Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers

Applies to electric shavers, supplied from mains or batteries.

Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit aérien - Partie 2-8: Règles particulières pour les rasoirs électriques

S'applique aux rasoirs électriques, alimentés par le réseau ou par accumulateurs.

General Information

Status
Published
Publication Date
27-Feb-1997
Current Stage
DELPUB - Deleted Publication
Start Date
09-Mar-2020
Completion Date
31-Jul-2017

Relations

Effective Date
05-Sep-2023

Overview

IEC 60704-2-8:1997 is an international standard that specifies test procedures for determining airborne acoustical noise emitted by electric shavers intended for household and similar use. Published by the International Electrotechnical Commission (IEC), this standard applies to electric shavers powered by mains electricity or batteries, and includes shavers intended for use in residential settings as well as environments such as hotels, hospitals, shops, and offices. The document is a sector-specific addition to the broader IEC 60704 family, focusing on noise measurement to aid manufacturers, laboratories, and regulators in ensuring consistent product performance and comparability.

Key Topics

  • Scope and Applicability

    • Applies to electric shavers for domestic and similar purposes, powered by mains or rechargeable primary/secondary batteries.
    • Can also be applied to electrically-operated analogous devices such as hair clippers or depilating devices, if relevant.
  • Measurement Environment and Methods

    • Defines standardized conditions and methods for measuring the airborne sound levels emitted by shavers.
    • Simulates normal practical use of shavers while ensuring steady and reproducible results across different laboratories.
    • Emphasizes that the standard covers airborne noise only, not other forms of noise or vibration.
  • Test Setup and Equipment

    • Specifies preparations such as cleaning and lubricating the shaver as per manufacturer’s instructions or with light oil of a specified viscosity.
    • Details the need for a no-load testing condition at the shaver’s highest speed setting.
    • Outlines specific orientation and positioning of the shaver and microphone arrangement to ensure consistent sound measurement.
    • Includes requirements for battery state and operation cycles where applicable.
  • Data Recording and Reporting

    • Provides guidelines on information to be documented, including operation conditions, measurement environments, and details for reproducibility.
    • Clarifies reporting requirements for results, noting that declaration of noise emission values for product literature is outside the direct scope, with reference to IEC 704-3 for those applications.

Applications

IEC 60704-2-8 delivers significant value in several practical areas:

  • Product Design and Development
    Allows manufacturers to benchmark and optimize acoustic performance, reducing noise emissions for better consumer experience.

  • Quality Assurance and Testing
    Enables testing laboratories to perform standardized acoustic testing on electric shavers, fostering repeatable and internationally recognized results.

  • Regulatory Compliance
    Helps organizations ensure conformity to international noise standards, aiding in market access and regulatory approval in various territories.

  • Comparative Product Evaluation
    Provides a common reference for comparing the noise emissions of shavers and similar devices, supporting procurement decisions and competitive market positioning.

  • Consumer Information
    Builds confidence in product safety and performance by enabling transparent testing and reporting processes related to acoustical noise.

Related Standards

For effective implementation and broader context, the following standards are closely related to IEC 60704-2-8:

  • IEC 60704-1:1996
    Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 1: General requirements
    Serves as the foundational reference for measurement methods, terminology, and general test conditions across appliance types.

  • IEC 1254:1993
    Electric shavers for household use – Methods for measuring the performance
    Complements acoustic testing by specifying performance measurement methods for electric shavers.

  • ISO 3743-1, ISO 3743-2, ISO 3744
    International standards referenced when shavers emit pure tones, outlining additional precautions for accurate acoustic measurement.

  • IEC 60704-3
    Specifies methodologies for declaring and verifying noise emission values in product information and specifications.


Keywords: IEC 60704-2-8, electric shavers, airborne acoustical noise, noise measurement, household appliances, test code, acoustic testing, product compliance, IEC standards, appliance performance, battery-powered shavers, mains-powered shavers.

Buy Documents

Standard

IEC 60704-2-8:1997 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers Released:2/28/1997

ISBN:2-8318-3711-1
English and French language (19 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

BSMI (Bureau of Standards, Metrology and Inspection)

Taiwan's standards and inspection authority.

TAF Taiwan Verified

Sponsored listings

Frequently Asked Questions

IEC 60704-2-8:1997 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers". This standard covers: Applies to electric shavers, supplied from mains or batteries.

Applies to electric shavers, supplied from mains or batteries.

