 - a related IEC part cited for the IME definition and for distinguishing this four-wire method from the 4-point probe method.
- IEC 62899-101:2019 - cited in the definitions for sheet resistance terminology.
What does the IEC 62899-202-13:2026 document contain?
The document contains a defined conductive layer test pattern, rules for specimen layout, and a table describing the ink stack. It also includes figures showing the IME manufacturing sequence, the conductive layer layout, connector routing for injection moulded parts, probe positions, and thickness measurement locations.
Clause 5 gives the measurement methods for resistance and thickness, the equipment requirements, and the calculation approach for sheet resistance. Annex A provides an informative example report with sample specimen data, thickness measurements, resistance measurements, and calculated sheet resistance values.
Buy Documents
IEC 62899-202-13:2026 - Printed electronics - Part 202-13: Materials - Conductive ink - Sheet resistance measurement method for conductive layer in printed and in-mould-electronics
Frequently Asked Questions
IEC 62899-202-13:2026 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Printed electronics - Part 202-13: Materials - Conductive ink - Sheet resistance measurement method for conductive layer in printed and in-mould-electronics". This standard covers: IEC 62899-202-13:2026 specifies a test pattern as well as resistance and thickness measurement methods for the conductive layer in printed and in-mould-electronics.
IEC 62899-202-13:2026 specifies a test pattern as well as resistance and thickness measurement methods for the conductive layer in printed and in-mould-electronics.
IEC 62899-202-13:2026 is classified under the following ICS (International Classification for Standards) categories: 31.180 - Printed circuits and boards; 87.080 - Inks. Printing inks. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 62899-202-13:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC 62899-202-13 ®
Edition 1.0 2026-11
INTERNATIONAL
STANDARD
Printed electronics -
Part 202-13: Materials - Conductive ink - Sheet resistance measurement method
for conductive layer in printed and in-mould-electronics
ICS 31.180; 87.080 ISBN 978-2-8327-1580-2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
The world's leading online dictionary on electrotechnology,
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Atmospheric conditions for evaluation and pre-conditioning . 7
5 Resistance and thickness measurement methods . 7
5.1 Measured values. 7
5.2 Test specimen . 7
5.2.1 Test pattern layout . 7
5.2.2 Test pattern printing and curing . 9
5.3 Measurement equipment . 10
5.3.1 Resistance . 10
5.3.2 Layer thickness . 10
5.4 Measurement procedure . 10
5.4.1 Resistance and layer thickness measurements after printing and curing . 10
5.4.2 Resistance measurement after surface mounting . 11
5.4.3 Resistance measurement after thermoforming . 11
5.4.4 Resistance measurements after injection moulding . 11
5.5 Data analysis . 12
5.6 Measurement report . 12
Annex A (informative) Example report . 14
A.1 Test specimen information . 14
A.2 Layer thickness measurements . 14
A.3 Resistance measurements . 15
A.4 Calculated sheet resistance values . 15
Bibliography . 16
Figure 1 – IME manufacturing processes . 4
Figure 2 – Layout of the conductive layer . 8
Figure 3 – Example of a connection that enables resistance measurement external to
the injection moulded part . 9
Figure 4 – Example of conductive layer resistance as a function of test specimen
printing order . 10
Figure 5 – Resistance measurement probe positions and layer thickness measurement
locations . 11
Figure A.1 – Conductive layer layout. 14
Figure A.2 – Example of a profilometry measurement . 15
Table 1 – Test pattern ink stack . 7
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Printed electronics -
Part 202-13: Materials - Conductive ink - Sheet resistance measurement
method for conductive layer in printed and in-mould-electronics
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 62899-202-13 has been prepared by of IEC technical committee 119: Printed Electronics.
It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
119/589/FDIS 119/600/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 62899 series, published under the general title Printed electronics,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
INTRODUCTION
Conductive layer resistance is an important characteristic when designing printed and in-mould-
electronics. A test pattern for conductive ink layer enables measuring its resistance and
thickness.
In-mould-electronics (IME) typically contains the following manufacturing processes: printing,
surface mounting of components, thermoforming and injection moulding (see Figure 1). During
these processes the conductive layer is subjected to heat, and at times, also to pressure. This
typically changes conductive layer resistance. Measuring the resistance of a test pattern after
different manufacturing steps shows how the conductive layer resistance changes.
NOTE Process 1 is printing, process 2 is surface mounting on flat film, process 3 is thermoforming and process 4
is injection moulding.
Figure 1 – IME manufacturing processes
1 Scope
This part of IEC 62899 specifies a test pattern as well as resistance and thickness measurement
methods for the conductive layer in printed and in-mould-electronics.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62899-202:2023, Printed electronics - Part 202: Materials - Conductive ink
ISO 291, Plastics - Standard atmospheres for conditioning and testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following
addresses:
– IEC Electropedia: available at https://www.electropedia.org/
– ISO Online browsing platform: available at https://www.iso.org/obp
3.1
in-mould-electronics
IME
3D circuit manufactured by integrating and embedding printed electronics and electronic
components within shaped structures
Note 1 to entry: Manufacturing steps include, but are not limited to, printing, surface mounting, thermoforming and
injection moulding.
[SOURCE: IEC 62899-202-10:2023, 3.1]
3.2
mesh count
number of threads per unit length in a screen mesh
Note 1 to entry: Mesh count is described in terms of unit tpcm (threads per centimetre).
[SOURCE: ISO 2834-3:2008 3.6, modified – Note 1 has been added.]
3.3
ink stack
combination of ink layers printed on a substrate
Note 1 to entry: Ink layers can include graphic ink layers and functional layers, or functional layers only. A stack
can also include an insulation layer.
[SOURCE: IEC 62899-202-10:2023, 3.7, modified – Replaced word "conductive" with
"functional" in the note.]
3.4
conductive layer
film-like structure f
...