IEC 60704-2-8:1997 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 97.170 - Body care equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

IEC 60704-2-8:1997 has the following relationships with other standards: It is inter standard links to IEC 60704-2-8:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

IEC 60704-2-8:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


NORME CEI
INTERNATIONALE
IEC
60704-2-8
INTERNATIONAL
Première édition
STANDARD
First edition
1997-02
Appareils électrodomestiques et analogues –
Code d'essai pour la détermination du
bruit aérien –
Partie 2:
Règles particulières pour les rasoirs électriques
Household and similar electrical appliances –
Test code for the determination of airborne
acoustical noise –
Part 2:
Particular requirements for electric shavers

Numéro de référence
Reference number
CEI/IEC 60704-2-8 : 1997
Validité de la présente publication Validity of this publication

Le contenu technique des publications de la CEI est cons- The technical content of IEC publications is kept under

tamment revu par la CEI afin qu'il reflète l'état actuel de constant review by the IEC, thus ensuring that the content

la technique. reflects current technology.

Des renseignements relatifs à la date de reconfirmation de Information relating to the date of the reconfirmation of the

la publication sont disponibles auprès du Bureau Central de publication is available from the IEC Central Office.

la CEI.
Les renseignements relatifs à ces révisions, à l'établis- Information on the revision work, the issue of revised

sement des éditions révisées et aux amendements peuvent editions and amendments may be obtained from IEC

être obtenus auprès des Comités nationaux de la CEI et National Committees and from the following IEC

dans les documents ci-dessous: sources:
• Bulletin de la CEI • IEC Bulletin
• Annuaire de la CEI • IEC Yearbook
Publié annuellement Published yearly
• Catalogue des publications de la CEI • Catalogue of IEC publications
Publié annuellement et mis à jour régulièrement Published yearly with regular updates
Terminologie Terminology
En ce qui concerne la terminologie générale, le lecteur se For general terminology, readers are referred to IEC 50:
reportera à la CEI 50: Vocabulaire Electrotechnique Inter- International Electrotechnical Vocabulary (IEV), which is
national (VEI), qui se présente sous forme de chapitres issued in the form of separate chapters each dealing
séparés traitant chacun d'un sujet défini. Des détails with a specific field. Full details of the IEV will be
complets sur le VEI peuvent être obtenus sur demande. supplied on request. See also the IEC Multilingual
Voir également le dictionnaire multilingue de la CEI. Dictionary.
Les termes et définitions figurant dans la présente publi- The terms and definitions contained in the present publi-
cation ont été soit tirés du VEI, soit spécifiquement cation have either been taken from the IEV or have been
approuvés aux fins de cette publication. specifically approved for the purpose of this publication.
Symboles graphiques et littéraux Graphical and letter symbols
Pour les symboles graphiques, les symboles littéraux et les For graphical symbols, and letter symbols and signs
signes d'usage général approuvés par la CEI, le lecteur approved by the IEC for general use, readers are referred to
consultera: publications:
– la CEI 27: Symboles littéraux à utiliser en – IEC 27: Letter symbols to be used in electrical
électrotechnique; technology;
– la CEI 417: Symboles graphiques utilisables – IEC 417: Graphical symbols for use on
sur le matériel. Index, relevé et compilation des equipment. Index, survey and compilation of the
feuilles individuelles; single sheets;
– la CEI 617: Symboles graphiques pour schémas; – IEC 617: Graphical symbols for diagrams;

et pour les appareils électromédicaux, and for medical electrical equipment,
– la CEI 878: Symboles graphiques pour – IEC 878: Graphical symbols for electromedical
équipements électriques en pratique médicale. equipment in medical practice.
Les symboles et signes contenus dans la présente publi- The symbols and signs contained in the present publication
cation ont été soit tirés de la CEI 27, de la CEI 417, de la have either been taken from IEC 27, IEC 417, IEC 617
CEI 617 et/ou de la CEI 878, soit spécifiquement approuvés and/or IEC 878, or have been specifically approved for the
aux fins de cette publication. purpose of this publication.
Publications de la CEI établies par le IEC publications prepared by the same
même comité d'études technical committee
L'attention du lecteur est attirée sur les listes figurant à la fin The attention of readers is drawn to the end pages of this
de cette publication, qui énumèrent les publications de la publication which list the IEC publications issued by the
CEI préparées par le comité d'études qui a établi la technical committee which has prepared the present
présente publication. publication.

NORME
CEI
INTERNATIONALE
IEC
60704-2-8
INTERNATIONAL
Première édition
STANDARD
First edition
1997-02
Appareils électrodomestiques et analogues –
Code d'essai pour la détermination du
bruit aérien –
Partie 2:
Règles particulières pour les rasoirs électriques
Household and similar electrical appliances –
Test code for the determination of airborne
acoustical noise –
Part 2:
Particular requirements for electric shavers

 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni utilisée No part of this publication may be reproduced or utilized in
sous quelque forme que ce soit et par aucun procédé, électronique any form or by any means, electronic or mechanical, including
ou mécanique, y compris la photocopie et les microfilms, sans photocopying and microfilm, without permission in writing from
l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE K
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60704-2-8 © CEI:1997
SOMMAIRE
Pages
AVANT-PROPOS. 4

INTRODUCTION. 8

Articles
1 Domaine d'application et objet . 10
2 Références normatives . 10
3 Termes et définitions. 12
4 Méthodes de mesure et environnements acoustiques. 12
5 Appareillage. 12
6 Fonctionnement et emplacement des appareils en essai. 12
7 Mesure des niveaux de pression acoustique . 16
8 Calcul des niveaux de pression acoustique et de puissance acoustique. 16
9 Informations à enregistrer . 16
10 Informations à fournir . 16
Annexe
B Table d'essai normalisée. 18

60704-2-8 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD . 5

INTRODUCTION. 9

Clause
1 Scope and object. 11
2 Normative references. 11
3 Terms and definitions. 13
4 Measurement methods and acoustical environments. 13
5 Instrumentation. 13
6 Operation and location of appliances under test. 13
7 Measurement of sound pressure levels . 17
8 Calculation of sound pressure and sound power levels. 17
9 Information to be recorded . 17
10 Information to be reported. 17
Annex
B Standard test table . 19

– 4 – 60704-2-8 © CEI:1997
COMMISSION ÉLECTROTECNIQUE INTERNATIONALE

_________
APPAREILS ÉLECTRODOMESTIQUES ET ANALOGUES –

CODE D'ESSAI POUR LA DÉTERMINATION DU BRUIT AÉRIEN –

Partie 2: Règles particulières pour les rasoirs électriques

AVANT-PROPOS
1) La CEI (Commission Electrotechnique Internationale) est une organisation mondiale de normalisation composée
de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a pour objet de
favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de
l'électricité et de l'électronique. A cet effet, la CEI, entre autres activités, publie des Normes Internationales.
Leur élaboration est confiée à des comités d'études, aux travaux desquels tout Comité national intéressé par le
sujet traité peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec la CEI, participent également aux travaux. La CEI collabore étroitement avec l'Organisation
Internationale de Normalisation (ISO), selon des conditions fixées par accord entre les deux organisations.
2) Les décisions ou accords officiels de la CEI concernant les questions techniques, représentent, dans la mesure
du possible un accord international sur les sujets étudiés, étant donné que les Comités nationaux intéressés
sont représentés dans chaque comité d’études.
3) Les documents produits se présentent sous la forme de recommandations internationales. Ils sont publiés
comme normes, rapports techniques ou guides et agréés comme tels par les Comités nationaux.
4) Dans le but d'encourager l'unification internationale, les Comités nationaux de la CEI s'engagent à appliquer de
façon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes
nationales et régionales. Toute divergence entre la norme CEI et la norme nationale ou régionale
correspondante doit être indiquée en termes clairs dans cette dernière.
5) La CEI n’a fixé aucune procédure concernant le marquage comme indication d’approbation et sa responsabilité
n’est pas engagée quand un matériel est déclaré conforme à l’une de ses normes.
6) L’attention est attirée sur le fait que certains des éléments de la présente Norme internationale peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. La CEI ne saurait être tenue pour
responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence.
La Norme internationale CEI 60704-2-8 a été établie par le comité d'études 59 de la CEI:
Aptitude à la fonction des appareils électrodomestiques.
Le texte de cette norme est issu des documents suivants:
FDIS Rapport de vote
59/155/FDIS 59/174/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cette norme.
Cette partie 2 est destinée à être utilisée conjointement avec la CEI 704-1, deuxième édition
(1996): Appareils électrodomestiques et analogues – Code d'essai pour la détermination du
bruit aérien – Partie 1: Règles générales.

60704-2-8 © IEC:1997 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

_________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –

TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE –

Part 2: Particular requirements for electric shavers

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60704-2-8 has been prepared by IEC technical committee 59:
Performance of household electrical appliances.
The text of this standard is based on the following documents:
FDIS Report on voting
59/155/FDIS 59/174/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This Part 2 is intended to be used in conjunction with IEC 704-1, 2nd edition (1996): Household
and similar electrical appliances – Test code for the determination of airborne acoustical noise
– Part 1: General requirements.

– 6 – 60704-2-8 © CEI:1997
Le texte correspondant de la partie 1 modifié par la présente norme, établit le code d'essai

pour les rasoirs électriques.
Les articles de cette partie 2 complètent ou modifient les articles correspondants de la

CEI 704-1. Lorsqu'un paragraphe particulier de la partie 1 n’est pas mentionné dans cette

partie 2, ce paragraphe s´applique pour autant qu’il est raisonnable. Lorsque cette partie 2

spécifie «addition», «modification» ou «remplacement», la prescription, la modalité d´essai ou
le commentaire correspondants de la partie 1 doivent être adaptés en conséquence.

Les paragraphes ou les figures complémentaires à ceux de la partie 1 sont numérotés à partir
de 101. Les annexes complémentaires sont appelées AA, BB,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...